IPDB › China Industry › Instruments & Meters
China, Chinese Belt Scale Micro-Tech 9101 9105 Ramsey1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Weighing Measuring ApparatusWeight IndicatorBelt Scale Micro-Tech 9101Micro-Tech Mt9105 Weighing Controller
Ramsey Electric (Beijing) Co., Ltd.
Preview:
Product Description Ethernet TCP/IP.Profibus-DP boarRS232C/RS-485 Modbus RTUAllen-Bradley DF1Product Description:The Micro-Tech has many hardware and software features. The standardfeatures of the Micro-Tech are listed below.Menu-driven scroll entries on a four line display.Four LED status indicators.Audit trail.Automatic zero and span calibration.Auto zero tracking. (Where applicable)Several software options that may be turned on by keypad entry orby installing optional plug-in PC boards.Optically coupled digital inputs and outputs.Alarms and failure detection.Communication standards such as RS232C, RS485, and networking multi-drop.Allen-Bradley DF1 and Modbus RTU.Ethernet/IP and Modbus/TCPInputs and OutputsThe standard Micro-Tech configuration is as follows. For moreinformation about the Micro specific model reference manual -Tech's communication protocols, see . the USB port.Two serial communication ports.Two digital inputs on the Motherboard.One DC output from the mother board (J29).Four circuit board expansion slots that can accommodate thefollowing boards, if needed.Three programmable digital inputs on plug-in card.Four programmable digital outputs on a plug-in card.Single channel current output boardDual channel current output, analog input board (2 analog in and2 analog out)8 digital inputs/8 digital outputs boardSerial communication boardMicro-Tech Menus and Functions Each capable of performing all of the necessary measuring functions. All of Micro-Tech has been designed for a specific application and isthe required functions are resident in the software of the microprocessor.Optional functions are automatically turned on when the relevanthardware is installed, or after the operator has selected them through thekeypad. Setup of the Micro-Tech is easy and is performed from thekeypad on the front of the device. The setup parameters may be dividedinto the following main groups.Menu 1: CalibrationMenu 2: Set-upMenus 3-6: Options set-upMonitoring FunctionsThe Integrator includes internal diagnostics that generate alarms in caseof hardware failures or programming errors.Alarms are visible on the display and can be acknowledged and resetthrough keyboard, digital input or serial line. Alarms can be delayed toavoid intervention in case of short time peaks. You can program eachindividual alarm to operate as a simple alarm, a shut down function, orthe alarm can be ignored. Two LED's indicate the cumulative status ofalarms and shut-down. Digital outputs are also provided for thefollowing:Hardware failureAlarm cumulativeShut down cumulativePrint Functions Timed or command prints can be obtained by connecting a serial printerto the Comm output on the motherboard, or an optional communicationboard. Data may also be downloaded to a USB memory device. Timeand date are permanently stored in the battery-backed memory. Theintegrator Set-Up, Totals, Zero results, and Audit Trail of the instrumentcan be printed.FunctionsThere are two communication ports on the Motherboard. Comm A isRS232C/RS-485 (jumper selectable), isolated. Comm B is RS-485 only,non-isolated. One additional communication board may be installed. Fordetailed descriptions of communication protocols, see the specific modelreference manual.There are three types of standard communication functions, as describedbelow.Serial CommunicationsThe communication protocol allows a remote intelligent device toread the contents of the registers and write to some registers. Duringthe communication activity, the Micro-Tech always acts as a Slave,meaning it responds to a request from a Master device on the line,but never attempts to send messages out. One electrical interfacemay be selected and accessed through one communication port.Field Bus I/OProfibus-DP I/O communication protocol board is typically used totransfer I/O images between a main PLC and the remote devices(normally remote I/O racks-rack adapters) or to transfer (read andwrite blocks of data with intelligent remote devices (node adapters),the Micro-Tech in this case. The Remote I/O is a typicalmaster/slave communication where the main PLC is the master orscanner and the remote devices are slaves or adapters.Ethernet PortThe Micro-Tech has a built-in Ethernet port. Communicationsprotocols Ethernet/IP and Modbus/TCP can be used. The Micro Tech is a Slave device only, and cannot initiate messages.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...