IPDB › China Industry › Instruments & Meters
China, Chinese 3986 Series High-Sensitivity Reception and High-Precision Measurement Performance Noise Figure Analyzer1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Meter for ElectricityOther Meters for ElectricityNoise Figure AnalyzerWide Frequency Coverage
Chengdu Hf Future Technology Co., Ltd.
Preview:
Product Description Product Description3986 Series Noise Figure Analyzers include 3986A (10 MHz~4 GHz), 3986D (10 MHz~18 GHz), 3986E (10 MHz~26.5 GHz), 3986F (10 MHz~40 GHz) and 3986H (10 MHz~50 GHz). Features of the product include wide-range frequency coverage, high-sensitivity reception, friendly user interface, big screen dual channel HD display, various external interfaces, and dual noise source drive etc. It can measure the noise figure and gain of amplifiers, up converters and down converters, as well as to support automatic measurement of noise figure of multi-stage converters. Guide interfaces are intuitive for setting measurement modes. The comprehensive loss compensation function can compensate loss induced in measurement channel before and/or after the device under test by means of fixed or table forms. The built-in noise figure measurement uncertainty calculator does quantitative analysis of the uncertainty of measurement noise figure. Limit line function that provides test passed/failed notification simplifies the determination of passed/failed test. User friendly features make it easy for engineering technicians to set measurements correctly, to observe and save measurement results in different forms. They can be widely used in R&D, manufacturing, testing and technical assurance tests of electronic equipment for communication etc. FEATURESWide frequency coverage High-sensitivity reception and high-precision measurement performance English operation interface, big screen dual channel HD display Amplifier, Up converter and down converter measurement mode Single sideband and double sideband measurement function Detailed PhotosProduct ParameterssMajor Technical Specifications Frequency Range10 MHz~4 GHz/18 GHz/26.5 GHz/40 GHz/50 GHzAccuracy of Frequency Reference±<0.2ppm (23°C±3°C)Accuracy of Frequency Tuning±< (Reference frequency error +100 kHz) 10 MHz~4 GHz±< (Reference frequency error +400 kHz) 4 GHz~18/26.5/40/50 GHzNoise Figure Measurement Range0~30 dB (ENR: 12 dB~17 dB)Noise Figure Measurement Uncertainty±<0.1 dBGain Measurement Range-20 dB~+40 dBGain Measurement Uncertainty±<0.17 dBInput VSWR<1.90: 1 10 MHz≤f≤4 GHz<2.10: 1 4 GHz<f≤18 GHz<2.40: 1 18 GHz<f≤26.5 GHz<2.40: 1 26.5 GHz<f≤40 GHz<2.40: 1 40 GHz<f≤50 GHzInstrument's own Noise Figure<8.0 dB 10 MHz≤f≤4 GHz<7.5 dB 4 GHz<f≤18 GHz<8.0 dB 18 GHz<f≤26.5 GHz<10.0 dB 26.5 GHz<f≤40 GHz<12.0 dB 40 GHz<f≤50 GHzJitter (uneven)<0.17 dB (Y Factor Typical Value 5 dB)Noise source drive voltage<1.0 V Noise source off+28.0±0.10 V Noise source on General Technical SpecificationsTemperature RangeOperation: 0~+40°CStorage: -40~+70°CAltitude Range4, 600 metersElectromagnetic compatibilityComply with the following requirements of GJB 3947A-2009 provision 3.9.2:a) Conducted emission through CE102 power cable;b) Conducted susceptibility of CS101 power cable;c) Conducted susceptibility injected by CS114 harness;d) Radiated emission through RE102 electric field;e) Radiated susceptibility through RS103 electric field.SafetyComply with safety certificate requirements of GJB 3947A-2009 provision 3.10.a) The resistance between power input end and the chassis (power switch on engaged position) shall be no less than100 MΩ under standard atmosphere pressure and no less than 2 MΩ in damp environment.b) Apply 1500 VAC between the power input end and the chassis. And no symptom like breakdown, flash-over and flicker shall happen.c) In operation, leakage current between chassis and ground shall be no more than 3.5 mA.Power requirementsVoltage and frequency (nominal value)220 V, 50 Hz;(99~121) Vrms, (50~60/440) Hz(198~242) Vrms, (50~60) HzPower consumptionMax. power consumption: 250 WMax. standby: 20 WMonitor1280×800, XGA10.1"Data storage160 G solid state diskSupport USB 2.0 standard storage unitsWeightNet weight: less than23 kg;Packaged shipping weight: 34 kg nominal valueSizeWidth×Height×Depth (mm)=426×177×460 (handle, bottom, pad and side strap excluded), allowed tolerance ±10 mm.Width×Height×Depth (mm)=510×190×534 (handle, bottom, pad and side strap included), allowed tolerance ±10 mm.Warranty3986 Series Noise Figure Analyzers are under a standard warranty of 18 months.ReliabilityMTBF (θ0) ≥5000 hCalibration intervalA calibration interval of one year is recommended. Calibration service shall be provided by professional calibration institutions.Packaging & Shipping Company Profile
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...