IPDB › China Industry › Instruments & Meters
China, Chinese Diameter Master 30mm and Measuring Head for Air Gage Digital Micrometer1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Weighing Measuring ApparatusGaugeAir GagingThread Plug Gauge
Dongguan SYS Industrial Co., Ltd.
Preview:
Product Description Air MicrometerEasy to UseHigh PrecisionColumn Model Air MicrometerMuti-Channel Digital Air MicrometerMeasuring HeadMasterSPC StationCustomized Plug/Ring Gauge Whta Air Micrometer Work?After clean air is produced with a compressor and filtered, it is blown out nozzle with its pressure kept constant by a regulator.When the clearance between the nozzle and the work to be measured changes, the amount of air being blown out the nozzle also changes, causing the height of a float to change.The movement in position of the float can determine the actual dimensions of the piece of work.There is an Electronic Micrometer similar to the above-mentioned relative measuring instrument.It measures dimensions with a contracting type gauge head(detector).This system that electrically magnifies the mechanical and very little variation enables precise measurement with prompt response, differing from an Air Micrometer.Application of Air MicrometerIt's used in every aspect of industry including consumer electronics 3C, audio & visual devices, automotive and communication devices are becoming more and more microscopic etc.Air Micrometer can be used not only to measure dimensions, but also for complicated profile measuring, automatic measuring, automatic sorting and etc., making them practical over a wide variety of uses. The measuring head can be standardized according to measuring factors and also by order-made designs to meet various measuring requirement.Type of Air MicrometerWe three basic models-the column model (AM-F series), Multi Channel Digital model (AM-D/AM-E series), and SPC model (AM-P series)WHY USE AIR micrometer and what could be measure?Measurable items including inner diameter, outer diameter, slot width, distance between two holes, depth, thickness, roundness, taper, coaxiality, straightness, flatness, parallelism, perpendicularity, ventilation and sealability.1)With high quality and superior stability, it is easy to operate.2)Non-contact measurement, the work-piece to be measured is not corrupted.3)Measured by air blow, an accurate measured value can be obtained without being affected by oil or dusts.4)Many kinds of measuring heads are available, for a wide range of measuring purposes.5)A unique taper tube keeps the float from sticking to the upper area. Furthermore it is easy to remove and fabricate (column type).6)Because of column type, it can easily be set up to measure multiple measuring.7)The back pressure type has superior stability of measured value in measurement against change of air pressure.8)In addition to the basic functions, other automatic measuring functions such as data output are installed.COLUMN AIR MICROMETER (AM-Fseries)The column-type air micrometer is a measuring instrument with an easy to see three color bargraoh display. The combination with an air/electric A/E converter provides this compact instrument with an automatic mastering function.1) Compact and easy use for work shop2) An eight digit alphanumeric display indicates the measured value+set items and other types of information.3) Control keys are used to automatically calibrate the instrument with themaximum and minimum masters.4) Operation is simple since master settings can be configured via the operating keys. 5) Pass/Fail assessments can be easily made via the three-colorLED bar graph.Specification:ItemSpecificationProduct NameColumn Air MicrometerModelAM-10FOrder No171-001Input1 air channel Standard Nozzle Port Diameter/mmφ2mmStability≤±1μm/4hMeasuring Range/μm±5/ ±10/ ±25/ ±50 (Four level)Digital Resolution/μm0.1(±5) / 0.1 (±10) / 0.5 (±25) / 0.5 (±50)Bargraph Resolution/μm0.1(±5) / 0.2 (±10) / 1 (±25) / 2 (±50) Value Error0.2(±5) / 0.3 (±10) / 1 (±25) / 2 (±50)Measuring Time seconds0.8SDisplayBargraph: 0-99 segment/3 color with Green Red Orange for OK -NG +NGCommunication PortRS232C/RS485LanguageChinese/EnglishPower Requirement100 to 264V, 50/60 Hz Single PhaseSource Pressure0.4MP to 0.8MPOperating Temperature0 to 45°CDimensionsWxHxL(50mm × 480mm × 200 mm)Weight3.5 kgMulti-channel AIR MICROMETER (Model: AM-D series /AM-E series)AM-D series air mirometer adopts the embedded single-chip computer technology and designed digital product. It is a newer product of traditional air mirometer. Data acquisition and digital processing of the analog signal quantity, can directly display the measured dimension. The absolute measurement value of the measured dimension or the change relative to the nominal dimension value is the relative measurement value. According to the pre-set dimensional tolerance limit of the workpiece, it indicates whether the measured workpiece is qualified or not. It can be used as a single unit or combined with multiple units to save operation space.Feature:1) High brightness LCD screen display for easy operation2) Multi-language menu operation (supports custom language)3) Easy Operation with accuracy 0.1μm4) Can be equipped with kinds of measuring head and master5)Special case material for high stability, best for work shop.6)Ten sets of programs can be set up to measure multiple specifications7)Data management capabilities-SPCAdvantage:1. Channels: Standard 6 channels AM-Dseries; standard 2 channels of AM-Eseries (support the expansion of multi-channel up to 12 channel)2.Measuring Function: such as measuring the inner diameter, outer diameter, slot width, depth, length etc;3. Man-machine friendly: adaptive according to the operator's proficiency;4. The maximum range: ± 100um (can be customized)5. Data analysis: online SPC basic data storage and analysis processing (can be customized CP\CPK function);6. Data storage: 10-300,000 pieces of test data can be stored (AM-D series hard disk can be expanded);7. Data output: test results through RS232 output, TCP/IP output, relay output;8.Overrun alarm: automatic determination and red and green dual-color indication and alarm when the test results are saved;9. Display accuracy: the number of decimal places of the test results can be set freely;10.Power supply voltage: AC100-220V ~ 50/60HZ power access;11.Gas source requirements: 0.4 ~ 0.6Mpa pure and dry gas source access (φ8 gas pipe);12.The air micrometer systemmust be matched with a special electrical device system to normal use.SpecificationItemSpecificationProduct NameMulti Air MicrometerModelAM-20EAM-D SeriesOrder No171-002171-003Input2ch( max 4ch)2ch(max 12ch)Standard Nozzle Port Diameter/mmφ8mmφ8mmWorking MethodAuto-Measuring/By hand measuring/ By foot SwitchMeasuring Storage10-300,000 10-300,000 Support expandMeasuring Range/μm20/ 50/100/ 200/ 1000Digital Resolution/μm0.1 / 0.2/ 0.5/ 1.0Stablityless 0.4μmDate Analysisonline SPC basic data storage and analysis processing (can be customized CP\CPK function);DisplayLarge touch screen LCDCommunication PortRS232C/RS485RS232C/RS485LanguageChinese/EnglishChinese/English /Customzied (optional)Power Requirement100 to 264V, 50/60 Hz Single PhaseSource Pressure0.4MP to 0.7MP0.4MP to 0.6MPOperating EnvironmentTempertaure:0 to 45°C/ Humidity 85%No icing, no condensationDimensionsWxHxL(280mm × 200mm × 200 mm)WxHxL(260mm × 280mm × 200 mm)Weight4kg5kgIntegrated Inspection SPC STATION?Application: widely used inautomobile, motorcycle, air conditioning compressor, bearing, spinning machine, industry, aerospace, etc.; ?Measurement accuracy: can reach 0.1μm.Measuring range: can measure the length dimension and form dimension of special shape parts. ?Operation process: intelligent prompt, easy operation.?Measurement data: Intelligent storage, SPC intelligent database analysis.?Quality control: visualization of over-variance alarm, Improve work efficiency.?Customization: various types of inspection workstations can be customized according to customer requirements.About USSYS in industial Co.Ltd committed to service industry field and specialized in customzied pruducts.Up to now we have products include Air Micrometer,Gauge blocks, Gages,Cutting Tools,measuring instrument and kinds of industry tools.Our 85% business clients for customized order according to clients requirement.We believes high quality products come from a complete quality managements system with advanced processing and measurement methods and has adopted CMC and ISO9001 quality management systems.SYS is Specialized our products Young age from 25 year to 35 years old Satisfy clients demand is our attitudeSo we call SYS
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...