IPDB › China Industry › Instruments & Meters
China, Chinese Fluke Networks MS-POE Cable Verifier MicroScanner™ Cable / PoE Tester1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Test InstrumentCable TesterFluke MS-POEFluke Cable Verifier
BNSENS Co., Ltd.
Preview:
Product DescriptionProduct DescriptionProduct overviewMicroScanner? PoE cuts through the confusion of your PoE installation by providing swift and simple PoE verification.The tester detects the available PoE class (0-8) in accordance to the latest PoE standards and displays the voltage from passive PoE sources. Everything cable technicians need to know, including available services (up to 10G Ethernet), cable length, wiremap, cable ID, and distance to fault are all shown on the LCD screen.Built-in IntelliTone digital and analog toning precisely locates virtually any cable or wire pair – even on active networks.The ergonomic design features sleek rubber overmold to enhance grip and ruggedness.Includes MicroScanner? POE (Power over Ethernet) cable verifier with detachable wiremap adapter, getting started guide (10 languages), 2 AA alkaline batteries, carry pouch, and one year warranty.FeaturesModel? Report PoE class (0-8)? Display network switch speeds capabilities up to 10G? Ethernet Alliance Certified to IEEE-802.3? standards? Display cable length, wiremap and distance to fault? Locate and trace cable with toning (probe sold separately)MS-POE Cable VerifierPart#: 5018508UPC#: 7 54082 14852 4Includes:MicroScanner? POE (Power over Ethernet) cable verifier with detachable wiremap adapterGetting started guide (10 languages)2 AA alkaline batteriesCarry pouchOne year warranty1. On/off key.2. Turns on the toner.3. Starts the cable test.4. Starts the Power over Ethernet test.5. Scrolls through screens and changes settings. In toner mode, this key cycles through the IntelliTone and analog toner songs. For additional modes, hold down keys while turning the tester on:? Lets you calibrate length measurements and select meters or feet as the length unit. ? Activates a demonstration mode where the tester shows examples of test result screens. Note? Auto shutoff is disabled in demonstration mode.? Displays the version and serial number screens.6. LCD display with backlight.7. Modular jack for connecting to telephone and twisted pair network cable. The jack accepts 8-pin modular (RJ45) and 6-pin modular (RJ11) connectors.8. Wiremap adapter with 8-pin modular jack. 9. Optional remote ID locator with 8-pin modular jack. 10. Magnetic hanging strap. Attach and use the strap as shown.1. Detail screen indicator.2. Tone mode indicator.3. Power over Ethernet mode indicator.4. Numeric display with feet/meters indicator. MicroScanner PoE also shows watts or volts when it detects 802.3 compliant (W) or passive (V) PoE.5. Test activity indicator, which is animated when a test is running.6. IntelliTone appears when the toner is in IntelliTone mode. 7. Low battery indicator. 8. Telephone voltage indicator.9. Indicates a wiremap adapter or remote ID locator is connected to the far end of the cable.10. The 7-segment display shows the number of the ID locator connected to the far end of the cable. A ] shows for the wiremap adapter.802.3 Class and the 7-segment display show the maximum class of PoE available (802.3 classes 0 through 8). 11. Indicates a short on the cable.12. Ethernet port indicator.13.Wiremap diagram. For opens, the number of segments lit for the wire pair indicates the approximate distance to the fault. The rightmost segments indicate the shield.14. The indicates a fault or high voltage on the cable. SPLIT appears when the fault is a split pair. SpecificationSpecifications apply at 23 °C (73 °F), unless otherwise noted.Environmental specificationsOperating temperature32 °F to 113 °F (0 °C to 45 °C)Storage temperature-4 °F to +140 °F (-20 °C to +60 °C)Operating relative humidity (% RH without condensation)90 % (50 °F to 95 °F 10 °C to 35 °C)75 % (95 °F to 113 °F 35 °C to 45 °C)Shock and VibrationRandom, 2 g, 5 Hz-500 Hz (Class 2)1 m drop test with and without wiremap adapter attachedSafetyIEC 61010-1 3rd EditionAltitude4,000 m; Storage: 12,000 mEMCIEC 61326-1General specificationsTest connectorsShielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs.PowerBattery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteriesBattery life: 20 hours of typical useOther compatible battery types: 2 AA photo lithium, NIMH, NICADDimensions and weight (with batteries installed and wiremap adapter attached)3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)MicroScanner? PoE: 10.6 oz (300 g)DisplayMonochrome LCD with backlightTest modesCable testMeasures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner? PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.ToneGenerates IntelliTone? and normal analog toning signalsPoEMicroScanner? PoE: Solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco’s Universal Power over Ethernet) compatible PoE devicesPerformance specificationsCable types testedTwisted pair: UTP, FTP, SSTPLength testRange: 460 m (1500 ft)Resolution: 0.3 m (1 ft)Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.Calibration: User-settable NVP for twisted pair. Can determine actual NVP with known length of cable.Wiremap testDetects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.Ethernet port detectionMicroScanner? PoE: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps.Tone generatorSupports toning and cable mapping with a Fluke Networks digital IntelliTone? probe. Generates four tones compatible with typical analog probes. SmartTone? feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.Company Profilehttps://bnsens.en.made-in-china.com/product-list-1.htmlBNSENS (Nanjing) Sensor Technology Co., Ltd. is located in Nanjing, China. It is a high-tech enterprise specializing in the development, manufacturing and trade of sensor products. The company has brought together a group of outstanding technical experts in various fields such as automation, electronics, machinery and computers. All employees of the company have college degrees or above. It adopts the world-class management and operation model and 6 sigma quality system. At present, the company's main products are pressure, liquid level, flow, current, switches, network products, etc. The company's users are all over the country, and some products have been exported to Japan, South Korea and Southeast Asia.Since its inception, the company has been based on the technical accumulation and management standards of American sensor giants. It is composed of senior engineers and managers who have served in multinational companies for many years, and has rapidly developed various pressure sensors, transmitters, liquid level, flow meters, pressure switches, digital meters, current sensors, proximity switches and other products. After years of unremitting efforts, it has become one of the leading suppliers in the domestic automation industry. Our pressure transmitters can achieve an accuracy of more than 3/10, 000. The products have been widely used in oil, natural gas, electricity, chemical industry, metallurgy, building materials, food, light industry, environmental protection, aerospace, tap water, municipal and other industries.The company has a number of ASIC chips independently developed, which are widely used in industrial, automotive, home appliance and other markets.BNSENS (Nanjing) Sensing Technology Co., Ltd. is a strategic partner of Honeywell in China. The two parties proposed a plan of East serving East and jointly developed several sensors specifically for the Chinese market. These sensors will be widely used in intelligent manufacturing, Internet of Things, artificial intelligence, and smart home fields. These sensors include: Magnetic sensors, temperature sensors, humidity sensors, force sensors, fire water pressure sensors, equipment vibration sensors, human body status monitoring sensors, motion sensors, etc.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...