IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese 1.2550, AISI S1, 60wcrv8 Cold Work Mould Steel1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Steel ProductsSteel Round BarAISI S160wcrv8 Cold Work Mould SteelCold Work Tool SteelCold Work Mould Steel
Hunan Fushun Metal Co., Ltd.
Preview:
Product Description 1.2550, AISI S1, 60WCrV8 Cold Work SteelSimilar Grade: 1.2550, AISI S1, 60WCrV8 Shape: Round, Flat, Square.Size Range: Diameter(mm)Thickness (mm)Width (mm)Length(mm)Round50-420--2000-5800Square50-420--2000-5800flat-20-5080-6002000-5800 Steel-making Condition: EF, EF/EAF+LF+VD, EF/EAF+ESRDelivery Condition:Annealed , Quenched + TemperedSurface Condition: Black, Grinded, Peeled, Rough turned, PolishedFeatures:1.Competitive price2.Immediate delivery3.Premium quality4.Reliable service5.MOQ: 1 Ton Packing detailsIn seaworthy packing, as your requirement.Delivery detailswithin 30-50 days Chemical Composition: GradeCMnPSSiCrWV1.25500.55-0.650.15-0.450.030 max0.030 max0.70-1.000.90-1.201.70-2.000.10-0.20 Heat Treatment:Forging: Heat the steel carefully to a temperature of 1000-1050°C and forge with light rapid blows. Reheat when temperature falls below 900°C if further work remains to be done. After forging, cool slowly, ideally in a furnace.Annealing: Heat the component slowly and uniformly to 800-810°C. Soak thoroughly for two to three hours and cool slowly in the furnace.Stress reliving: If the machining operations have been severe, we recommend stabilising just before the tool components are finish machined to relieve machining strains. Heat slowly to a temparature of 700°C, allow to cool in air.Hardening: Preheat at 650°C followed by rapid increase of temperature to 900-950°C. Quench in oil. Tempering of this grade is always recommended after hardening.Tempering: Heat slowly to the required tempering temperature, soak thoroughly for two hours per 25mm section and allow to cool in air. For hot work applications, a minimum tempering temperature of 550°C should be used. Applications:Typical applications include mandrel bars for drawing steel tubes, swaging, also punching, piercing, trimming dies and shear blades, forming and gripper dies.Introduction:1.2550 Cold work steel with very good toughness, dimensionally stable, impact resistant, high hardening capacity. Similar with AISI S1. Contact Information:FUSHUN SPECIAL STEEL CO., LTD. Website: fushunmetal.en.made-in-china.com
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...