IPDB › China Industry › Industrial Equipment & Components
China, Chinese Plastic Clear PVC PP Pph UPVC CPVC Filter/Flow Meter/Sight Glass/Level Meter/Wafer Check Valve/ Y Strainer DIN JIS ANSI 20mm 110mm Pn10 Cl150 Socket/Flange ISO1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Valve PartsValve StrainerPlastic StrainerY Strainer
NINGBO RMI PLASTIC CO., LTD.
Preview:
Product Description Product Name: Plastic Clear PVC PP Pph UPVC CPVC Filter/Flow Meter/Sight Glass/Level Meter/Wafer Check Valve/ Y Strainer DIN JIS ANSI 20mm 110mm Pn10 Cl150 Socket/Flange ISOPA163 is a Y type strainer, transparent PVC is convenient to observe the medium, socket end and flange end for optional.Brief introduction:Y-type filter is an indispensable filter device for the pipe system of conveying medium. Y-type filter is usually installed at the inlet end of the pressure relief valve, pressure relief valve, fixed water level valve or other equipment to remove impurities in the medium to protect the normal use of valves and equipment. The Y-type filter has the characteristics of advanced structure, small resistance and convenient sewage discharge. The applicable medium of Y-type filter can be water, oil and gas. The general access water network is 18~30 orders, the ventilation network is 10~100 orders, and the access oil network is 100~480 orders. Basket filter mainly consists of receiver, supervisor, blue filter, flange, flange cover and fasteners. When the liquid enters the filter blue through the supervisor, the solid impurity particles are blocked in the filter blue, and the clean fluid is discharged through the filter blue by the filter outlet.Basic specificationSize:DN15~DN100 (1/2 inch ~ 4 inch)Connection:FLange, SocketBody Material:PVC-UScreen Material:PP;Stainless steelDesign pressure:1.0Mpa(PN10 bar)Feature of valveTransparent PVC body is convenient to observe the medium. Screen can be taken out and clean. Union design is convenient to install and replace the strainer. Suitable for horizontal and vertical installation. Stainless steel screen is optional.Brief introduction:The rotor flowmeter is to measure the fluid flow rate according to the principle of throttling flow, but it changes the flow area of the fluid to keep the differential pressure up and down the rotor constant, so it is also called the variable flow area constant differential pressure flowmeter, also known as the float flowmeter.Basic specificationSize: DN15~DN150 (1/2 inch ~ 6 inch)Connection: Flange, SocketBody Material: AS, ABS, PVCFloater material: ABS C/W steelMeasuring range: 5-50 l/h ~ 25-200 m3/hAccuracy: 4%Design pressure: 1.0Mpa (PN10 bar)Feature of flow meterAll the parts that touch medium are made by plastic and stainless steel. Measureing range is widely. Union design is convenient to install and replace. Transparent body is convenient to observe the medium, and diagnosis problem. Suitable for vertical installation only Dimension(Unit:mm)Brief introduction:PVC Sight Glass Flange End ANSI CL150 is made by glass body with PVC flange, the main function of sight glass is to observe the medium inside the pipe. PVC sight glass size from 1/2" to 300" with flange connection fit standard ANSI CL150, JIS 10K and DIN PN10. PVC sight glass is suitable for water, waste water, acids, ect. plastic sight glass can be used without pressure only.Basic speci?cationSize: DN15~DN300 (1/2 inch ~ 12 inch)Flange connection: DIN PN10; ANSI CL150; JIS 10KFlange Material: PVC-U; PVC-C; PVDF; PP-GF; PP-HGlass Material: Borosilicate GlassSeal material: EPDM; FPMDesign pressure: 0.15Mpa (PN1.5 bar)Feature of Sight GlassThe parts that will touch medium is made from corrosive resist material. Steel bolt support the glass body, make the sight glass stronger. Rubber seals to protect medium leak to atmosphere. Suitable for horizontal and vertical installation. Brief introduction:PVC Water Level Indicator is made by PVC body with glass tube or plastic transparent tube. it is generally used for measuring the tank liquid level especially the corrosive liquid. the UPVC level meter is by flange connection with standards fit for DIN, ANSI and JIS. This level meter can be open or closed controlled by wheel, Plastic Level Meter is convenient to replace the scale and tubes.Basic speci?cationSize: DN15~DN50 (1/2 inch ~ 2 inch)Flange connection: DIN PN10; ANSI CL150; JIS 10KBody Material: PVC; UPVCDiaphragm Material: EPDMFeature of level indicatorDiaphragm type, convenient for installation and replacement of tube and scalePTFE seals to protect medium from leaking to atmosphere.Brief introduction:Wafer Check Valve is a single piece check valve, wafer connection as per flange standard DIN, pressure rate PN10. PVC wafer check valve is a swing type check valve, body and disc made by PVC and seal by EPDM o ring. Check valve is an automatic valve used to open when the pipeline system medium is downstream and close when the reverse current. The main function is to prevent the backflow of the medium, pump and drive mechanical reversal, prevent the water strike wave generated when the pump and drive motor suddenly stop running, and reduce the damage to the pipeline system.PVC check valve wafer type is light in weight, easy installation, convenient maintenance, it is suitable for water system, especially in swimming pool, water treatment, irrigation, finish farm, etc. RMI PLASTIC offer PVC Wafer Check Valve with the specifications as follows:Basic speci?cationSize: DN80~DN300 (3 inch ~ 12 inch)Connection as per: DIN PN10; ANSI CL150; JIS 10KBody Material: PVC-USeal material: EPDMDesign pressure: 1.0Mpa(PN10 bar)Feature of valveAll the parts that will touch medium is made from thermo plastic and rubber Suitable for horizontal installation Simple structure is easy for installation and replace. Flange assembled type by socket connection is optional
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...