IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese Kl-Zx Efficient Desander1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Petroleum Equipment MachineryMud Circulating SystemDesanding EquipmentDesander
Shanghai Kinglink Industry Co., Ltd.
Preview:
Product Description Overview of product ZX-Desanding plant is suitable for water and electricity, urban construction and Reverse Circulation Drilling (trough) and balance shield construction of cement slurry purification and recovery, not only reduce construction costs, but also can reduce environmental pollution, is the foundation of civilized construction of the necessary. You can use the device to create the following advantages: A. Full purification of mud, favorable to control mud index, to reduce drill seizure phenomena and to increase drilling quality; B.Effective separation soil and slag, favorable to increase drilling efficiency; C. Repetition use of mud, favorable to economize mud making materials and to reduce the construction cost; D. Close-cycle purification of mud and low water content of slag materials is advantageous to reduce environmental pollution. To sum up, ZX-Desanding plant will help the relevant construction quality, efficiency, economy, civilized manner. Main features: a. Large capacity to purify sewage slurry; high effective sand out purification; b. Failure ratio of simple operated oscillating screen is low and its installation, operation and maintenance is convenient; c. Slag materials screened by advanced straight-line oscillation have a very good dewatering efficiency; d. Adjustable exciting force of oscillating screen, face and mesh size can make the system to have a good screening efficiency in all strata; e. Screening efficiency of oscillating screen is so high that a kind of all drillers can bore and feed in various strata; f. Energy saving efficiency is significant because the power factor of oscillating motor is high and power consumption is low; g. Low operation noise of oscillating screen is favorable to improve the working condition; h. Abrasion and corrosion resisting centrifugal mud pump (slag mortar pump) has the following advantages: advanced construction, highly level commonality, reliable operation, convenient assembly and dismount, simple maintenance etc. The thicker abrasion resisting parts and the balance-type support can make the pump to convey the strong corrosive and abrasive, high concentration slag mortar; i.The hydraulic cyclone with advanced construction parameter has an excellent mud and sand-sorting index. The corrosion and abrasion resisting and the lightweight of cyclone material can run in the worst condition without maintenance and has the following features: convenient operation and adjustment, economic and durable; j.The new fluid level automatic balancing device can not only hold the stable fluid level of mud reservoir, but also handle mud repeatedly in order to increase purification quality further; k.The unique recoil device can prevent mud reservoir from silting and flooding in order to run normally and long term; l.In the part of electric control, the logical control system of electric relay is adapted with simple wiring, strong capability of anti jamming and convenient maintenance.Application profileWith continuous expansion of infrastructure construction in countries, increased diameter and depth of the pile and wall foundation and higher quality standards, how to increase drilling efficiency, reduce pollution of slurry on the environment based on assuring construction quality is the issue to be met and resolved for the foundation project circle.In the process of foundation construction, purification treatment of slurry plays a key role in increasing drilling efficiency, assuring holing quality, reducing construction cost and reducing environmental pollution. How to reasonably configure the slurry circulation and purification system, timely remove the drilling slag and control the slurry index, different drilling and construction methods are required, and the slurry purification and treatment system technology research is required. According to different index requirements at different stratum and in combination with research achievements and experience in the slurry circulation and purification technology in relevant construction methods, the following several implementation construction proposals are recommended for the supporting slurry treatment system in the piling wall foundation project construction. I) Performance of influences on hazard solid phase1,Influences on drilling rate With high solid contents, density, viscosity and shearing force of the slurry are increased and rheology is weakened. The pump delivery performance is reduced, cleaning effect at the bottom of the hole is poor and the drilling rate is reduced sharply.2,Influences on slurry film Thickness of the slurry film depends on size, quantity, shape and plasticity under certain pressure of the solid phase particles. If the slurry film is too thick, the drilling is not smooth, which may cause pumping or fluctuated pressure and hole collapse; and block drilling accidents and etc.3,Influences on the slurry circulation system If the solid phase content is larger, mechanical wear of the slurry circulation system is more, which makes early wear of the slurry pump blade, the drill service life is shortened and drilling efficiency is reduced. II) Method of reducing solid phase contentDilution method: dilute with a lot of clear water, which consumes treatment agent and water, and is not safe in the hole.Replacement method: replace slurry with high solid phase content with the slurry with low solid phase content, which is high cost and inefficient.Sedimentation method: sediment the drilling scrap with gravity, which needs a relatively longer circulation system (a large floor area) and a long time, but the results are not excellent.Mechanical purification: vibration screen, rotary flow separator, centrifugal or pressing filtration separator and other mechanical purification equipment is used for compulsory sand or slurry removal. The mechanical treatment method is superior to the dilution method and replacement method on economic and operation efficiency.Technical and performance parameters of desander products of series ZX1) Maximum slurry treatment capacity of the desander (system) includes 20-500m3/h in accordance with different machine models; through equipment integration and combination, maximum treatment capacity of the system can satisfy the demands of slurry treatment of the project, and the single set treatment capacity can reach 3000m3/h.2) Based on different slurry particle separation indexes, the single desander can constitute multi-level treatment system. Clients can select one-time treatment with separation particle sizes of 74, 45, 30 and 20μm or pre-screening plus several times of sand and slurry removal equipment.3) Based on different slurry treatment capacity, vibration screens of the products are provided with several vibration models (ellipse and straight line), multiple dimensions, multiple insulation vibration means, multiple screen models, regular or frequency conversion control. Screening capacity of the slag includes 10-200t/h series, which matches efficiency of the drilling and shield tunneling.4) Water content of the products screened from the sand soil layer is lower than 30% and satisfies the demands of transporting to the outside.5) Upon reaching the single separation indexes, density of the slurry to be treated is less than 1.3g/cm3, less than 30s for SUS funnel and sand content less than 20%. Analysis on use effectsProject name: pile foundation project at construction site in Wuhan Pile diameter:1.5m pile length:60.892m working method: impact and positive circulation The cost comparison sheet is made for drilling, slag removal, hole clearing and slurry transported to the outside (Sedimentation for B1, and desander for B2)Pile No. Drilling(h) Hole Clearing(h) Accumulated for holing(h) Saved(h) Effciency increased(%) B1 276.00 24.00 300.00 B2 202.50 3.30 205.8 94.20 31.40 Pile No. Drilling CostDeslagging Cost Hole Clearing Cost Slurry Transport CostAccumulative Cost Saved Cost(%) B1 1.66 0.17 0.03 0.4 2.2 B2 1.21 0.86 0.01 0.2 1.5 33.45)Analysis on use effectsThrough the above data analysis, the following analysis conclusion is obtained:1. If the desander is used in the process of holding, solid phase content of the slurry is effectively controlled, performance index of the circulating slurry is improved, drilling time is reduced by 73.5 hours, hole clearing time is reduced by 20.7 hours and holing efficiency is increased by 31.40%.2. If the desander is used in holing, dry slag 30m3 is separated, which reduces the volume of slurry transported to the outside 70m3 and the reduces the quantity discharged to the outside by more than 54%, avoids uncontrolled sewage at the construction site, improves civilized construction, reduces environmental pollution and saves costs for discharge to the outside.3. If the desander is used in holing, electricity of 5284.80 kWh and water of 119t are saved, which reduce construction cost and are consistent with the low carbon and environmental protection guideline of building the saving society and promoting green and environmental protection.4. If the desander is used in holing, sand content of the slurry is controlled at lower level, which reduces wear of the machine tools, improves piling quality and guarantees safe drilling.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...