IPDB › China Industry › Industrial Equipment & Components
China, Chinese High Temperature Ball Valve Q11m Stainless Steel Full Port Valve1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
ValvePlunger ValveHigh Temperature Ball ValveQ11m
Keke Group Co., Ltd.
Preview:
Product Description Product DescriptionWear resistance mechanismWhen the plunger valve is cosed, the siem inserts the punger into the lower seal ring as if the bole was insered inio the boe, No maler how much force you use to tum thehandwheel, it wl not afect the sealng force between the plunger and the sealng ring. They silmainlain the degree of preightening duning asemby. That is to saly, ther woringsuaces are notsubiec o extemal aciors.inuences, When the plunger vave is opened, he pluner moves only siowly in the sealing, and the conlacl surace of he plunger and theseal ring hardly wears, This feature is not available in ordinary shut-off valvesDon't care about impurities in the fluidFine impurities in the fuid do not harm the plunger valve. When the valve is closed, the plunger enters the seal ring and sweeps out the aerosol in the liquid.Key in the seal ringThe sealing ring is the key component of a plunger valve. It is made of a composite material that is high-strength, high-temperature resistant, corrosion-resistant, wear-resistant, non-toxic, and capable of withstanding long-term high pressure and high temperature without losing elasticity while maintaining stable dimensions. The main components include PTFE (polytetrafluoroethylene), graphite, and highly elastic rubber. The sealing ring is a high-tech product that can still provide excellent sealing performance even after millions of reciprocating movements. The various specifications of sealing rings we typically supply can be continuously used under conditions ranging from -10°C to 300°C without failurKey points for the new plunger valve to be activatedWhen a new plunger valve is put into operation, the nuts on the valve cover should be tightened once more, one by one. This operation should be carried out within one hour after the valve reaches its operating temperature, and the valve should be in the closed position during this process.Leakagetreatment(leakageon the sealing surface and the same treatment method for the upper bonnet)If leakage occurs after the plunger valve has been in service for a long time, close the valve completely, then tighten the nuts on the valve cover diagonally in a crisscross pattern until the leakage stops. Caution: Never tighten the nuts all the way down in a single attempt.Method of updating the plunger valveWhen the nuts on the valve cover have been fully tightened and leakage still cannot be eliminated, it is necessary to service the plunger valve. In this case, "servicing" does not require removing the leaking plunger valve body from the pipeline; instead, simply replace the old sealing rings with new ones. Only a few simple tools, such as wrenches and screwdrivers, are needed. The specific steps are as follows:Shut off the upstream fluid so that no fluid passes through the valve to be serviced (hereinafter referred to as the valve), and fully open the valve.Remove the nuts and rotate the handwheel in the closing direction to bring out the valve cover.When the valve cover bolt holes are disengaged from the studs, rotate the valve cover around the valve stem to an angle so that the bottom face of the valve cover flange faces the heads of the studs.Rotate the handwheel in the opposite direction, allowing the valve cover to rest on the studs, and continue turning the handwheel until the plunger pulls out the upper sealing ring.Use a screwdriver to remove the upper sealing ring, the metal spacer, and the lower sealing ring.Replace the old sealing rings with new ones, inserting them into the valve body in the order of lower sealing ring → metal spacer → upper sealing ring.After cleaning the inner surface of the sealing rings and the outer surface of the plunger, put the plunger together with the valve cover, stem, etc., into position, and tighten the nuts to press the valve cover face onto the upper sealing ring.Rotate the handwheel in the closing direction to ensure the plunger, along with the valve cover and stem, is in place, and tighten the nuts, pressing the valve cover against the upper sealing ring.Follow the guidelines in the "Key Points for New Plunger Start-Up" section.At this point, the replacement process of the sealing rings is complete, and the plunger valve is restored to like-new condition - achieving a "new valve" with minimal time and cost. Structure and characteristicsThis valve is developed by adopting the structural design of foreign high temperature ball valves and adapting it to domestic conditions. Its connection dimensions conform to national standards. In particular, the sealing rings produced by our factory offer high strength, excellent wear resistance, and strong elasticity, ensuring reliable sealing and long service life. They are widely used as on off devices for fluid media in pipelines such as petroleum, chemical, and steam systems. During operation, the valve must be either fully open or fully closed-partial opening for flow regulation is not permitted, as high flow velocities can damage the sealing surfaces.Main Thread Size And Connection Size Of Internal Thread Ball Valve Q11M1.6QDN (mm)GL (mm)L1 (mm)L2 (mm)S (mm)D (mm)H (mm)D0 (mm)151/2″904514324882125203/4″1005016365585125251″11558184662901253211/4″130662055801202504011/2″15077226190145250502″180912475112150300Performance SpecificationProduct numberDN (mm) Nominal diameterNominal pressure (MPa)Applicable mediumApplicable temperature (°C)Body materialValve flap materialAdapt to medium codeQ11M1.6Q12-2516 Water, steam, gas, oil, etc.≤250QT450101Cr18Ni9Ti8202 Q1: How long is the product warranty?A1: Within 24 months, we will provide you with replacement or repair services, except for quality problems caused by human factorsQ2: Do you have any MOQ limit for valve orders?A2: No, the MOQ is 1 unit for sample inspection.Q3: Is there a wholesale discount?A3: Wholesale discounts are available for large-volume orders. Please contact us for discount information.Q4: Does it support customized valve needs?A4: It can be customized. Please confirm the customization details with us.Q5: Are you a trading company or a manufacturer?A5: We are a manufacturer and a factory.Q6: Where is your factory?A6: Keke Group Co., Ltd., headquartered in Wenzhou, Zhejiang Province
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...