IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese Aerospace Zirconium Rod 9.5mm 10mm 10.5mm 11mm 11.5mm 12mm Lightweight High Strength for Aircraft Parts1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Non ferrous Metal ProductsZirconiumZirconium RodZirconium Bar
Shandong Zehao Metal Materials Co., Ltd.
Preview:
Product Description Product Descriptionnamezirconium bar rodworking temperature300~400 degreeblong tonon-ferrous metalsbe used forFlash, firework materialTypes of zirconium alloys:There are two series of zirconium-based alloys produced on an industrial scale: zirconium tin and zirconium. The former isrepresented by Zr-2 alloy, and the latter is represented by Zr-2.5Nb alloy. The composition and properties of zirconium and three zirconium alloys are shown in the table. The principle of alloying element selection of zirconium is: one can not significantly increase the thermal neutron absorption cross section of zirconium; the second is to improve the corrosion resistance and strength of zirconium without excessively impairing the process performance. In the zirconium-tin alloy, the comprehensive addition of tin, iron, chromium and nickel (Zr-2 alloy) can improve the strength and corrosion resistance of the material, the thermal conductivity of the corrosion-resistant film, and reduce the sensitivity of the surface state to corrosion; Zr-4 alloy does not contain nickel, and the iron content is appropriately increased. The corrosion absorption of this alloy is only about half of that of Zr-2 alloy. Usually Zr-2 alloy is used in boiling water reactors and Zr-4 alloy is used in pressurized water reactors. In the zirconium-lanthanum alloy, the corrosion resistance of the alloy is best when the amount of niobium added reaches the solid solution limit of α-Zr at the use temperature. The niobium content in the Zr-1Nb and Zr-2.5Nb alloys is higher than the solid solution limit at the use temperature. The excess enthalpy is present in the α-Zr in a supersaturated state, which is detrimental to the corrosion resistance of the alloy, but is much better in the form of the second phase β-Nb. Most of the metal impurity elements in zirconium and zirconium alloys are required to be below 50 ppm, and elements with large thermal neutron absorption cross sections (such as boron and cadmium) should not exceed 0.5 ppm; nitrogen with severe damage to corrosion resistance should not exceed 80 ppm; The strengthening effect, the content of which is generally 800 to 1600 ppm depending on the strength requirement..Packaging & Shippingvacuum packingEvery pcs of the all targets will be in vacuum packing septartely first to avoid oxidation,contaminated,contact touch and so on.Non fumigation wooden box packing outsideVacuum packing sputter will be packed in cartons with fixed supportCompany ProfileShandong Zehao Metal Materials Co., Ltd. is an enterprise engaged in the research, smelting and processing of titanium and its alloys, zirconium and its alloys, tungsten, molybdenum, monel, Inconel, chromium nickel alloys, nickel and other high-temperature alloys and corrosion-resistant alloys. The products cover plates, strips, profiles, bars, wires, pipes, pipe fittings, forged flanges, etc. The factory covers an area of 120000 square meters. Now it has a series of production equipment, including 2t vacuum induction furnace imported from the United States, 8t and 12t vacuum consumable arc furnaces made in Germany, 2800mm four high reversing mill, vacuum annealing furnace, etc. It can produce 2.6m * 16m plates, and the maximum length of a single pipe can reach 15m. At the same time, it has more than 100 sets of various testing instruments, including American NDT system, spectrum analyzer, carbon and sulfur analyzer, universal testing machine, ultrasonic flaw detection system, fatigue testing machine, etc. The company has more than ten years of export experience, and its products are exported to the United States, Britain, Germany, Russia, France, Brazil, Japan, South Korea, India, Vietnam, Australia, the Philippines, Zambia, Indonesia and other countries all year round Looking forward to cooperate with the new and old customers sincerely. Our Advantages FAQQ1: Can I order a sample quantity ?A1: Yes, we have no MOQ.Q2: Can I add my logo on the boxes/cartons?A2: Yes,OEM and ODM are available from us.Q3: What are the benefits of being a distributor ?A3: Special discount Marketing protection.Q4: How does your factory control the quality of your products?A4: 100% self-inspection before packing. Quality is the life of our factory, first, each raw materials, come to our factory, we will test it first, if qualified, we will process the manufacturing with this raw materials, if not, we will return it to our supplier, and after each manufacturing step, we will test it, and then all the manufacturing process finished, we will do the final test before the commodities left our factory.Q5: Can we mix items in one 20ft container?A5: Yes.Q6: Can I have a visit to your factory before the order?A6: Sure,welcome your visit of factory.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...