IPDB › China Industry › Instruments & Meters
China, Chinese Portable Water Content Tester Karl Fischer Coulometric Titrator Moisture Analyzer1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Analysis InstrumentMoisture MeterWater Content TesterKarl Fischer Coulometric Titrator
Chongqing Gold Mechanical & Electrical Equipment Co., Ltd.
Preview:
Product Description Portable Water Content Tester Karl Fischer Coulometric Titrator Moisture AnalyzerProduct DescriptionThis device adopts Karl Fischer Coulometric method.It owns advantages of high testing accuracy, good repeatability, low testing cost etc.It is used to accurately test trace water content in various liquid, solid and gases.And it is widely applied to petroleum, chemical engineering, pharmacy, electricity, scientific research, education department and so on.Main technical featuresPowerful new-generation processor; dual-CPU design.Dual power channels separate electrolytic electrode and measuring electrode;Automatically removing all kinds of interference;Greatly improving the accuracy of test results;Measuring electrode data directly A / D sample converting; Data true value avoids errors caused by analog circuit; Results more accurate;Product ParametersNo.Item NameSpecifications1DisplayLCD2Measuring range3ug to 200 mg water3Water content range1ppm-100%4Resolution0.01 ug water5Accuracy10μg~1mg water, ± 0.2%; >1mg water, < ± 0.3% (excluding injection error)6Electrolysis speedmax 2.4 mg/min7Electrolytic current0 ~ 430 mA8Ambient temperature5 ~ 35 oC; Humidity: ≤85%9Power supplyAC 220V ± 10%10Dimension320 × 240 × 180mm11Weightabout 6kgAccessories ListNo.NameQuantity1Main Unit1 Set2Electrolytic cell1 PC3Electrolytic electrode1 PC4Measuring electrode1 PC5Drying pipe1 PC6Gasket10 PCS7Vacuum grease1 Box8Power wire1 PC9Magnetic stirring rod1 PC100.5 Microliter sample injector1 PC1150 Microliter sample injector1 PC12100 Microliter sample injector1 PC131mL sample injector1 PCCleaning and maintenance1. The following phenomena may occur when the electrolytic electrode is contaminated:(1) Reduce the electrolysis efficiency and extend the measurement time.(2) The blank current is increased due to the adhesion of the contaminated portion to absorb moisture.(3) The titration rate is unstable and cannot reach the end point.If the above situation occurs, the surface of the glassware and the dirt on the platinum net can be cleaned with anhydrous ethanol (be careful not to damage the platinum wire and the platinum mesh).2. The electrolysis electrode can be dried by a hair dryer. The core part of the sand is difficult to dry, so it should be thoroughly dried. Pour a little reagent into the electrode and shake it gently. If the reagent turns pale, it means not drying.Detailed Photos Company ProfileContact usContact us for common faults about Portable Water Content Tester Karl Fischer Coulometric Titrator Moisture Analyzer . You are welcome to communicate with us about the special circumstances that arise in the experiment.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...