IPDB › China Industry › Industrial Equipment & Components
China, Chinese Professional Production Composite Fiber Ceramic Fiber CF-1025 for Manufacturing Brake Lining and Brake Pads1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Heat Insulation MaterialRock WoolCeramic FiberFriction Material
Shijiazhuang Deyoute New Material Technology Co., Ltd.
Preview:
Product Description Ceramic fiber(CF-1010 ,CF-1020,CF-1025,CF-1035) Aluminum silicate fiber, raw materials to kaolin, coke gem, pyrophyllite and other high aluminum content of silicate ore as raw materials, silicon dioxide and alumina content is more than 96%.Chemical composition :SiO2 Al2O3Fe2O3 Na2O+K2O45%-55%40-50%0.8%-1.0%0.2%-0.5%Characteristics and applications:It has low heat conductivity, thermal stability, chemical stability, and no causticity. Brake linings made from ceramic fiber have high temperature resistance and decentrality, can be used in brake linings which requires high temperature resistance and heat recovery capacity, it also can be used in all types if mixerRecommendatory dosage:Brake drum: 20-35%Brake disc: 10-25%Technology Indicators: CERAMIC FIBER(CF-1025):ProjectIndex(%)The average fiber length0.15--2.5mmThe average fiber diameter4-9umFiber distributionD50Specific Gravity0.25-0.45g/m3Fiber moisture≤1.0Fiber diameter2-4umFiber loss-on-ignition<0.5,(800/H)Softening Point>1750TemperaturePH7Fiber Asbestos Content0Shot Content;>120mesh<20Surface density(state of compression)0.13-0.20g/ cm3 Ceramic Fiber(CF-1010)ProjectIndex(%)The average fiber length0--1mmThe average fiber diameter4-9umFiber distributionD50Specific Gravity0.45-0.55g/m3Fiber moisture≤1.5Fiber diameter2-4umFiber loss-on-ignition<0.5,(800/H)Softening Point>1750TemperaturePH7Fiber Asbestos Content0Shot Content;>120mesh<30Surface density(state of compression)0.25-0.40g/ cm3Ceramic Fiber(CF-1020)ProjectIndex(%)The average fiber length0.10--2.0mmThe average fiber diameter4-9umFiber distributionD50Specific Gravity0.25-0.35g/m3Fiber moisture≤1.0Fiber diameter2-4umFiber loss-on-ignition<0.5,(800/H)Softening Point>1750TemperaturePH7Fiber Asbestos Content0Shot Content;>120mesh<25Surface density(state of compression)0.25-0.35g/ cm3Package: 25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped . Storage:Ceramic Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.Industrial Safety and Environment Protection: Risk of explosion by static sparks or ignition sources Use only explosion -proof equipment . Use with local exhaust ventilation.Wear protective eyeglasses or chemical safety goggles .A safety data sheet will be made available on request: This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.Composite fibre:Non-Asbestos Composite Mineral Synthetic Fibre(Composite Fiber)Product Model: CF-1035,CF-1025The fiber is made of mineral fiber, organic fiber and surface treatment agent. Length 1.0-3.5mm, the fiber has good dispersion, suitable for mixing with all kinds of mixer. Using this product cold type effect is good, especially suitable for cold type two step brake lining production process, use this product do not need to add organic fiber.Technical Indicators:ProjectIndicatorsSpecific Gravity2.25g/cm3Fiber length 1.0-3.5mmLoose density800-1100 cm3/100g105oC Volatiles<2.5%Slag ball Content>120mesh; < 2%800oC Burn loss28-32%Fiber diameter3-8μmP H8-10Main ingredientsMineral Fiber 70% Cellulose Fiber 30%Package: 25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .Storage:Mineral Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.Industrial Safety and Environment Protection: Risk of explosion by static sparks or ignition sources Use only explosion -proof equipment . Use with local exhaust ventilation.Wear protective eyeglasses or chemical safety goggles .A safety data sheet will be made available on request: This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale. Crushed steel wool: mainly used for automotive brake pads and other friction materials;Cut steel cotton fiber: can be used in construction concrete and other fields;Steel wool long fiber: mainly used for civilian daily washing and industrial rust removal, decontamination, polishing, etc. Steel wool can also be used in powder metallurgy, refractory materials, conductive plastic products and other fields.STEEL WOOL FIBER Technical Information SheetGeneral Steel wool Fiber is a new type of metal fiber material, the fiber is up to 4μm, the natural state of similar to fluffy cotton. Crushed steel wool mainly used for brake pads and other friction materials.2. Chemical Composition: CSiMnSP 0.07-0.12 0.07MAX 0.8-1.25 0.03MAX 0.03MAX3. Specification:D0-160, D1-80, AD1-80, 1-80, 3L-80, 3-60, Q4-804. Application: ClassificationSpecificationRange Of ApplicationNote Steel wool FiberD0-160D1-80Brake shoes for motorcycle, car and light truckIt can be produced according to the standards and specifications required by usersAD1-801-80Brake shoes for a midsize car3L-803-60Q4-80Brake shoes for heavy duty vehicles5. Packaging:Using two paper and one plastic composite bag packaging, bag mouth suture seal, 25kg/ bag, can also according to customer requirements.6.Industrial Safety and Environment Protection Risk of explosion by static sparks or ignition sources Use only explosion -proof equipment . Use with local exhaust ventilation. Wear protective eyeglasses or chemical safety goggles .A safety data sheet will be made available on request This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...