IPDB › China Industry › Tools & Hardware
China, Chinese Pneumatic Handheld Screw Fastening Machine1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Pneumatic ToolsPneumatic ScrewdriverScrew Fastening MachinePneumatic Screwdriver
Topbest Technology Limited
Preview:
Product Description Pneumatic handheld screw fastening machineModel: TBS-SC-2S Pneumatic screwdriverSPECIFICATIONSItemParameters/DescriptionCompatible Bit Size1/4 inInlet size1/4 inMaximum Speed2000 rpmMaximum Torque80 in·lbAir Pressure90 psiAir Consumption30 cfmHandle StylePistol GripEfficiency40~60 pcs/minClutch AdjustabilityNon-AdjustableVariable SpeedVariable Speed Not IncludedOverall Length7.3 inTorque80 in·lbTool Weight2.2 lbNoise80 dB(A)Advantages 1. More stable power output, faster torque response, and reliable overload protection (natural stall without damaging components);2. Higher durability and lower maintenance costs (simpler batch structure, fewer electronic components; only regular lubrication required);3. Better safety, suitable for harsh environments (no risk of electric shock/sparks; very suitable for humid, dusty or explosive areas);4. It can operate continuously without the need for electric drive (relying on a stable supply of compressed air).Machine structure diagram Parameter description of hopperParameter description:1. D205 replenishment bin setting quantity: This code is used to set the quantity for automatic replenishment; As shown in the above figure, the value is 300. After locking the 300th screw, the replenishment bin will automatically replenish the material.2. D213 replenishment bin direct vibration time: This code sets the duration of direct vibration after the replenishment bin starts, and adjusts it according to the on-site situation.3. D214 replenishment bin continued vibration time: Set the duration of direct vibration of the replenishment bin to the duration of continued vibration, and adjust it according to the on-site situation.4. D215 Delay Start Time: This code sets the start delay time (the time from locking one screw until the next screw is blown out).5. All parameters in the chart are set based on an 8-meter-long trachea.6. The air pressure of the feeder is maintained at 0.6~0.7MPa.Note: If there are screws that need to be replaced, press down on the foot pedal to lock it again, and press down on the foot pedal again to return to normal use.Parameter adjustment operation processParameter adjustment is based on the text screen:1. In main mode, press the ∨ key for manual blowing, press the UP key for manual material sorting, and long press the DOWN key for 5 seconds to reset the count;2. Press and hold the SET key for 3 seconds to enter the input parameter mode. The left indicator light will turn on, and the upper digital tube will flash to display the code (such as D200). The lower digital tube will display the default value; The SET ∧ and ∨ keys adjust the code up and down sequence, while the UP and DOWN keys adjust the addition and subtraction of the default value (set value);3. Return process: Press and hold the SET button for 3 seconds to return to the main mode, and the upper digital display will show the count.Please note that all parameters of the machine have been set before delivery, please do not change the parameters at will.Assembly before operation1) Connect the ground wire2) Connect the power supply wire3) Connect ring sensor, make the sensor through the screw connection cableApplication scope1. Applicable screw range: possible up to M1.4-M8, the length of the screw should be more than 1.2 times the diameter of the screw head2. Applicable screw head range: cross slot, triangular home, trox, hex slot, H head, etc.3. Screw surface treatment: electroplated nickel, color zinc plating, white zinc plating, and copper plating, etc.4. Screw material: iron, copper, stainless steel, etc. 5. Screw material of the product to be tightened: plastic, iron, aluminum, etc.Applicable industriesGas batch is suitable for furniture assembly, automotive workshops, motor casing tightening, etc;FQA1,Why choose a pneumatic screwdriver?--The pneumatic batch is superior to the electric batch of the same level in terms of power stability, durability, safety, and operational comfort2,What are the feeding types of robot screw transmission systems?--We use vibrators to classify screws based on their type and size.--Firstly, we use screw holders for picking and placing.--Another method is to use blowing air directly to feed the screwdriver.3,How to apply screws to products?--We mainly have two ways to tighten the product, one is magnetic iron screws, and the other is all materials of vacuum, including iron, copper, and stainless steel screws.4,What kind of screws are suitable for hair dryer machines?--M1.4~M4 screws are suitable for air and material supply of screw driven machines.--The screw length must be less than 16mm. If it exceeds, a customized feeder is required. --For air blowing feeding, the length of the screw must exceed 1.2 times the diameter to prevent the screw from flipping inside the feeding tube.5. What kind of screws are suitable for screw rack machines?--M0.8~M4 screws are suitable for magnetic vacuum feeding in screw driven machines.--Machine screws, self tapping screws, etc.6,What electric screwdriver does this machine use?--Currently, we are using Sioux's electric screwdriver.7,What is the depth range of the threaded holes on the product?--The range is about 20mm, depending on the customer's product, it must be a magnetic screw type.8,What are the common problems during the fastening process?--During the entire process, five common issues may arise, such as misaligned entry, broken screws, damaged threads, missing parts, and floating screws.9,Does this machine have a warranty period?--This machine has a one-year warranty, excluding vulnerable parts.10,How is the after-sales service?--We provide remote video and 24-hour phone calls, and you can also access our company. On site service will be charged accordingly.11.,Can I be your distributor?--Yes, we are open to any company that wants to become our distributor, but in some areas, we already have our own agents.12,What is the delivery time?--EXW,FOB,DAP,FCA. The delivery cycle is 20 working days.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...