IPDB › China Industry › Chemicals
China, Chinese Fire Proof Self-Expanding Sealant Single Component PU Foam1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
AdhesivePolyurethane AdhesiveSpray Foam Fire StopPurple PU Foam Stress Ball
Shanghai Junbond Building Material Co., Ltd.
Preview:
Product Description olyurethan Foa JUNBOND V3 PU FOAM is a one-component, economical type and good performance Polyurethane foam. It is fitted with a plastic adapter head for use with a foam application gun or a straw. The foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mounting capacities, high thermal and acoustical insulation. It is environmental friendly as it does not contains any CFC materials.PRODUCT FEATURES Polyurethan Foam1, Low Foam Pressure/Low Expansion - will not warp or deform windows and doors2, Quick Setting Formulation - can be cut or trimmed in less than 1 hour3, Closed Cell Structure does not absorb moisture4, Flexible/Will not crack or dry out APPLICATIONS AREAS Polyurethan Foam1, Application where fire retardant properties are required;2, Installing, fixing and insulating of door and window frames;3, Filling and sealing of gaps, joint, openings and cavities;4, Connecting of insulation materials and roof construction;5, Bonding and mounting;6, Insulating the electrical outlets and water pipes;7, Heat preservation, cold and sound insulation;8, Packaging purpose, wrap the precious & fragile commodity, shake-proof and anti-pressure. APPLICATION INSTRUCTIONS Polyurethan Foam1, Remove the dust, greasy dirt on the surface before construction.2, Spray a little water on construction surface when the humidity is below 50 degrees, otherwise the heartburn or punch phenomenon will appear .3, The flow rate of the foam can be adjusted by the control panel.4, Shake the container for 1 minute before using, connect material container with spray gun or spray pipe, the filler content is 1/2 of the gap.5, Use dedicated cleaning agent to clean the gun Surface drying time is about 5 minutes, and it can be cut after 30 minutes, after 1 hour the foam will be cured and achieve stable in 3-5 hours.6, This product is not UV-proof, so it is suggested to be cut and coated after the foam curing (such as cement mortar, coatings,etc.)7, Construction when temperature is lower than -10 oC, to ensure the material can be exhausted and increase the foam expansion, it should be heated by 40 oC to 50 oC warm waterSAFETY RECOMMENDATION1, Store the product in a dry, cool and atmospheric place with temperature under 45oC.2, The after-use container is forbidden to be burnt or punctured.3, There should be atmospheric condition in construction site, the constructor should wear work gloves and goggles, don't be close to combustion source and don't smoke.4, It is forbidden to invert or side lay in storage and transportation. (long inversion can cause valves blocking5, This product contains micro harmful element, has certain stimulation to eyes, skin and respiratory system, In case the foam sticks to eyes, washing the eyes with clean water immediately or follow the doctor's advice, washing the skin with soap and clean water if touching the skin.BasePolyurethaneConsistencyStable FoamCuring SystemMoisture-curePost-Drying ToxicityNon-toxicEnvironmental hazardsNon-hazardous and non-CFCTack-Free Time (min)7~15Drying TimeDust-free after 7-15 min.Cutting Time (hour)1 (+25oC)8~12 (-10oC)Yield (L)900g45-55LShrinkNonePost ExpansionNoneCellular Structure70~80% closed cellsSpecific Gravity (kg/m3)Density20-32Temperature Resistance-40oC~+80oCApplication Temperature Range-5oC~+35oCColorWhiteFire Class (DIN 4102 )B3Insulation Factor (Mw/m.k)<20Compressive Strength (kPa)>120Tensile Strength (kPa)>30 (10%)Adhesive Strengh(kPa)>130Water Absorption (ML)0.3~8(no epidermis)<0.1(with epidermis)
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...