IPDB › China Industry › Instruments & Meters
China, Chinese Aice Tech Precision Tuning Fork Level Switch for Measurement1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
SensorLiquid Level SensorTuning Fork Level SensorCompact Fork Level Switch
Jiangsu Aice Instrument Technology Co., Ltd.
Preview:
Product Description Storage slot installation dimensions, examples and precautions: 1. During installation, the switch can be installed at an angle of 15-20 degrees horizontally downward to reduce the impact of materials and the occurrence of hanging materials. 2. It should be possible to be far away from the inlet of the barrel during installation to avoid material impact and false alarms. If it is unavoidable, a partition must be installed between the feed inlet and the material level for protection. 3. The cable inlet of the junction box must face down, and the fixing nut of the power cable inlet must be locked. 4. When the staff is working in the bucket, it is strictly forbidden to use the vibrator to climb or hang any ropes and objects. Terminal description: Relay wiring (brown-power positive, blue-power negative, black-NO white-COM gray-NC) PNP output- (brown-power positive, blue-power negative, blue+gray PNP) NPN output- (brown-power positive, blue-power negative, brown+black NPN) I.operation declaration: 1. Put the fork body into the measured object and determine the alarm position of the fork body long press "SET" button or close "SET" with a magnet for 3 seconds, the setting is complete. II.special explanation: 1. This sound fork has a self-inspection function. On the one hand, it is to overcome the vibration absorption phenomenon after the fork body is installed on the bucket wall, and on the other hand, it is to prevent miscellaneous interference and avoid misaction. III. The factory setting value of the product is the density of water (1g / cm 3), as the benchmark for state switching. When the density to be measured is greater than or equal to 1g / cm 3, it can be used normally without re-learning.When the density to be measured is less than 1g / cm 3. service voltage19…60VDC 50/60Hzswitching timeAbout 2 seconds when covered with the medium, and about 3 seconds when the medium is freeambient temperature-40…+80oCStorage temperature-40…+85oCmedium temperature-40…+150oCon-stream pressure-1…+40barSubstances testedPowder and particles =10mm, with a density> 0.1g / cm 3 Liquid, viscosity = 10,000 m m2/s, density> 0.7g / cm 3attended modeG1-N11*Electrical interfaceM12 P1.0 ConnectorShell materialStainless steel S304Fork materialFork materialStainless steel S304 / stainless steel S316Output mode is Outputrelay output,Negative numbers were AC250V / 4A, and DC60V / 4A Collector open circuit (NPN) output, with a negative number of 400mA Collector open circuit (PNP) output, with a negative number of 400mApower dissipation0.25W 1.5W AC for DC supply
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...