IPDB › China Industry › Instruments & Meters
China, Chinese Bsi Km Ukca NF Wireless Smoke Detectors En14604 Interlinked Smoke Alarms for Scotland1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Fire ControlFire Alarm Smoke DetectorSmoke AlarmFire Alarm
Zhejiang Jiaboer Electronic Technology Co., Ltd.
Preview:
Product Description Built-in 3V lithium battery photoelectric smoke alarm with RF functionTechnical Specifications:Power Source DC 3V batteryLow Voltage Threshold ≤2.6VOperation Current ≤8uAHush time 8minutesAlarm Sensitivity 0.10 - 0.16dB/mProduct service life >10 yearsComply with standardEN 14604:2005/AC:2008Humidity Range < 93% relative humidity (RH)Alarm Current ≤60mATemperature Range 0oC to 40oCAlarm Volume >85dB(A) @ 3 meters.Size120mm in diameter x 36.6mm depthSound Pattern (BI 0.5s - pause 0.5s - BI 0.5s - pause 0.5s - BI 0.5s - pause 1.5s, with the RED LED flash, repeat this alarm pattern)Details of the product function:Standby modeAfter the product is installed, if the smoke alarm device operate properly, the red LED flashes once every 48 secondsAlarm modeWhen the smoke alarm device detect particles of combustion and the concentration of smoke reaches the alarm threshold, the red LED will flash once per second with pulsating alarm until the smoke is disappearedLow battery modeWhen the battery voltage bleow threshold, the red LED will flash once every 48 seconds with a sound of "chrip"Fault modeIf the alarm detection signal decays below threshold, the alarm chirp occurs without LED flashes every 48 secondsSilence modePress the test button at least 2 seconds, it will go into silence mode for approx 8 minutes. That will desensitize the alarm sensitivity temporarily. At this time, the red LED will flash once every 8 secondsNon disturb modeWhen the alarm device is in low battery mode, in order to avoid disturbing your at night, Please press the test button for 3 seconds which will mute this warning tone for about 14 hours. The red LED will flash once every 48 seconds during No disturb mode.Test modeTest the unit to ensure operate properly by pressing the test button. At this time, the red LED will flash once per second with pulsating alarm until test button is releasedNOTEWEEKLY TESTING IS REQUIRED
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...