IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese Ultra High Power 9000W Immersion Heater with Dual Thermostat Control1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Water Heater ComponentsSolar Water Heater9000W Immersion RodsDual Thermostat Heating Rods
JPCI Controls (Foshan Gaoming) Co.,Ltd
Preview:
Product Description Main applications: Industrial liquid heating, hot water circuits, containers and buffer tanks, in applications where the heating elements immersed length must be as short as possible.They can be fitted with one or two. They have in standard one 32A res relay, 3 pole, two pilot lights and one main switch.They are intended for indoor use.These enclosures have a 40mm offset to go through tank thermal insulation.- 5 standard power levels: 1,5kW; 3kW; 4,5kW; 6kW; 9kW.On request, it is possible to reach 21kW by increasing the L length).- 2 types of standard fittings: 2"1/2; M77x2.- 2 types of surface load density: 5W/cm2 and 10W/cm2. See technical introduction to optimize the surface load.Heater tube material: 8mm dia. AISI 304 or Incolloy 800 (AISI 316; AISI 321; Incolloy 825 on request).Fitting material: brass, swiveling on housing, brazed on tubes. Supplied without gasket and without nut. See accessories below.Thread: 2"1/2, or M77x2Enclosure: 130mm × 130mm, 150mm height, black PA66 fiberglass reinforced. Silicone foam gasket. Stainless steel cover screws with locking nuts.Ingress protection class: Water and dust: IP54; shock resistance: IK 8 (with metal cable glands and M25 metal plug).Temperature control: by 30-90°C (85-195°F) bulb and capillary thermostat, with outside knob access. Thermostat shaft has a waterproof gasket. Other temperature ranges available. See options hereunder.Cable gland: M25, PA66. Mounted on a removable board for easier wiring access. A second hole for M25 cable gland is available, closed by a screwed cap.Thermowell: two thermowells in AISI304, dia.10mm × 8.4mm.Heating elements connections: terminals with stainless steel screw, nut and stainless steel washer.Three-phase models are equipped with straps for switching to single-phase supply. This change must be made by the professional technical staff able to calculate and observe the maximum permissible rating on power relay.Power supply connection: on built in connection block, 6 × 10mm2 for power connection and 2 × 2.5mm2 for remote safety device or remote control.Not heating immersed zone: 50mm.Surface load: standard 5W/cm2 or 10W/cm2, other values on request.Voltage: Single pole 230V or three phases 380-400V (Star connection with neutral).Standard equipment:- Thermostat with outside knob.- Main power switch.- Large size (dia. 16mm) green and red LED pilot lights.- On models with manual reset: reset access by M25 screwed cap, preset at 100°C (212°F).Variants on request: - Thermostat adjustment access under the screwed M25 cap.- Thermostat without limiter, ranges 4-40°C (40-105°F), 0-60°C (30-140°F) or 30-110°C (85-230°F) Higher range on request.- 4-40°C (40-105°F) temperature range with manual reset at 60°C (140°F)- 0-60°C (32-140°F) temperature range with manual reset at 80°C (176°F)- 30-110°C (85-230°F) temperature range with manual reset at 130°C (266°F)- Thermal cut out (TCO) located inside immersion heater pocket.- 400V power supply without neutral: consult us. ExhibitionsCompany ProfileJPCI Controls originated from the French family-owned company founded in 1972, our company was founded in 2000, headquartered in Gaoming District, Foshan City, Guangdong Province, China, which is specialized in the design and production of mechanical thermostats, safety devices and electric heating systems for domestic and industrial use. JPCI owns an internationally renowned brand, ULTIMHEAT, and has a subsidiary in Lyon, France.After more than 50 years of development, JPCI has become a research and development enterprise which is deeply exploring the international market. JPCI Controls covers an area of 30,000 square meters, has more than 300 employees, including 30 professional R & D and laboratory employees, and produces more than 6 million products per year, with more than 10,000 product models. Our production has achieved full vertical integration to ensure quality control at each stage, our company has more than 1000 sets of testing equipment such as ultraviolet aging testing machine, motor loading machine, hydraulic hi-pot bursting testing machine to strictly monitor product quality. JPCI Controls has always adhered to the values of innovation, listening, responding and continuous improvement to ensure that products can achieve the best quality. JPCI holds 250 patents and applies for an average of 20 patents per year. Won the national high-tech enterprises and passed the system certification ISO9001, ISO14001, ISO45001; It has a 750 self-built laboratory and has passed the ISO17025 laboratory certification of TUV&UL. JPCI Controls is driven by innovation, guaranteed by quality, and takes environmental protection as its responsibilitylooking forward to working with you to create a better future.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...