IPDB › China Industry › Industrial Equipment & Components
China, Chinese Pem Zero Air Purifier for Toc in The Lab 1500 Ml/Min1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Gas Generation Equipment PartsGas Purification GeneratorPem Zero Air Purifier 1500 Ml/Min for Gc-FidFactory Direct Supply Zero Air Purifier for Toc
Shandong Saikesaisi Hydrogen Energy Co., Ltd.
Preview:
Product Description Product introduction: QL-Z1500 Zero Air Purifier is an equipment for purifying air supply. The zero-grade air is produced from compressed air by means of catalytic oxidation. The compressed air is channeled into a heated catalyst bed where the hydrocarbons are converted to carbon dioxide and water vapor, producing zero-grade air with less than 0.05ppm hydrocarbon content (measured as methane). Then eliminate the carbon dioxide and water vapor to get zero-grade air. Working Principles Compressed dry air enters this purifier, and it's oxidized in the stainless steel stove which is full of noble metal catalyst, then get the pure air which hydrocarbon and CO content are less than 0.1ppm. Pure air enters three-level molecular sieve purification, remove the air particles, and finally get dry, pure and zero air.ApplicationGC-FID, GC-NPD, GC-FPD ,GC-TCD ,THC, TOC ,COT, DSC ,TGA, ELSD , which needs zero-grade air supply. Installation and Usage1. Connect compressed air outlet with this equipment inlet, connect gas-applied equipment with this equipment outlet. Screw the nuts carefully for sealing well.2. Connect power supply and turn on the switch. Set working temperature at 350oC. After preheating for 30 minutes, temperature gets the set value, and equipment enters working condition.3. The hydrocarbon in air changes into CO2 and water. After adsorption and purification through molecular sieve, the hydrocarbon in zero air is less than 0.1ppm. After using equipment continuously for 200 hours, the molecular sieve is saturated, and it should be replaced or regenerated. While regenerating, it should be backed for 4 hours under 150-180oC.4. Please switch off the power after using this equipment. Technical parameter ModelQL-Z1500Input hydrocarbon concentration<100ppmOutput hydrocarbon concentration<0.1ppmInput gas flow0-1500ml/minInput power300wInput gas pressure 0-0.6MPaDimension 420*265*365mmInstrument stabilization time (H)<1Surrounding humidity<85%Power supplyAC,220v,50-60HzProduct ImageWe can make customized PEM zero air purifier with the air input flow rate being from 500 ml/min to 3000 ml/min. Please contact me for more info.MonicaShandong Saikesaisi Hydrogen Energy Co.,Ltd
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...