IPDB › China Industry › Instruments & Meters
China, Chinese 640X512@12μ M Imaging Min612 Long-Wave Infrared Camera, Mimicking Infrared Movement1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
SensorInfrared SensorMimicking Infrared MovementInfrared ImagingFpv Imaging
Yantai Botu Automation Technology Co., Ltd
Preview:
Product DescriptionModelMIN612/RIR Detector PerformanceSensitive MaterialVanadium OxideResolution640×512Pixel Pitch12μmSpectral Range8μm ~14μmTypical NETD≤40mImage ProcessingFrame Rate25Hz/30HzStart-up Time5sAnalog VideoPAL/NTSCDigital VideoRAW/YUV/BT656Image AlgorithmNon-uniformity Correction (NUC)3D Noise Reduction (3DNR)2D Noise Reduction (DNS)Dynamic Range Compression (DRC)Edge Enhancement (EE)Digital Zoom1~8X Continual Zoom, Step Size 1/8 (YUV Output)Image DisplayBlack Hot/White Hot/Pseudo ColorPC SoftwareICC SoftwareModule Control & Video DisplayElectrical SpecificationsStandard External Interface50Pin_HRS: DF40C-50DP-0.4V(51), (HRS, Male)USB Expansion BoardType-CCommunication InterfaceTTL-232/USB2.0Digital Video InterfaceCMOS8/CMOS16/LVDS/USB2.0Supply Voltage4~5.5VTypical Power Consumption0.9WTemperature MeasurementOperating Temperature Range-10oC~+50oCTemperature Measurement Range-20oC~150oC, 0oC~550oC (Support Expansion & Customization)Temperature Measurement AccuracyGreater of ±3oC or ±3%Regional Temperature MeasurementSupport Maximum, Minimum and Average Value of the Output Regional TemperatureSDKWindows/Linux/ARM; Achieve Video Stream Analysis and Conversion from Gray to TemperaturePhysical CharacteristicsSize (mm)25.4×25.4×27.4 (With 9.1mm Lens)25.4×25.4×39.5 (With 13mm Lens)25.4×25.4×38.3 (With 19mm Lens)Weight27g±2g (With 9.1mm Lens)40g±2g (With 13mm Lens)41g±2g (With 19mm Lens)Environmental AdaptabilityOperation Temperature-40°C ~ +70°CStorage Temperature-45°C ~ +85°CHumidity5%~95%, non-condensingVibrationRandom Vibration 5.35grms, 3 AxisShockHalf-sine Wave, 40g/11ms, 3 Axis 6 DirectionCertificateROHS2.0/REACHOpticsOptional LensFixed Focus Athermal: 9.1mm/13mm/19mmProtection LevelIP67 Rating (Front Surface)FAQ1.What is infrared thermal imaging?Infrared thermal imaging is a method of using infrared radiation and thermal energy to gather information about objects, in order to formulate images of them, or get temperature information of the objects, even in low visibility environments.2.What is thermography?Thermography is a non-invasive diagnostic method, based on object surface temperature detection. The infrared (IR) radiation emitted from an object is recorded and visualised in the form of a temperature distribution map. The infrared thermal image can be used to determine; structural defects, electrical faults, mechanical faults, physiological changes in people & animals, and much more.3.What is the advantage of infrared thermal imaging?---See through total darkness;---Identification under camouflage;---Long range detection;---Heat distribution detection;---Non-contact temperature measurement;---Occupation awareness4.What is infrared detector/thermal imaging sensor?Infrared waves cannot be seen with the human eye. Infrared detector/thermal imaging sensor is an optical-electrical device to react to infrared radiation and thermal energy and convert it into electrical signal and then output visible thermal images.5.What is the difference between uncooled and cooled IR detectors?There are currently two types of infrared thermal imaging sensors on the market, cooled and uncooled.Uncooled IR detectors operate at ambient temperature. It is based on semi-conductor industry and thus usually can be fabricated in big volume with small size and low cost. Uncooled IR detectors are widely used in portable/handheld/mobile devices.Cooled IR detectors are packaged in a unit that keeps them at an extremely low temperature which shall be supported by a cyrocooler. They are much bigger, more expensive and less reliable than uncooled sensors, mainly due to the complex cooling systems they require. However, the cooled systems are incredibly sensitive and usually work with long focal length optics to achive long range mission.knowing the conditions in which the IR detectors will be used is crucial to making the right choice.6.What is thermal imaging module?A thermal imaging module usually consists of an infrared detector, infrared lens and hardware electronics with software and algorithm embeded. It is the minimum unit of a thermal imaging device.7.What is NETD?NETD referrs to "Noise Equivalent Temperature Difference". It is a measure for how well a thermal imaging detector is able to distinguish between very small differences in thermal radiation in the image. NETD is typically being expressed in milli-Kelvin (m K). Usually the lower the NETD figure is , the higher the thermal sensitivity indicates.8.What is SWaP3?SWaP3 refers to size, weight, power, performance and price. It indicates the technology trend of infrared industry.9.What is DRI?DRI usually refers detection, recognition and indentification distance of a thermal imaging system. It is a crutial parameter to judge the performance of the thermal imaging system. 10.What is WLP? What's the advantage of WLP?WLP refers to wafer level package. Together with metal package, ceramic package, they are the 3 main package formats of uncooled infrared detectors. Wafer level packaging (WLP) is the process of completing high vacuum packaging directly on the entire MEMS wafer, then scribing and cutting to make a single infrared detector. WLP IR detectors are just designed to meet the miniaturization and low cost requirement in the application of infrared technology to consumer electronics market. Guide Infrared, with volume fabrication capability, is now offering a variety of WLP infrared module solutions to boost more new applications of emerging markets.11.What are the key considerations on an infrared detector/module for your application?---The detector resolution---The pixel size---The NETD---The image quality---The lens options---The power consumption---The size and weight---The mechanical & electrical interface---The budget
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...