IPDB › China Industry › Instruments & Meters
China, Chinese Fluke 376 FC True-RMS Clamp Meter with iFlex 376FC1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Electronic InstrumentClamp MeterFluke 376 FC Clamp MeterTrue-RMS Clamp Meter
BNSENS Co., Ltd.
Preview:
Product DescriptionProduct DescriptionThe Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.Find the cause of difficult problemsThe 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.Measure:? Voltage to 1000 V AC or DC? Resistance to 60 kΩ with continuity detection? Min, max, average, and inrush recording to capture variations automatically? 500 mV DC measurement range to interface with other accessories? 1000 μF capacitance measurement? Work safely and conveniently? The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer you the highest possible protection in a test tool.The included 18-inch or 36-inch iFlex flexible current probe provides easier access to large conductors in tight spaces. The flexible probe:? Expands the measurement range to 2500 A AC? Allows frequency measurement to 500 Hz with body jaw and iFlexFeaturesModel? Connect your meter to your smartphone with Fluke Connect Measurements ? Read the measured values via mobile phone at a safe distance. The instrument assumes all risks, and the staff only need to wear less personal protective equipment.? Record the measurement results directly to the mobile phone and the Cloud.? While collecting intermittent faults, use the recording function of Fluke 376 FC to perform other tasks.? Create reports on site and share them instantly via email, or use ShareLive? video calls for real-time conversations.? The iFlex flexible current probe expands the measurement range of alternating current up to 2500 A; it enables measurements with large-size conductors in narrow spaces (included).? TPAK magnetic strap (included)? The integrated VFD low-pass filter can be used for accurate measurements of drive motors.? Adopting proprietary surge measurement technology, it can filter out noise and accurately capture the starting current of the motor through current protection monitoring.? CAT IV 600 V, CAT III 1000 V safety levels? Three-year warranty? Soft carrying caseModel: Fluke 376 FC Includes:? Fluke 376 FC True-RMS Clamp Meter? 18-inch iFlex? Flexible Current Probe? TPAK magnetic hanging strap? TL75 Test Leads? Two AA batteries (Installed)? Soft carrying case? Coated instruction card? Safety information sheetSpecificationGeneral SpecificationsAC Current via JawRange999.9 AResolution0.1 AAccuracy2% ±5 digits (10 Hz to 100 Hz)2.5% ±5 digits (100-500 Hz)Crest Factor (50 Hz/60 Hz)3 @ 500 A2.5 @ 600 AAdd 2% for C.F. >2AC Current via Flexible Current ProbeRange2500 AResolution0.1 A (≤ 600 A)1 A (≤ 2500 A)Accuracy3% ±5 digits (5 – 500 Hz)Crest Factor (50/60Hz)3.0 at 1100 A2.5 at 1400 A1.42 at 2500 AAdd 2% for C.F. > 2Flexible current probei2500-10 Flexi2500-18 Flexi2500-36 FlexADistance from Optimum0.5 in (12.7 mm)1.4 in (35.6 mm)4.8 in (122.2 mm)Error±0.5 %±0.5 %±0.5 %BDistance from Optimum0.8 in (20.3 mm)2.0 in (50.8 mm)5.3 in (133.6 mm)Error±1.0 %±1.0 %±1.0 %CDistance from Optimum1.4 in (35.6 mm)2.5 in (63.5 mm)5.8 in (147.6 mm)Error±2.0 %±2.0 %±2.0 %Measurement uncertainty assumes centralized primary conductor at optimum position, no external electrical or magnetic field, and within operating temperature range.DC CurrentRange999.9 AResolution0.1 AAccuracy2% ±5 digitsAC VoltageRange1000 VResolution0.1 V (≤600.0 V)1 V (≤1000 V)Accuracy1% ±5 digits (20 Hz to 500 Hz)mV dcmV dcRange500.0 mVResolution0.1 mVAccuracy1% ±5 digitsFrequency via JawRange5.0 Hz to 500.0 HzResolution0.1 HzAccuracy0.5% ±5 digitsTrigger level5 Hz to 10 Hz, ≥10 A10 Hz to 100 Hz, ≥5 A100 Hz to 500 Hz, ≥10 AFrequency via Flexible Current ProbeRange5.0 Hz to 500.0 HzResolution0.1 HzAccuracy0.5% ±5 digitsTrigger level5 Hz to 20 Hz, ≥25 A20 Hz to 100 Hz, ≥20 A100 Hz to 500 Hz, ≥25 AResistanceRange60 kΩResolution0.1 Ω (≤600 Ω)1 Ω (≤6000 Ω)10 Ω (≤60 kΩ)Accuracy1% ±5 digitsCapacitanceRange1000 μFResolution0.1 μF (≤ 100 μF)1 μ F (≤ 1000 μF)Accuracy1% ±4 digitsMechanical SpecificationsMaximum voltage between any terminal and earth ground1000 VBatteries2 AA, NEDA 15A, IEC LR6Operating temperature-10 °C to +50 °CStorage temperature-40 °C to +60 °COperating humidity -non-condensing (< 10°C)≤90% RH (at 10 °C to 30 °C)≤75% RH (at 30 °C to 40 °C)≤45% RH (at 40 °C to 50 °C)Operating altitude2000 mStorage altitude12,000 mSize (L x W x H)249 x 85 x 45 mmWeight395 gJaw opening34 mmFlexible current probe diameter7.5 mmFlexible current probe cable length(head to electronics connector)1.8 mSafetyIEC 61010-1, Pollution Degree 2IEC 61010-2-032: CAT III 1000 V / CAT IV 600 VIEC 61010-2-033:CAT III 1000 V / CAT IV 600 VIP ratingIEC 60529: IP30, non-operatingRadio Frequency Certification FCC IDT68-FBLE IC:6627A-FBLEElectromagnetic Compatibility (EMC)InternationalIEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2CISPR 11: Group 1, Class AGroup 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purpose. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object.Korea (KCC)Class A Equipment (Industrial Broadcasting & Communication Equipment)Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.USA (FCC)47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.Temperature coefficientsAdd 0.1 x specified accuracy for each degree C above 28 °C or below 18 °CCompany Profilehttps://bnsens.en.made-in-china.com/BNSENS (Nanjing) Sensor Technology Co., Ltd. is located in Nanjing, China. It is a high-tech enterprise specializing in the development, manufacturing and trade of sensor products. The company has brought together a group of outstanding technical experts in various fields such as automation, electronics, machinery and computers. All employees of the company have college degrees or above. It adopts the world-class management and operation model and 6 sigma quality system. At present, the company's main products are pressure, liquid level, flow, current, switches, etc. The company's users are all over the country, and some products have been exported to Japan, South Korea and Southeast Asia.Since its inception, the company has been based on the technical accumulation and management standards of American sensor giants. It is composed of senior engineers and managers who have served in multinational companies for many years, and has rapidly developed various pressure sensors, transmitters, liquid level, flow meters, pressure switches, digital meters, current sensors, proximity switches and other products. After years of unremitting efforts, it has become one of the leading suppliers in the domestic automation industry. Our pressure transmitters can achieve an accuracy of more than 3/10,000. The products have been widely used in oil, natural gas, electricity, chemical industry, metallurgy, building materials, food, light industry, environmental protection, aerospace, tap water, municipal and other industries.It is a sensor science and technology innovation company that masters the core technology of MEMS chips. The company has a research and development center in Minnesota, USA. The leader is Dr. Pan Hanjin, a famous scientist in the sensor industry. Dr. Pan Hanjin has been deeply involved in the sensor industry for more than 20 years and is an expert in the sensor industry.The company has a number of ASIC chips independently developed, which are widely used in industrial, automotive, home appliance and other markets.BNSENS (Nanjing) Sensing Technology Co., Ltd. is a strategic partner of Honeywell in China. The two parties proposed a plan of East serving East and jointly developed several sensors specifically for the Chinese market. These sensors will be widely used in intelligent manufacturing, Internet of Things, artificial intelligence, and smart home fields. These sensors include: magnetic sensors, temperature sensors, humidity sensors, force sensors, fire water pressure sensors, equipment vibration sensors, human body status monitoring sensors, motion sensors, etc.History of BNSENS Company:BNSENS is a company focusing on sensors, instruments, and electronic components. We are a young company, founded in 1999, just 25 years old, and we are still growing.1999: The company's first pressure sensor was launched, mainly for the petroleum and petrochemical industries.2002: The company expanded its product line and launched temperature sensors2005: Started producing high-precision pressure sensors for the test and measurement market2006: Became an official authorized agent of Honeywell2009: Introduced the Six Sigma management system, and the product qualification rate was greatly improved2010: Became a supplier of Emerson2011: We started selling SICK sensors2014: Introduced the sensor production line from Germany, developed more industrial control sensors, and cooperated with TSMC2015: Cooperated with Siemens in Vietnam2017: The factory moved to Nanjing High-tech Zone2019: Became a national high-tech enterprise in China2023: We started selling products from Infineon and Rohm2025: We started cooperating with FlukeBNSENS,The Future Starts Here.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...