IPDB › China Industry › Instruments & Meters
China, Chinese Suin SA62c10 100MHz 1gsa/S Digital Storage Oscilloscope1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Electronic InstrumentOscilloscopeDigital OscilloscopeDigital Storage Oscilloscope
Shijiazhuang Suin Instruments Co., Ltd.
Preview:
Product Description Electronic Measuring Digital Desktop Storage Oscilloscope * 2 channel, 100MHz/150MHz bandwidth.* 1GSa/s real time sample rate.* 8M memory depth.* 8 bit vertical resolution.* Vertical scale from 2mV/div to 10V/div.* Large (7.0-inch) color display, WVGA (800x480).* Multiple automatic measurements. * Four math functions, including FFT standard.* Trigger mode: edge, pulse width, video, slop, timeout, window, pattern, interval, runt.* Serial decode/trigger options for: UART, LIN, CAN, IIC, SPI. * Each analog channel with an individual 3 digits digital voltmeter (DVM) and 5 digits frequency counter.* 32 built-in measurements and a measurement statistics display.* Built-in 1 channel waveform generator with: sine, square, ramp, exponential rise, noise, DC, arbitrary (available for SA62D10 and SA62D15 only).* USB host and device connectivity, standard.* Supports SCPI remote command control.Specification Model SA62D15 SA62D10SA62C15SA62C10OverviewOscilloscope2 analog channelsWaveform GeneratorStandardStandardN/AN/ASerial Protocol AnalysisUART, LIN, CAN, IIC, SPIIntegrated Digital Voltmeter (DVM)StandardExternal Trigger1OSCILLOSCOPEInput Analog Channel2Input Coupling AC, DC, GND Input Impedance/Capacitance 1MΩ±1% / 20pF±3pF (DC coupling)Standard Probe Attenuation 1X, 10X Supported Probe Attenuation Factor 1X, 10X, 100X, 1000X Overvoltage CategoryCATII 300VMaximum Input Voltage 300VRMS (10×) VerticalBandwidth 150MHz 100MHz 150MHz 100MHz Rise Time at BNC (typical) ≤ 2.4ns ≤3.5ns ≤ 2.4ns ≤ 3.5ns Vertical Resolution 8-bit resolution, all channels sampled simultaneously Input Sensitivity Range2mV/div to 10V/div Offset Range 2mV/div to 200mV/div, ±1V500mV/div to 10V/div, ±50VBandwidth Limits 20MHz (selectable)Invert SignalSelectableLow Frequency Response (-3db) ≤10Hz at BNC DC Gain Accuracy ±3% full scale for Normal or Average acquisition mode, 10V/div to 10mV/div;±4% full scale for Normal or Average acquisition mode, 5mV/div to 2mV/div DC Offset Accuracy ±0.1div ± 2mV ± 1% offset settingSkew2nsNote: when using a 1X probe, bandwidth reduce to 6MHzHorizontalTime Base Range 2ns/div to 100s/div (in 1-2-5 sequence)Sample Rate and Delay Time Accuracy ±50ppm Delta Time Measurement Accuracy (Full Bandwidth) Single-shot, Normal mode: ± (1 sample interval +100ppm × reading + 0.6ns)>16 averages: ± (1 sample interval + 100ppm × reading + 0.4ns)Sample interval = s/div ÷ 200 Acquisition Max. Sample Rate 1GSa/s for half channels500MSa/s for all channelsMemory DepthMax. 8M for half channelsMax. 4M for all channelsWaveform Interpolation (sin x)/x Waveform Update Rate (Typical)Up to 2,000 waveform per second each channel (Normal acquisition mode, no measurement)Acquisition ModeNormal, Peak Detect, Average, HR (High Resolution)Time ModeYT (default mode), XY (volts vs. volts display), Roll (displays the waveform moving across the screen from right to left)AutosetFinds and displays all active channels and external trigger. And automatically configures the best display of the input signals on these channels.Single SequenceAcquisition ModeAcquisition Stop TimeNormal, Peak DetectUpon single acquisition on all channels simultaneously Average After N acquisitions on all channels simultaneously, N can be set to 4, 8, 16, 32, 64 or 128 TriggerTrigger Modes Auto, Normal, Force (front panel key that forces a trigger) Trigger Source CH1, CH2, EXT, AC LineTrigger Holdoff Range 20ns to 10sTrigger Level Range Internal: ±5 divisions from center screenExternal: 3.3V (CMOS)Trigger Level Accuracy ( typical) Internal: 0.2div × volts/div within ± 4 divisions from center screenTrigger Sensitivity±0.2 divSet Level to 50% (typical) Operates with input signals ≥50Hz Trigger Types Edge, Pulse width, Video, Slope, Over time, Window, Pattern, Interval, Under Amp EdgeTrigger on a rising, falling, or either edge of any source Pulse WidthTrigger on a pulse of a selected channel with a time duration that is 'less than a value,' 'greater than a value' , 'equal to a value' or 'not equal to a value'Range: 8ns to 10s VideoTrigger on scan lines or individual lines; odd/even or all fields from the composite video; or broadcast standards (PAL and NTSC) SlopeTrigger on rising or falling slope of the specified time. This trigger mode is applicable to ramp and triangle waveforms.Time setting range: 8ns to 10sOvertimeTrigger when the time interval is greater than the pre-set timeout value.WindowTrigger when the input signal passes through the high trigger level or the low trigger level.PatternTrigger when a specified pattern on any combination inputs is entered.IntervalTrigger on rising or falling edge when the time between the edges is within the specified time. You can use this trigger to find missing or mistimed edges, or changes in signal frequency. Under Amp Trigger pulses that pass through one trigger level but fail to pass through another trigger level.UART Trigger on start frame position, stop frame position, specified data, parity error or communication error. LIN Trigger on LIN (Local Interconnect Network) interval filed, sync field, ID field, sync code error, or specified identifier, frame ID and data. CAN Trigger on the start of frame bit, remote frame ID, data frame ID, remote or data frame ID, data frame ID and data, error frame, all errors, acknowledge error, and overload frame of the CAN (controller area network) signal. SPI Trigger on SPI (Serial Peripheral Interface) data pattern during a specific framing period. IICTrigger at a start/stop bit or specified address and/or data values. Also, trigger on missing acknowledge, restart. Measurements CursorsVoltage difference between cursors: △VTime difference between cursors: △TReciprocal of △T in Hertz (1/ΔT) Auto Measurements Voltage: Peak to peak, Average, Maximum, Minimum, Vtop, Vmid, Vbase, Vamp, RMS, R-Overshoot, F-Preshoot, Preiod RMS, Preiod Average, F-Overshoot, R-PreshootTime: Frequency, Period, Rise time, Fall Time, + Width, - Width, +Duty, -Duty, BWidth, FRR, FFF, FRF, FFR, LRR, LRF, LFR, LFF Waveform Math Arithmetic+, -, x , ÷, FFTFFT Window types: Hanning, Hamming, Flattop, Rectangular, Bartlett, BlackmanSample point: 1024DVM (DIGITAL VOLTMETER)FunctionsDC RMS, AC RMS, DC Data SourceCH1, CH2Resolution3 digits FREQUENCY COUNTER FunctionsFrequencyData SourceCH1, CH2Resolution5 digits BUILT-IN ARBITRARY/FUNCTION GENERATOR (only available for SA62D15 and SA62D10)WaveGen Out1CH Front-panel BNC connectorWaveformsSine, square, ramp, exponential rise (EXP), noise, DC, arbitrary.ModulationModulation TypeAMModulation Frequency: 1Hz to 75MHzDepth: 0 to 120%FMModulation Frequency: 1Hz to 75MHzDeviation: 0.1Hz to carrier frequencyCarrier Wave Sine, rampModulationSine, square, rampBurstTypesN Cycle, InfiniteCount1 to 1024Trigger SourceManualFrequencySine: 0.1Hz to 25MHzSquare: 0.1Hz to 10MHzRamp: 0.1Hz to 1MHzExponential Rise: 0.1Hz to 5MHz Arbitrary: 1uHz~75MHz Noise Bandwidth>25MHzOutput Impedance50 Ω + 1% high impedanceAmplitude5mV to 3.5Vpp (50Ω)10mV to 7Vpp(High impedance)DAC2K~200MHz adjustableFrequency Resolution1uHzWaveform Depth4KSaVertical Resolution12 bitFrequency Accuracy100ppm (frequency <10KHz)50ppm (frequency >10KHz)Amplitude Accuracy ±3dB DisplayDisplay Type7 inch TFT (diagonal liquid crystal) Display Resolution 800 horizontal by 480 vertical pixels ConnectivityStandard PortsUSB 2.0 (host and device)Probe Compensator Output Output Voltage ( typical) About 5V into ≥1MΩ load Frequency (typical) 1kHz ± 1% Power Supply Supply Voltage 100-120VACRMS(±10%), 45Hz to 440Hz120-240VACRMS(±10%), 45Hz to 66HzPower Consumption <15W Fuse T2A 250VAC 4x8Environmental Temperature Operating: 32oF to 122oF (0oC to 50oC);Storage: -40oF to 159.8oF (-40oC to +71oC) Cooling Method Convection Humidity +104oF or below (+40oC or below): ≤90% relative humidity;106oF to 122oF (+41oC to 50oC): ≤60% relative humidity Altitude Operating: Below 3,000m (10,000 feet)Mechanical Dimension318 x 110 x 150mm (L x W x H)Weight 1.90KG Compay Profile Shijiazhuang SUIN Instruments Co., Ltd is a high-tech company and concentrates on R&D, production, test, sales and service of test& measurement instruments, electrical products, application software, etc. We have reliable quality management system and quality guarantee system and have acquired ISO9001: 2000 International QualityCertification and most of our products have got approval CE and RoHS certification.FAQ 1. who are we? We are based in Hebei, China, start from 1990,sell to Eastern Europe(50.00%),Western Europe(22.00%),South America(12.00%),Southeast Asia(6.00%),South Asia(5.00%),Eastern Asia(3.00%),North America(2.00%). There are total about 101-200 people in our office. 2. How can you guarantee quality? We have reliable quality management system and quality guarantee system,and before shipment,we will arrange reinspect the instrument. 3.what can you buy from us? You can buy power quality analyzer,signal generator,frequency counter,DC power supply,millivolt meter and many other meters from us. 4. what certificates do you have? We have acquired ISO9001: 2000 International Quality Certification and most of our products have got approval CE and RoHS certification. 5. what services can you provide? OEM/ODM service 18 months warranty sample service company and factory visit We do our best to provide test instruments with higher performance and lower price and meet your satisfaction.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...