IPDB › China Industry › Instruments & Meters
China, Chinese Drag Type Cptu Static Cone Penetrometers (CPT) Machine1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Test InstrumentOther Test InstrumentCone Penetration Testing (CPT)Static Cone Penetrometers Test
Zhuozhou Tianpeng Imp. & Exp. Trade Co., Ltd.
Preview:
Product Description Drag type CPT Machine (TPC-15T, TPC-20T) It has two axles each of which assembles two tyres under the chassis. At each corner of the chassis, there is one mechanical support leg, namely total four legs, to lift the chassis.Drag type CPT Machine is developed on the basis of the current domestic commonly used bulk hydraulic twocylinder static penetration testing machine, it absorbs the advantages of the structure of the bulk hydraulic static testing machine, light and flexible, easy to operate. With the advantage of large-scale static probe vehicles that can be easily transported over long distances, a trailermounted chassis is set up, and the dispersed components are arranged in an orderly manner, thereby reducing labor intensity and improving work efficiency. In addition to the conventional static penetrating test, it can also be subjected to tests such as flat scoop swell test, field cross-plate shear test, wave velocity test, hole pressure multi-function static probe and so on. test. ModelTPC-15 T/TPC-20T Max force150kN, 200kN DriveDiesel Engine, Electric starting Dimension(mm)2800×1560×1500mmWeight2000Kg Wheel type CPT vehicle uses hydraulic transmission system to penetrate, anchor, level and lift car body, etc. The hydraulic system's oil is supplied by a large flow and high-pressure gear pump with an advanced directioncontrolling combination multi-way valve which is installed in the console center. Each a hydraulic valve controls one circuit. On the right of multi-way valve, the relief valve is installed to control the oil pressure. Engine type: Diesel CZ2100Max speed: 40KM/hMax force: 150kN, 200kN, 250kNDrive: Diesel Engine, Electric startingOil pressure: 10 MpaPenetration speed: 1.2±0.3m/minDimension(m): 3.1×1.6×1.63Weight: 3000Kg TPC-20L/TPC-25Crawler type CPT vehicle shares the same working principle with other CPT machine. It uses Hydraulic transmission technology and uniformly pushes CPT cone attached with electric resistance strain chip to the soil. The electric resistance strain chip will transduce the resistance between the cone and the soil layer to electrical signal which will be transmitted to data acquisition system for reading, recording and confirming the mechanical parameters of foundation design.Crawler type CPT vehicle shares the same working principle with other CPT machine. It uses Hydraulic transmission technology and uniformly pushes CPT cone attached with electric resistance strain chip to the soil. The electric resistance strain chip will transduce the resistance between the cone and the soil layer to electrical signal which will be transmitted to data acquisition system for reading, recording and confirming the mechanical parameters of foundation design.Novel and compact design, small size with high power -- all in crawler type CPT vehicle the features of which are as set forth below:1.By using this vehicle, operating CPT test in severe environment (such as beach, river bank, sand field, paddy field, etc) becomes so easy. Driving on icy roads also won't be a problem.2.Advanced hydraulic system: with direction-controlling combination multi-way valve, it is compact, small and easy to install.3.Unique hydraulic anchoring device: high-power motor directly runs the screw mandrel to anchor which is handy and time-saving.4.Gliding rod case: while penetrating, it can be glided out effortlessly. This could enlarge the working space and make loading and unloading convenient. Also it can be pulled back easily while the vehicle's walking.5.This vehicle is ideal not only for CPT test but also other in situ tests, with corresponding attachments and accessories, like CPTu test, PMT, DMT, VCT, WVT, etc. TPC-3VIt is not only just the lightest CPT machine, but also vane shear test machine (i.e. VST). Its rated penetration force is 30KN (3t) and the test depth is up to 30m (in soft soil area). While doing CPT test, it could work with 10cm2 probe, also 10cm2 pore-pressure probe while doing CPTu test. This machine is manual operation, suitable for clay, silt, sand, etc. After over 20 years application and development, now it is improved to put up a perfect performance.his machine is manual operation, suitable for clay, silt, sand, etc. After over 20 years application and development, now it is improved to put up a perfect performance.Vane shear test ranges: 0 ~130KPa,Cross Board To Board head configuration: 50×100 (mm) (general) or 75×150 (mm) 75×100 (mm) (special).The data acquisition instrument and probesneed to be ordered separately.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...