IPDB › China Industry › Manufacturing & Processing Machinery › Assembly Line & Production Line
China, Chinese TMAXCN Brand Versatile Roll to Roll Large Coating Machine for Electrode1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Assembly Line Production LineBuilding Materials Production LineLab Coating MachineRoll to Roll Coating
Xiamen Tmax Battery Equipments Limited
Preview:
Product Description Large Versatile Roll to Roll Pilot Coating Machine TMAX-AFA-MC400 is a versatile roll to roll coating machine system which can adapt various coating heads such as reverse comma blade, Doctor Blade, Slot Die and Micro Gravure and Tape Casting. A 4.5 meters long, three zone convection drying oven with independent temperature programming is implemented for efficient slurry curing. This is the most complete and universal pilot coating system that provides a broad adaptability to various coating slurries and film substrates (Cu, Al, PET, PP, PE). Doctor Blade: Cost effective solution for 8~200 micron thick coatings (Continuous mode only)Reverse Comma Blade (Transfer Coating): Cost effective solution for 30~200 micron thick coatings (Both continuous & intermittence mode)Tape Cast Coating: Ideal for performing thicker coating up to 1000 microns with high viscosity slurryMicro-Gravure: Perfectly suitable for precise thin coatings from 1~3 microns (dry film thickness)Slot Die: Suitable for precision coatings as thin as 1 micron while providing a wide coverage for thicker coatings upto 200 micronsSpecifications:Working Voltage110 - 240 VAC, 50/60 Hz, three Phase (380VAC three phase is available upon request)Max. Power Consumption30-35 KW ( 50A Air breaker required )Compressed Air 0.5-0.9 MPa is required (Air compressor not included. Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. pic1 pic2 Reeling/Unreeling Diameter350mm O.D Max. Reeling/Unreeling shaft diameter: 3 inchesCoating Width350mm Max.Coating SpeedMax.5000mm/minCoating HeadsReverse Comma BladeDoctor BladeTape CastingSlot DieMicro-GravureDoctor Blade Coating Continuous coating mode onlyCoating thickness range: 10~200um ( dried film )Typical slurry viscosity range: 500~10000 mPa.sPrecision: ±5μm (gap adjustment solution 1um); Edge to center thickness tolerance +/-8umMSK-155 auto-slurry feeder with 2 liters tank is available at extra cost, please click underline to view details. Reverse Comma Blade (Transfer Coating)Two available coating modes (continuous and intermittent) selectable on the control panel.Coating thickness range: 30~200um ( dried film )Typical slurry viscosity range: 500~10000 mPa.sPrecision: ±3μm; Edge to center thickness tolerance +/-5umMSK-155 auto-slurry feeder with 2 liters tank is available at extra cost, please click underline to view details. Cast CoatingTape casting technique is ideal for handling thicker slurry 5000~20000 mPa.s and thus thicker film coating is achievable (up to 1000um)Continuous coating mode onlyPrecision: ±5μm (gap adjustment solution 1um); Edge to center thickness tolerance +/-8um MSK-156 slurry feeding screw pump with 4 liters tank is included, please click underline to view detailsSlot Die coating The slot die is perfect for uniform film coating of 1 micron and up to 200-micron thickness. By changing the shim size with various patterns, you would be able to produce continuous, intermittent, or even grid coatings that match the shim patterns. Please refer to the pictures in below for more details: Slurry feeding screw pump with 4 liters tank is included, please click underline to view detailsMinimum thickness & precision: 1 μm ( dried film ), ±1% Typical slurry viscosity range: 200~10000 mPa.sAttention: The final coating thickness is dependent on a wide range of parameters such as slurry viscosity, solid particle size, solid content, shim thickness, foil rolling speed and slurry feeding rate. Therefore, we are not able to guarantee that 1-micron level film is achievable for all kinds of slurries. For further discussion, please let us know your slurry specs and coating thickness requirement.Micro-Gravure CoatingContinuous and intermittent coating modes are available for the user.Coating thickness range: 1~3um ( dried film )Typical slurry viscosity range: 30~1000 mPa.sauto-slurry feeder with 2 liters tank is includedConvection Drying Oven Three zone design with independent temperature controllers.Air flow rate:9.5/2800 ( cm3/RPM ) max. for a single zone, flow rate adjustableDrying temperature: 150°C max ±5oCPower Consumption: 9KW for single zone (27KW total)Heater length: 1.5m for single zone (4.5m total) Product DimensionsL6800mm x W1200mm x H1900mmComplianceCE Certified WarrantyTwo Year limited warranty with lifetime supportRusting and damage due to improper storage condition or maintenance are not covered by warrantyApplication NotesCustomers are welcome to visit our facility to receive technical training before shipping of equipment Net Weight13t
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...