IPDB › China Industry › Industrial Equipment & Components
China, Chinese 100cpsi/200cpsi Honeycomb Ceramic Catalytic Converter DPF/Doc/SCR Diesel Particle Filter1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Gas Generation Equipment PartsGas RecoveryDoc Catalytic ConverterCatalytic Converter Honeycomb
Pingxiang Bestn Chemical Packing Co., Ltd.
Preview:
Product Description Diesel Particulate Filters are used in trap systems that remove particulate matter (soot) from diesel exhaust emissions. These filters have a cellular structure with individual channels open and pligged at opposite ends. Exhaust gases enter the open end, flow through the pores of the cell walls, and exit the filter through the adjacent channel. Sool particles are too large to flowthrough the pores, and they collect on the channel walls. Periodically the filter is regenerated (heated) to consume the soot and clean the filter. Outside DimensionItemIndexWall Thickness100CPSI0.46±0.04 mm 200CPSI0.36±0.04 mmOutside DimensionOutside Diameter:≤120mm±1.0mm ≥120mm±1% Height:≤150mm±1.0mm ≥150mm±1%Hole Density(Hole number per square inch)100CPSI100±10 200CPSI200±10Physical and Chemical PropertiesItemUnitIndexChemical CompositionAl2O3%35.4±1.5 SiO2%50.9±1.5 MgO%13.5±1.5Room Temperature Compressive StrengthMpa≥10.0Porosity%≥50Maximum Use Temperature°C1400Thermal Expansion Coefficient(800°C)10-6/°C≤1.5The Average of Pore Diameterum10-15Size(Diameter × length)Cell densityShapemmInches100/200CPSIRotundityΦ118.4×152.4Dia.4.66×6100/200CPSIRotundityΦ118.4×254Dia.4.66×10100/200CPSIRotundityΦ127×152.4Dia.5×6100/200CPSIRotundityΦ127×180Dia.5×7100/200CPSIRotundityΦ127×254Dia.5×10100/200CPSIRotundityΦ144×152.4Dia.5.66×6100/200CPSIRotundityΦ144×203Dia.5.66×8100/200CPSIRotundityΦ144×254Dia.5.66×10100/200CPSIRotundityΦ144×305Dia.5.66×12100/200CPSIRotundityΦ190×152.4Dia.7.48×6100/200CPSIRotundityΦ190×203Dia.7.48×8100/200CPSIRotundityΦ190×305Dia.7.48×12100/200CPSIRotundityΦ240×240Dia.9.45×9.45100/200CPSIRotundityΦ240×305Dia.9.45×12100/200CPSIRotundityΦ250×305Dia.9.84×12100/200CPSIRotundityΦ260×305Dia.10.23×12100/200CPSIRotundityΦ267×254Dia.10.50×10100/200CPSIRotundityΦ267×305Dia.10.50×12100/200CPSIRotundityΦ286×267Dia.11.26×10.50100/200CPSIRotundityΦ286×305Dia.11.26×12100/200CPSIRotundityΦ286×355Dia.11.26×13.97100/200CPSIRotundityΦ286×381Dia.11.26×15100/200CPSIRotundityΦ305×305Dia.12×12100/200CPSIRotundityΦ330×381Dia.12.9x15100/200CPSIRotundity1.Large specific surface area: Ensure sufficient contact between exhaust gas and catalyst. 2.Stable water absorption performance: Ensure that the catalyst is firmly and evenly coated on the surface of the carrier, while not wasting due to excessive coating. 3.Warming-up performance: It is required that the temperature of the carrier can reach the active temperature of the target catalyst in a short period of time after the engine is started. 4.Low exhaust resistance: It is required that the carrier has minimal exhaust resistance to the engine, ensuring that it does not affect the performance of the engine. 5.High strength: As the working environment of the carrier is on bumpy cars, it is required that the carrier have high strength and not be damaged by external forces. 6.Good assembly: A component of the exhaust assembly of the carrier, only with a good appearance and size can assembly be ensured.Performance item characteristic value Thermal performance coefficient of thermal expansion (40-800 oC)( × 10-6/oC)<1.0 Specific heat [J/(g.k)] 0.84 Softening temperature (oC) 1400 Melting point (oC) 1455 High usage temperature (oC) 1350 Physical properties Fine pore volume (cm3/g) 0.2 Apparent porosity (%) 36 Average fine pore size (um) 4 Mechanical properties Compression failure strength A particulate filter is installed in the exhaust pipe of the engine, and the filtering materials can be ceramic honeycomb carriers, etc. The working principle is that the particulate matter is first captured by the filter, and then the particulate matter captured in the filter is oxidized and burned to complete the regeneration of the collector. After collecting a certain amount of particles, it can lead to an increase in filter back pressure, a decrease in filtration efficiency, and a deterioration in the economy and power performance of diesel engine operation. Therefore, under certain conditions, DPF is regenerated to remove particles from the DPF. The regeneration of DPF includes active regeneration and passive regeneration.Its disadvantages are difficulty in regeneration and high regeneration frequency. The thermal oxidation temperature of carbon particles can reach 825-875K, while the exhaust temperature of diesel engines is 450-675K. So it is necessary to add an external heat source (such as electric heating, microwave heating, etc.) or choose a highly active catalyst to reduce the oxidation temperature of carbon particles, so that the filtered carbon smoke particles are oxidized and removed for regeneration. However, the regeneration process can generate high temperatures above 2000 oC, which can easily melt the ceramic carrier or cause local overheating and burning loss.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...