IPDB › China Industry › Packaging & Printing
China, Chinese High Speed 9000 Sheets/Hour Automatic Overall and Spot UV Coating Machine1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Post Press EquipmentPolishing / Glazing MachineUV Coating MachineSpot UV Coating Machine
Hangzhou Ecoographix Digital Technology Co., Ltd.
Preview:
Product Description High Speed UV Spot and Overall Varnish Coating MachineModel: Ecoo SD-1060W Product Description Introduction: The High Speed UV Spot and Overall Coating machine SD1060W adopts upper-sway gripper-pass-sheet method to enable max speed up to 9500 sheets/hour. UV curing system with Teflon conveying belt has characteristic of higher speed, precise orientation and UV curing higher efficiency and lower power consumption. It is used for both thick and thin papers, and can be used for both full and partial UV varnish coating or water based varnish coating. Application: Specification ModelEcoo SD-1060WMax.sheet size 730x1060mmMIN.sheet size 310X406mmMax.coating size 720x1050mmSheet thickness 80-500gsmMax Coating Thickness0.025mmCoating MediaWater Base Varnish or UV VarnishCoating registration accuracy±0.2mmProduction speed 9000 sheets/hourWeight 8 TonDimension 10460x2725x1930mmPower Max 44KWRemark: Production speed depending on sheet weight, size and qualityFloor Plan:Coating rollers: Coating with Anilox Roller Coating with Rubber roller No.Name of machineName of material ACylinder ex. DiameterBCylinder length1Impression rollerFine grindingФ 310mm1116mm2Plate or Blanket Rubber rollerFine grindingФ 305.2mm 1110mm3Coating material rollerU.V rubber coatedФ 165.3mm 1100mm4Chromed rollerSurface chromedФ124mm 1118mm*Anilox roller is suitable for some high precision UV coatings, but different varnish thickness needs different lines of anilox roller.* Rubber roller is suitable for different varnish thickness,varnish volume can be adjusted by the pressure between the rollers and metering of speed. It can do the varnish thickness up to 7g/m2. Rubber roller for exampleU.V Roller (Full) coating1. Clamp and lock both ends of the rubber blanket.2. Prepare a piece of paper (thickness: 0.5mm) or transparent film for under spacing paper.3. Hang one end of the rubber roller on the blanket clamp and flatten the rubber blanket.4. According to Inching, load the paper and hang another end of the rubber blanket onto the other end of the clamp. U.V. Spot Coating 1. After the positioning by front lays and side lays, the middle pass gripper catch and relay the paper into the paper gripping mouth, and bring them into the pressure roller and the rubber roller for impression by which the pasted U.V. varnish on the plate will be coated on the paper surface which will be spot coated.2. Prepare the paper sheet or transparent film with 0.5mm in thickness for the use of transfer bottom board.3. Lock the two ends of bottom board on the clamped board tightly.4. Draw a straight basic line parallelly at the distance of 40 mm from position C on the bottom board. When the bottom board is hung on the rubber roller, this line should be on the same line of the folded line of the rubber roller.5. Take out a piece of paper to be coated, make an arrangement of size of the to-be-coated part. Put the positive surface of the to-be-coated paper on the working table, cut the part of the to-be-coated paper, and then put the negative surface of the to-be-coated paper on the bottom board.( At this time, the front side of paper should be on the same line of the basic line or forded line), draw the outline of the to-be-coated part on the bottom board.6. According to the cut part for coating of the paper, make a rubber blanket of the same size or flexo plate which will be stuck to the outlined bottom board with double-face glues.7. Lock the bottom plate to the rubber roller and run the rubber roller by inching to make another side of the bottom plate to another clamp of rubber roller. Move the offset shaft with a wrench to the top position and gripper both sides of the bottom plate and make bottom plate stick to the rubber roller tightly.8. The size of the rubber blanket: (perimeter) 820 x 1060mm(width)9. Anilox Lines and Varnish Volume Producing And Packaging Installations worldwideAbout our technology and strength, most of our technicians (and the owner) are from Tsai Yi of Taiwan, which was the leading manufacturer of the packaging machines, including the coating machine, flute lamination machine, die cutter and so on, they have more than 30years' technical skill and experience, and pay highly importance on the machine quality. There are hundreds of the varnish coating machines installed worldwide, about 60sets in China, 60sets in Thailand, Netherlands, Greece, Turkey, Egypt, Peru, Mexico, Colombia and many in other countries, too.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...