IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese Tmep-6090 Vacuum Exposure Film Machine for Screen Printing Plate1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Exposure MachineVacuum Exposure Film MachineVacuum Exposure Machine
Shenzhen Tamprinter Printing Machin
Preview:
Product Description TMEP-6090 Vacuum Exposure Film Machine For Screen Printing Platevideo link:http://tamprinter.en.made-in-china.comTechnical Parameter:TMEP-6090 Desktop vacuum Exposure Unit For screen printing plateTMEP-8090 Desktop medium vacuum screen printing plate UV Exposure machine / Shai Banji Working table type10mm High transmittance Glass10mm High transmittance GlassRubber cavity Area600×900mm800×900mmMax frame size500×800mm700×800mmLamp wattage220V, 30W*10pcs+pump=450w220V, 30W*12pcs+pump=510wVacuum degree-0.01~ -0.08mpa-0.01~ -0.08mpaIllumination uniformity100%100%Dimension820*1000*300mm900*1200*300mmPlate typePad printing plate, ZN-Plate, Cooperplate, Polymer plate, screen framepad printing cliche,screen printing plate Weight71kg81kgMachine shape and main structures:1. Cover plate support bar2. Black rubber sheet3. Locking handle4. Operation panel5. Door lock6. Adjustable supporting foot7. CastersPerformance characteristics:1. Adopting imported high-quality lamp (PHILIPS), long life, high light efficiency, accurate spectral output.2. After power on, it can start-up instantly and also with automatic vacuum adsorption, exposing and other functions.3. Highly vacuumed vacuum pump, high precision, stable performance, which ensures the close combination between the screen and the sample map, drying out of the screen pattern more clear and realistic.4. Micro-motor controlled built-in exposure light shade; shading board out when exposing and shading board back when replacing screen, which can save time for replacing screen without switch exposure button.Working principle:The use of vacuum pump pumping, pumping out of the air between glass table and the black rubber blanket to form a negative pressure, and rubber blankets are negative pressure will compress the screen, film, and then through the role of ultraviolet light can copy clear pictures. Main components and functionsOperation panel assembly1. Power indicator: This indicator lights when the machine is powered on.2. Suction start button: press this button; the vacuum pump began to inhale.3. UV lamp start indication: press the "UV light start" button this indicator light.4. Exposure start indication: Press the "Exposure start" buttons this indicator lights.5. Exposure time setting: Set the exposure time.6. Exposure start button: Press this button to start the exposure.7. UV Lamp Start button: Press this button to activate the exposure lamp.8. Suction stop button: Press this button to stop the vacuum pump.9. Power switch: press the machine power on and off.Internal components1.Vacuum pump: sucking the air between the screen and the film, so that the screen and film fit tightly.2.Ballast: Pulse high voltage at start of exposing.Internal components II1.Exhaust fan: remove the hot air in the exposure machine.2.Lighting neon: Lighting when placing the film and screen.Internal components III1.Micro-motor: control the in and out of exposure lights shade board.Worktable glass1.Worktable glass: Place the film and screen2.Exposure lights are installed: Exposure light sourceMaintenance and precautions1.When exposing, the glass surface must be kept clean, no scratches. Rubber blanket cannot be with the thinner, battery water and other Solvent contact.2.Before the exposing, if the grease or tape and other stolen goods stick to the glass, can be wiped with water and alcohol to avoid the shadow affect the exposure quality.3.In the use of UV exposure lights, should pay special attention to: each exposure is completed, should wait 15 to 50 minutes, to be purple outside the light a little cooling down in order to carry out the second exposing. Otherwise, the UV light will not start, and shortened life of UV lamps.4.Covering the screen with the middle hardness of rubber blanket, can extend the life of rubber blankets.5.Half a year should check the circuit, vacuum pump once, and make the grounding resistance less than 4 ohms.6.Lamp issued by the strong ultraviolet spectrum, the operator in the normal work, should not be directly in contact with the light, ensured safety and health of the operator.7.When the lamp is triggered, the trigger voltage is high and should be well grounded to ensure safe operation.8.Replace the lampCautions:Be sure to turn off the unit before replacing the lamp. When the lamp is used for a long time, the light effect is too low or the trigger is not lit, the new lamp should be replaced. Method is to remove the lamp from the column, hand from the light box into the lamp cover below, so flip down, loosen the fixed screw, the lamp carefully removed from the marble, and then the new lamp from the new fixed You can, the stain on the tube, cotton can be dipped in a little alcohol gently scrub clean.Instructions1.First of all, the power line drawn from the exposure machine connected to the three-phase four-wire 380V power supply, and the power (line voltage) wave cannot exceed 380V +10 V, the best of the body to a good grounding, and the grounding resistance is less than 4 ohms.2.Wipe glass clean with water or alcohol, so as not to have the impact of product exposure quality.3.Turn on the power; turn on the lamp under the glass, and operating the fan.4.Place the patterned film face up in the middle of the glass, fix it with a clear tape, and apply the soaked and dried the screen on the good position, positive pressure on the film.5. Place the end of the suction pipe fixed on the edge of the suction port in the center of the screen. The role is to screen the central air pumping, forming a vacuum, so that the screen can be evenly pressed film film, so as to clear lines out, pattern beautiful online version.6. Close the cover7. Exposure time generally takes more than ten or several tens of seconds. Line fine, tone level rich film, exposure time correspondingly shortened; the opposite line rough, large pattern area, exposure time corresponding to extend some. In addition, different exposure requirements, different film, different photosensitive pulp and if exposure machine suing too long, exposure time are not the same should be based on practical experience to choose.8. After the exposure time is determined, press the "Suction Start" button to make the vacuum pump work, until the vacuum pump to completely remove the air inside the frame, check the screen has been pressed on the film, can press the "exposure start" Button, so that the UV exposure light. When the "exposure start indicator" is on, after the delay, you can press the "exposure start" button. At this time, the exposure time setting relay starts the standby work when the "exposure start" button is pressed, and the time to reach the exposure time, the exposure end, the vacuum pump and the exposure are automatically stopped.9. Open the cover; remove the screen for rinsing, exposure process complete. Fault repair(1). Turn on the power switch and the fan does not work1. Check if the floor fuses are loose or blown.2. Check whether the fan capacitor burns, fan blades are deformed, the fan is bad.3. Whether the plug is loose or welding is not strong.(2). Put down the screen frame, the vacuum pump does not work1. Check if the wiring of the vacuum pump is off.2. Check that the vacuum pump base switch is open.3. Check that the delay on the panel timer is faulty or the backplane contactor is not working.(3). Vacuum pump work, vacuum cannot reach standard1. Check that the suction pipe on the vacuum pump is plugged in.2. Check if the oil level of the vacuum pump is too low3. Check the battery valve is working properly (vacuum pump open, solenoid valve closed, suction; vacuum pump, electromagnetic the valve opens and deflates.)4. Check the rubber on the side of the tape if there are cracks, shedding and so on.5. When printing large plate, should extend the inspiratory time.(4). Press the trigger switch, the lamp does not light1. Check if the supply voltage is too low.2. Check whether the ends of the lamp are black and the lamp is aged.3. After the use of UV light, the fan cooling lamp is up to 1 to 2 minutes (due to continuous UV lamp using the cooling time is short, the lamp does not light up.)4. Check whether the trigger is aging, with or without high pressure.5. Check whether the 60A solvent is blown.6. Check whether the two thick wires of the connector are off(5). Lamp light, vacuum pump work, but the PS version cannot work properly.1. Check the lamp is full power work (current is generally between 8 ~ 12A normal)2. Check the vacuum pump trachea can reach 0.08Mpa below, if not reached should be checked according to Article 3 above.3. Check that the lamp is in its lifetime or no UV spectrum.4. Check whether the exposure time is accurate, the quality of the media, the concentration of the developer is met.(6). LeakageFirst check whether there is obvious ground o phenomenon, the fan is leakage, the capacitor is breakdown, and then check the light box flip lamp cover (that is, light cover), when Turn on or off whether it touches the leads at both ends of the lamp.(7). Please refer to the electrical schematics for each unit code.(8). Exposure Machine should be installed in a well ventilated place to keep the machine clean andoperated by special personnel.(9).Features:1. Easy and convenient to operate as the cycle of vacuuming, exposing and air exhausting are 2.automatically completed with one single control.3. Air cooling for the lamp and the system4. Automatic operating way5. Clear digital display time setting, precise automatic exposure time controlUV-LED line light exposure machine advantages: 1, long life: life is more than 10 times that of traditional iodine gallium lamp funnel type exposure machine, about 25,000 to 30,000 hours. 2, cold light, no heat radiation, according to the film surface temperature is low, resolved exposure work long-standing problem of heat deformation affects line accuracy. Especially for high precision film exposure requirements applicable to small temperature rise of the occasion. 3, heat a small, solve the gallium lamp heat, staff in clean room unbearable problem. 4, instant light, no warm-up instantly reach 100% power UV output. 5, from the opening and closing times on long life. 6, high energy, light output stable, good illumination uniformity effect. 7, the effective radiation area size can be customized . 8, the maximum illumination intensity of up to 6000mw / cm2. 9, it does not produce ozone, it is to replace traditional light source technology a safer, more environmentally friendly choice. 10, low energy consumption, power consumption is only 10% of the traditional uv lamp type exposure machine can save 90% power. 11, small size, easy to carry, and only 1/8 the size of traditional funnel exposure machine. 12, the maintenance cost is almost zero, using Tamprinter UV-LED equipment annual savings of at least 1,000 $ / SET supplies costsPls contact us if you have any question!
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...