IPDB › China Industry › Chemicals
China, Chinese MS710X All Fix High Tack Strength MS Polymer Sealant For Structural Bonding1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
AdhesiveAdvanced Polymer AdhesiveHigh Tack MS SealantUltra White MS Sealant
Nanjing Howell New Material Technology Co., Ltd.
Preview:
Product Description All Fix High Tack And Strength MS Hybrid Sealant HM-MS710XItemsC*a/T*b/S*c/O*dUnitTypical ValueRequirementTest Std.Eqv. Std.Appearance -White,Black,Gray,Red,Blue...... Fine, uniform paste without bubbles, crusts, gelsTest StQ/QY-00-T001d-Density g/cm31.041.05±0.02GB/T 13477.2-Tack freeProperties Uncuredmin20≤30GB/T 13477.5ASTM D2377:2000Hardness, Shore AProperties Cured-35≥35GB/T 531.1ISO 7619-1:2004Elongation at breakProperties Cured%350≥350GB/T 528ISO 37:2005Tensile StrengthProperties CuredMPa2.0≥2.0GB/T 528ISO 37:2005These figures are only intended as a guide and should not be used in preparing specifications.PRODUCT DESCRIPTIONMS710X is a series high bonding strength and high glossy MS hybrid polymer (SMP) structural sealant. it is made of Howell own technology MS polymer and shows a great bonding performance to various surfaces that require excellent bonding strength such as elevtor, containers, vehicle assembly etc. It is all colors customized, low VOC, eco-friendly and paintable, thus an ideal glue for you to bond parts need good strength and various colors customization.High glossy with various colorsStrong bonding on almost all surfacesHigh strength and good hardnessSuperior physical propertiesOne component, easy to processEco friendly-no isocyanate, solvent, halogen or acid components: harmless to health-Paintable with water based coatingsDurable elasticity after curingAPPLICATIONSSealing and bonding of the construction industry applicationsSanitary and kitchen application: Mildew proof Structure bonding having the demand of expansion adhesionUSAGEConstruction:Cut the branch opening, put on the glue nozzle, cut the glue nozzle into a suitable slope, and apply it tothe construction site with a glue extrusion gun. During pneumatic gluing, the air pressure isrecommended not to exceed 0.4 MPa, and the construction temperature is recommended to be 4°C -40°CCuring:Place the glued parts in the air. After the skin is formed, it will cure from the surface to the inside. Thecuring depth will be 2~4mm within 24 hours at room temperature and 55% relative humidity. As timegoes by, the curing depth gradually increases.Storage:Unused glue should be tightened immediately and the nozzle should be sealed for storage. When usingit again, if there is a little crust on the seal, just remove it and it will not affect normal use. During thestorage process, a small amount of crusting may also appear on the branch mouth. After removal, it canbe used normally without affecting product performance. PACKAGEStandard 300ml plastic bottle packing, 24pcs/carton; 500-600ml flexible film packing, 20pcs/carton;A variety of packaging options are available to meet your needs.Store the original sealant in a dry place, the temperature should not be higher than 27 °C, and the storageperiod is 12 months from the date of productionSAFETY PRECAUTIONS Ensure the product is kept out of children's reach. Always read the product specifications, material details, and instructions on the container packaging before use.Company ProfileNanjing Howell New Materials Technology Co., Ltd.Room 501, Unit 7, Xingzhihui, Xinghuo Rd 19th, Jiangbei New District, Nanjing, (211899), Jiangsu, China.American Warehouse:Add: 1006 CROCKER RD, DOOR E5, WESTLAKE, OH 44145
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...