IPDB › China Industry › Manufacturing & Processing Machinery
China, Chinese Factory Direct Magnetic Tensioner Magnetic Damping Tensioner Winding Machine Tensioner1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Winding MachineTensionerFriction Tensioner
Henan Windoo Industry Co., Ltd.
Preview:
Product Description Product DescriptionThe tensioner is a key part of the winding machine. It generates adjustable tension during winding so that the enameled wire is wound with appropriate tension, so that the wound coil is tight and compact, and the coil technical indicators are consistent.The mechanical tensioner is the key component of the winding machine to generate adjustable tension during winding, so that the enameled wire has suitable tension when winding, so that the wound coil is tight and suitable for tightness and fullness, ensuring the technical indicators of the coil. Consistency. Precautions for UsePrecautions:1. This product is assembled with precision parts, please do not disassemble.2. The spring should be as small as possible. The goal is to ensure that the rubber wheel rotates and the line does not slip.3. There should be a 1~2MM gap between the rubber wheel and the adjusting ring.The magnetic tensioner (magnetic tension controller) is used on the winding machine and uses a permanent magnet to generate tension on the damping wheel.The non-contact mechanism design provides stable, consistent and precise tension to the wire. Both high and normal speed winding is excellent.Precautions for use:1. If it is not used for a long time, it should be demagnetized before starting the machine. First, lower the tension adjustment knob clockwise, then turn it counterclockwise. At the same time, hold the line damping wheel lightly to prevent it from turning.2. Adjust the tension knob cover (increase tension, decrease tension). First, feel the damping force of the large guide wheel by hand. When working, test the exact tension on the enameled wire with a tensiometer, and adjust the tension adjustment knob as needed.3. Adjust the anti-tension adjustment knob to ensure that the tension rod is in a horizontal state during normal operation.4. During normal operation, only the tension is allowed to be small (the tension adjustment knob is screwed in), and the tension is not allowed to be small (the tension adjustment knob is turned outward).AdvantageTensioner advantages:1. The damping tensioner is a device that uses the field as the medium to transmit constant torque. The damping disc is not in contact with the valve disc, there is no sliding friction, the service life is long, and the tension control is extremely stable.2. Rotating parts are precision machined from lightweight and strong materials with minimal moment of inertia.3. The tension output rubber wheel is made of elastic soft rubber, which does not hurt the wire.4. The metal parts are treated with anti-rust and have excellent corrosion resistance.5. The installation structure is simple, the tension adjustment is convenient, the structure is compact, the size is compact, and the operation is stable in various positionsTensioner adjustment method:1. It is recommended to adjust the scale value to 3 and above. If the tension is too high at this point, it is better to use a smaller size damper.2. If it is used below the 3 scale value, there may be strong pulsation. Eliminate the pulsation as described in item 3 below.3. Loosen the fastening screw, turn the scale to 10, slowly turn the scale to 0 while rotating the spindle, and then turn to the desired scale value. Tighten the locking screw.4. If tension pulsation occurs during use, please repeat the steps of adjustment method 3 above until a satisfactory tension is obtained.5. The damper uses an electric field to generate a dielectric field, and the material is fragile. Therefore, do not disassemble it during use to avoid damage to the machine.Detailed PhotosProduct ParametersModelUse Wire Range(mm)Tension Range(g)WDT010.02-0.042.5-14WDT020.03-0.066.0-30WDT030.04-0.089.0-50WDT040.06-0.1420-130WDT050.08-0.1640-200WDT060.16-0.2590-500WDT070.12-0.4070-600WDT080.20-0.60200-2000WDT090.50-1.201000-5000WDT100.60-2.002000-1000Precautions for the use of mechanical tensioner:1. Precautions for the use of TC mechanical tensioner: 1. After the adjustment, the working angle of the tension rod at the beginning of work is the same as the angle of the static installation, or when the tension rod sags down to 90 degrees after the start of work, be sure to re-adjust the tension, so as not to cause abnormal wear and tear of various parts of the tensioner, and reduce the service life.2. When the tensioner is in normal use when replacing the enameled wire, please check whether there is any residual enameled wire breakage on the damping wheel, and be sure to remove it, otherwise, the winding wheel will be rolled into the damping wheel when the machine is turned on again, causing irregular changes in tension.After Sales Service1. We provide you with a friendly English User manual or operating videos for free.2.24 hours of technical support by email or call.3. Warranty: 1 year free, 2-3 years cost price, and free technical support always.4. Free training to make sure you master the operation of our products.Service tenetProvide you the best service with "fast + satisfactory + safe".Warranty period:12 months long after the user received the product.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...