IPDB › China Industry › Instruments & Meters
China, Chinese Auto and Manual Mode Fire Security Alarm Control Systems1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Fire ControlFire Alarm Smoke DetectorFire Alarm SystemSecurity Alarm System
Zuden Technology (HK) Co., Limited
Preview:
Product Description Product DescriptionAuto and Manual Mode Fire Security Alarm Control SystemsConventional Fire Alarm Control Panel: ZD1000 automatic fire alarm system-typically made up of smoke detectors, heat detectors, manual pull stations, audible warning devices, and a fire alarm control with remote notification capability-can provide early warning of a developing fire.The ZD1000 is a 4-zone to 16-zone FACP (Fire Alarm Control Panel), which uses conventional input devices. The panel accepts water flow devices, two-wire smoke detectors, four-wire smoke detectors, pull stations and other normally-open contact devices. Outputs include four Notification Appliance Circuits (NAC, SOUND1-4), three standard Form-A relays (alarm, trouble and supervisory) and an EIA-485 port to interface with remote annunciators and optional remote relay modules. The FACP is field programmable via the panel keypad. It also supervises all wiring, AC voltage and battery level. FACPNumber of Detection ZonesNumber of Sounder OutputsOutput Delay SettingsZD100441N/AZD100882N/AZD1016164N/AOptional model: ZD1000-8: 16 Zone, 2 Sound OutputZD1000-8: 8 Zone, 2 Sound OutputZD1000-4: 4 Zone, 1 Sound Output Features- 4,8,16 Class B Initiating Device Circuits (IDCs)All zones accept conventional detectors and any normally open contact device- Four Class B Notification Appliance Circuits (NACs)- One Form-A Alarm Relay- One Form-A Trouble Relay- One Form-A Supervisory Relay- 3.0 amps of system power - Max 20 conventional detectors in one zone.- Auto/Manual mode setting enable walk test.- Each Zone can be disabled,- Sound output can be disabled.- Manual active sound output enabled.- Designed with standby batteries and space provision for two sealed lead-acid batteries.- Testing and disable functions. Product ParametersAC Power : 220 VAC, 50 Hz, 2.3 ampsWire size: minimum #14 AWG (2.0 mm2) with 600V insulationBattery (lead acid only) Maximum Charging Circuit: Normal Flat Charge-27.6V @ 0.8 ampMaximum Charger Capacity: 18 Amp Hour batterSound Output Device Circuits General Alarm Zones 1 through 16Operation: All zones Class BNormal Operating Voltage: Nominal 24 VDC (ripple = 100 mV maximum)Alarm Current: 15 mA thresholdShort Circuit Current: 42 mA maximumMaximum Loop Resistance: 100 ohmsEnd-of-Line Resistor: 4.7K, ? wattDetector Loop Current is sufficient to ensure operation of two alarmed detectors per zoneStandby Current: 7.26 mAThree Relays OutputRelay contact rating: 2.0 amps @ 30 VDC (resistive), 2.0 amps @ 30 VAC (resistive)Nonresettable 24 VDC Power Maximum ripple voltage: 10 mVRMS Operating Voltage nominal 24 voltsTotal DC current available from this output is up to 500 mA Recommended maximum Standby current is 150 mA Related Products
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...