IPDB › China Industry › Chemicals
China, Chinese Premium UV Clear Matte Varnish for Professional Finishing1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Paint CoatingPaper CoatingUV Clear VarnishMatte Varnish
Mejoel Technology Co., Ltd.
Preview:
Product Description Product description MQ513 matte UV varnish has a good matte effect. Its sub-degree is below 30 degrees, the specific matte degree can be adjusted according to customer requirements, so that the product can achieve the ideal matte effect. The gloss is soft, the grinding surface is flat, the varnishing process is not sticky powder in the rubber roller and has good anti-anti-adhesive and anti-wetting properties after varnishing. It has good printing ink adhesion.Appearance light yellow transparent liquidViscosity (cup DIN 4 mm, test at 25°C)30-40sGlossiness5-15°Solid content50%Abrasion resistance (4 lbs)≥500 timesCuring conditionvarnishing speed above 2m/s, UV light intensity 80w/cmUse method 1. Mix thoroughly before use, park for 3-5 minutes for printing, and seal and save after use;2. UV curing immediately after glazing;3, when sealing the screen, use screen cleaning agent to clean, until the solvent is completely volatile before printing;4, when printing especially thick ink layer, considering that after printing after UV light solidifying machine after the heat is too high to cause anti-stick phenomenon, with a thousand layer frame (dry frame) or erected to volatilize part of the heat after stacking;5, printing scraper tilt, printing machine function to "stop or screen", mesh thinning, printing scraper pressure adjustment can increase the thickness of UV varnish. The speed of UV light fixing machine and the ambient temperature can affect the surface leveling.Matters needing attention1. it is recommended to use solvent resistant, alkali resistant and alcohol resistant ink printing;2. Add 5%-10% thinner to dilute;3. If drying is too slow, the paper walking speed can be appropriately reduced. If the drying is still not complete, it may be that the power of the UV lamp is too low, and it is recommended to use the radiation instrument for testing, and the lamp is recommended to be replaced after 800 hours;4. this product has a certain irritation, avoid direct skin contact, if contact with detergent to clean;5. the product should be placed in cool, dry and ventilated conditions, away from heat.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...