IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese PU/PVC Air Cooling Conveyor Belt Splicing Vulcanizing Press Machine1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Other Rubber MachineryHot Splicing PVC PULightweight Vulcanizer with PVC
Themax Industrial Power Machinery Qingdao Co., Ltd.
Preview:
Product Description Product DescriptionModel NO.PA300/600/900/1200/1500/1500H/1800HSpecification300/600/900/1200/1500/1800/2100/2400mmTrademarkANTAIOriginChinaHS Code8477800000ANTAI PVC Hot Air Vulcanization Heat Press MachineThe All In One Splice Press with air cooling system. This air cooled press has all components integrated into the tool, allowing a user to simply plug it into electricity and it is ready for use. Fast Splicing and is Portable Splice Press, easy to bring to anywhere.Introduction to the Splice PressThe splice press is an all-in-one solution for splicing thermoplastic conveyor belts (e.g. PVC polyurethane).No external control box, air pump, or water cooling tank are required.The presses are provided with electric heating and built in air cooling. The splice process runs fully automated.? Splice pressure is applied by an internal compressor, max. 2 bar (28 psi)? Heats up to a splice temperature of max. 200°C (392°F)? Keeps it at the splice temperature (adjustable dwell time)? Cools down to the cooling temperature (safe temperature to take the belt out)? For thicker belts a preheat temperature and preheat dwell time can be applied? The bottom heating can be set lower or higher than the top heating? The splice surface is 130 mm ; the heated zone is 110 mm.If the belt is relatively thick a problem might occur where the outside of the belt is at the splicing temperature too long,waiting for the inside to reach the required temperature. Molten material might flow away or discolor and fabrics might shrink. To avoid this problem from happening, the preheat option can be used. This option heats the belt up (outside and inside) to a temperature just below the melting temperature. After the preheat stage, the inside splice temperature can be reached much quicker, minimizing the risk for unwanted flow of material, discoloring or fabric shrinkage.The reading of the display relates to the top temperature of the press. If more or less heat is required at the bottom of the belt, the "bottom heat factor" can be used. Please note that this factor relates to a plus or minus amount of heat (%), not to aspecific temperature.presses are available in 5 different sizes:? 300 mm effective (12")? 600 mm effective (24")? 900 mm effective (36")? 1200 mm effective (48")? 1500 mm effective (60")presses function on different voltagesSpecificationModel30060090012001500Effective length305mm / 12″610mm / 24″914mm / 36″1219 mm / 48″1524 mm / 60″Effective width120mm / 4.7″120mm / 4.7″120mm / 4.7″120 mm / 4.7″120 mm / 4.7″Weight lower part11.5 kg18kg23kg28.5 kg32 kgWeight upper part12kg13kg18kg25.5 kg30 kgTotal weight21kg30kg38kg54 kg62 kgOverall height220mm225mm225mm225mm225mmMax. pressure2 Bar / 28 PSI2 Bar / 28 PSI2 Bar / 28 PSI2 Bar / 28 PSI2 Bar / 28 PSIMax. temperature200 oC/390 oF200 oC/ 390 oF200 oC/ 390 oF200 oC/ 390 oF200 oC/ 390 oFPackaging list(L x W x H)790x430x420mm1090x430x420mm1390x430x420mm1720*450*430mm2030*470*410mmGross weight50 kg72 kg85kg104 kg127 kgPackaging & ShippingOur ServicesANTAI is the leading manufacturer of conveyor belt vulcanizing equipment. ANTAI has been offering unique Sectional Vulcanizing Systems that provide strong, long-lasting splices, for over 27 years in china.The Unique and Innovative belt splicing system designed to be portable and offer maximum versatility in splicing all types and sizes of conveyor belting. It's intelligent, modular design and vast array of unique operating features, can handle all types of belt designs in every conveyor application.The PA series belt vulcanizing machine (hereinafter referred to as vulcanizer) is an electrothermal type vulcanizing device used for on-site splicing of conveyor belts. With the advantages of advanced technology, compact structure and convenient usage, it's used for the vulcanized jointing of the belts mixed with canvas, nylon, steel cord, etc., and it's also suitable for the flame retarded, corrosion proof and other special belts. The application area of this kind of vulcanizer is very wide, it can be used in metallurgy, mining, power plant, port and wharf, building material factory, chemical factory and so on.The Sectional vulcanizer offers equipment, which is portable and easy to set-up and remove from the site. It has accurate control and indication uniform temperature due to the unique element design and uniform pressure over the entire splice area. Components in this model are lightweight and easy to assemble.Payment Terms: 30% deposit,70% T/T before shipmentDelivery Time: delivery 3~7 working days after receiving the depositProduction Capacity:50 sets per dayTransportation: by seaPacking Detail: Carton and wooden box. Or according to the customer's requirements.Guaranteed to customers:1) All Material we use is of high or medium quality and environment friendly.2) High and medium quality products only.3) We seriously check every item before shipment.4) Best service, most reasonable price and sincerity for customersFeedback:Customer satisfaction is very important to us. If you are satisfied with the items you ordered, please leave feedback. If you are not satisfied with the items you ordered, please contact us before leaving negative feedback. We can work together to resolve any dispute.Tips:If your company is interested in any of our products, or you have a specific requirement for any of our items, please do not,hesitate to contact us.Company InformationQingdao Antai Mining Equipment Co., Ltd. is a manufacturer and international supplier of compounts for conveyor belt and wear protection technology and provides worldwide services for conveyor belt systems.Our products mainly including special Cold Vulcanized Adhesive and Solvent,Hot Splicing Jointing Materials ,Pully lagging Materials ,Rubber Skrit, Impact Device (impact bar/impact bed ), UHMW-PE Rubber,Vulcanized Machine/Press,Conveyor Pully Rollers&Idler,Conveyor Belt Cleaner and Special Tools.Antai products have been exported in Europe, Southeast Asia, the Middle East and North America, and occupied a place in intensely competitive global market. The products include all aspects of stuff related on conveyor belt splicing and vulcanizing.Our professional team of conveyor belt maintenance provides excellent and efficient operating in fields of splicing,vulcanizing,repairing and lagging. We sincerely welcome all good friends to cooperate with us.Conveyor belt vulcanizer, also called conveyor belt vulcanizing press or belt vulcanizing press machine. It's vulcanize equipment and tools for repairing & splicing of conveyor belt. It suits for various conveyor belt, such as EP, Rubber, Nylon, Canvas and Steel cord belt, etc.The belt vulcanizer is dependable, lightweight and portable machine, which is widely used in the field of metallurgy, mining,power plants, ports, building materials, cement, coal mine, chemical industry, etc. Heating plates are available for rhombic,rectangular and modular type (two or more sets of heating plates together).FAQ01) Q: Normal delivery time?A: We have table produce line, hot sale products normally HAVE STOCK. If customized, need about 15 working days02) Q: Will you test the machine before shipping?A: Yes, each machine, we will install and test before shipping. And testing pressure is higher than working pressure.03) Q: Can you print our logo or without any logo?A: It's no problem OEM. Before order, please send us the clear document of your logo, also the authorization paper to allow us to print your logo.04) Q: Whether can visit your workshop and to see how to process the machine?A: No problems, you are always welcomed to visit us, before order or before shipping.If need to see how to process the machines,please inform us what type machines you want to see, we will try to prepare the similar machines ready before you come.05) Q: What's the payment term?A:Normally we accept T/T 30% as deposit before production, pay the rest before delivery.We also accept VISA vis Credit Assurance, Paypal and L/C.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...