IPDB › China Industry › Instruments & Meters
China, Chinese Seelong Customizable Slzn2000 6000rpm 0.2f. S Shaft Type Static Torque Sensor1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
SensorTorque SensorShaft Torque SensorLab Testing Equipment
Seelong Intelligent Technology (Luoyang) Co., Ltd.
Preview:
Product Description Seelong Intelligent Self-manufactured SLZN2000 6000rpm 0.2F.S Seelong Customized Shaft Type Static Torque Sensor For Testing Product DescriptionSlzn-2000 dynamic torque sensor is a non-contact high-speed rotation sensor, also known as torque speed sensor, because of its high measurement quality and low linear error, sensor has been in the advantage of torque measurement products. The SLZN-2000 torque sensor adopts a non-contact design and is suitable for long time rotational torque measurement and high speed rotational torque measurement environments due to the absence of wearing parts. The SLZN-2000 torque sensor is a good choice for testing systems on production lines or test stands or on test machines. In addition, We offer three types of torque sensors for dynamic torque and speed measurement. All three sensor models use our unique non-contact differential transformer torque measurement technology, which offers many advantages, not least the absence of electronic rotation during operation. Slzn-2000 can be measured at high speed up to 6000 RPM. Each model has an integrated regulating electronic module that provides torque output and open collector speed output. Our torque sensors are very reliable, providing high overload protection, excellent long-term stability and high noise resistance.Product features1. The power supply and signal transmission are non-contact.2. No bearing, wide range of speed.3. The connection with power shaft and load shaft is rigid connection.4. It is convenient to install and debug. The radial runout of the user's shaft is less than 0.05mm, and the axial movement is less than 0.5mm. The adjusting bolt at the bottom of the sensor can easily adjust the installation clearance.5. This model has two kinds of output with 485 bus and without 485 bus: standard type without 485 port; bus type with 485 port, USB data line of computer and measurement software of upper computer.6. This model of products are dynamic balance before delivery, suitable for high speed.Product characteristics Built in digital measurement signal conditioning unit, through contactless transmission, the data is directly output in standard analog or digital signal modeStrong anti-interference abilityThe rotor rotates in the stator ring, no mechanical bearing is allowed, so there is no wear.0.5 or 0.1 precision level, optional current, voltage or frequency signal outputHigh precision magnetoelectric angle / speed measuring unit, dust and moisture proofParameter identification, setting, measurement and zero balance of sensor are realized through RS-485 interfaceVery small axial size compact flange flange connection designDigital non-contact signal transmission, no bearing, no maintenance, system self-test functionFunction descriptionThe performance and installation dimension of the product are fully compatible with the corresponding sensors of SLZN series, and the user does not need to change too much design to replace the product.Data sampling time can be as fast as 1 ms, and can be set between 1-1000 MS as needed.Using advanced measurement algorithm, the measurement error of data signal can be reduced to ± 1Hz.Through the digital bus interface signal, the measured value of torque and speed is directly transmitted to the computer and other network control equipment.The bus data communication has CRC data verification function, and the reliability of data transmission is high.The measured parameters can be remotely modified by computer and other control equipment, and the parameters can be completely saved after power failure.It has a variety of intelligent functions, such as overload alarm, fault detection, status indication, etc.Long distance data transmission can be realized through digital bus interface.The function can be upgraded continuously without other hardware cost. Product Parameters ItemTechnical parametersOutput signal5-15kHz/ 0-10V /4-20mA /RS485Overload capacity120%Accuracy class0.5%Power supply24 VDCWorking speed: 0-4000 rpmResponse frequency 100 μ sInsulation resistance> 200m ΩZero drift < 0.5%Repeatability< 0.2%Linearity< 0.2%Ambient temperature- 40-60 oCRelative humidity< 90% RHOperating temperature range- 10-70 oCStorage temperature range- 25-80 oCSensor amplitude10VSensor power consumption ≈ 4WCurrent consumption of sensor100mAResponse time of dynamic strain wave of strain gauge3.2x10-6sSensor housingstrongly anodized aluminum Model Model order No.Rated torque NmWorking speed rpmMax working speed (customized) rpmMeasurement accuracy %FSSpeed measurement pulse/rpmSLZN05510000500000.2/0.560SLZN202010000500000.2/0.560SLZN505010000500000.2/0.560SLZN10010010000500000.2/0.560SLZN20020010000350000.2/0.560SLZN30030010000350000.2/0.560SLZN5005008000300000.2/0.560SLZN100010008000300000.2/0.560SLZN200020006000250000.1/0.2/0.560SLZN500050006000250000.1/0.2/0.560SLZN10000100005000200000.1/0.2/0.560Why choose usAfter years of development and accumulation, the company has become a well-known powertrain test equipment production enterprises. Specializing in engine test, transmission test, energy storage test, controls and electric motor test and other test equipment research, development and production service. The company has established long-term cooperation with tsinghua university, Shandong university and many other domestic scientific institutions. We have successfully passed the ISO9001 Quality System certification, obtained a dozen of invention patents and two software copyrights. We have provided professional services and equipment for more than 100 users at home and abroad and which is ongoing now and will continue in the future.Packaging & Shipping FAQQ: What's the minimum order quantity for our cooperation?A: We support small trail order of 1 pcs for stock products.Q:How can I learn more about the products?A: Please leave your email and we will send you your electronic sample book.Q: What's your payment term?A: Normally 40% T/T deposit, pay in full before shipment.Q:What's the lead time for my orders?A: Dynamometers production cycle is 6-8 weeks, sensors production cycle is 2-3 weeks, other products please contact with us.Q: How do we get the overall solution of the test bench?A: Leave us your email, our technical staff will communicate with you about the detailed plan.Q: Can I come to visit your factory?A: Sure, you are always welcomed to have a visit.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...