IPDB › China Industry › Chemicals
China, Chinese Multifunction Pharmaceutical Rotary Drum Flaker for Cooling and Crystallization Process1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Chemical Equipment MachineryOther Chemical Equipment MachineryDrum FlakerCondensing Drum Flaker
JIANGSU SOHO HONRY WUXI CO., LTD.
Preview:
Product Description Basic description of the equipment of the drum type condensing and crystallizing flaker Discription:Drum type condensation crystallization flake is a kind of continuous conduction cooling and drying equipment. On the outer wall of the drum, the material obtains the temperature difference transmitted by water (steam, heat transfer oil) cooling (heat transfer), and then cools (dries) the lamination. In the cooling process, the cooling water (steam, heat transfer oil) is evenly sprayed to the inner wall of the drum by the distribution system, and the temperature of cold water (steam, heat transfer oil) is transferred from the inner wall of the drum to the outer wall of the drum, and then passes through the material film to achieve the purpose of cooling (drying) crystallization. The utility model has the advantages of simple structure, high efficiency and continuous operation, so it is widely used for liquid materials or strip materials. The liquid material completes the whole process of cloth film, scraping and getting products in one rotation cycle of the drum. Therefore, in the operation, the expected product and corresponding output can be obtained by adjusting the feed concentration, film thickness, cooling (heating) medium temperature, drum revolution and other parameters. Due to the structure and operation of the equipment, it is more suitable for paste and viscous materials. Condensing (dry bath) rotary drum laminating machine, the whole equipment is completely closed, double sides are reserved with access doors, sealing strips are closed, the top of the cover is equipped with air conditioning multi pipe air inlet, improving the cooling efficiency and increasing the capacity. The material is placed in the storage tank, and the film is formed by sticking the animal material on the surface of the drum through the rotating belt of the drum. During the rotation of the drum, the material is cooled (dried) and crystallized into flake powder. Then, it is scraped off by the discharging scraper blade, and the material is collected by the spiral conveying, or directly bagged by the discharging hopper. Feeding method adopts the method of down dip or up distribution: down dip is to send the slurry to the dip tank under the barrel, and the drum is immersed in the feed tank. During the rotation process, the material automatically adheres to the barrel surface, and the thickness of the material is adjusted by controlling the immersion depth and the barrel rotation speed. The equipment structure is simple and the main engine power is low. According to the physical properties of materials, it can also be set as upper feeding and back feeding. Upper cloth is a special fabric structure designed for some materials with low cohesion. Complete the condensation (drying) crystallization of different materials.Performance and characteristics of the product:1. There are 3 kinds of feeding methods: up-feeding, back-feeding and down-feeding. For the characteristics of chemical materials, there are single drum type and double drum type.2. There are steam heat preservation, heat-conducting oil circulation heat preservation and electric heating heat preservation in the material tank.3. The equipment is divided into open type and semi-closed type, fully closed type, vacuum type, nitrogen protection type.4. Blade materials are brass, phosphor bronze, nylon, rubber wood, alloy steel saw blade.5. Discharge system has single out, double out and so on.6. Special requirements: the regular shape and size of the material to ensure that the material piece thickness and size uniformity.7. Cooling or (heating) system has a sub-jacketed or spray type, according to the size of the drum flaker machine specifications and the characteristics of the material to be designed to improve the efficiency of heat transfer and increase the strength of the drum and to improve the relative yield of the product.8. The cooling water adopts packing seal or rotary joint, which can reliably prevent water leakage and apply new process to reduce the consumption of cooling water.9. Both ends of the drum are equipped with heat insulation layer and side scraper, no material is formed at both ends of the drum, thus there is no friction power consumption at both ends of the drum, eliminating the problem of unstable start-up due to material formation at the end.1.Inlet 2.Drive section 3.Drum 4.Cooling system 5.Outlet system 6.Scraper system7.Frame 8.Feed tank Equipment featuresPerformance reaches the level of modern foreign equipmentContinuously variable speed, drum speed adjustableSide scrapers are provided to avoid accumulation of material at the side end of the drum.High drum accuracyCompact equipment with small footprintWide range of adaptation, easy and flexible operationSafe and reliable half-pipe jacketed feed traysAdoption of multiple sets of scraper, flexible adjustmentSpray water cooling, good cooling effectMulti-functional, both flaking and drying Scope of applicationclassificationsExamples of materials to be usedorganic categoryAnhydride, paraffin, asphalt, caprolactam, p-nitrochlorobenzene, catechol, p-dichlorobenzene, trimellitic anhydride, m-hydroxyl, 1,8-diaminonaphthalene, diaminodiphenylmethylmethane, N-phenylmaleimide, trimethylolpropane, polydiethanol, octadecanol, polyethylene waxes, polyvinyl acetates, TMPs, paraformaldehydes, dodecahydroxystearic acid, tris-(triphenylene)phosphate (TPP), MS, chloro Methane, etc.inorganicSulphur, alkali sulphide, white blocks, aluminium sulphate, calcium chloride, caustic soda, sodium hydrosulphide, etc.Fine chemicals4010NA, 4020, RD, DTPD and other antioxidants; Aflux, Aktiplest, Z-80, plasticiser A, plasticiser B and other plasticisers, RC series of organic cobalt salts, MOCA, leather treatment auxiliaries, surfactants, plastic auxiliaries, rubber auxiliaries, organic palladium salts, protective waxes, etc.Fats, oils and chemicalsStearic acid and its salts, fatty acids (alcohols) and their salts, glycerin, DMP-100, rosin glycerin, palm oil, etc.resinousPF Resin, Tackifier Resin, Terpene Resin, Rosin Resin, Phenolic Resin, Polymerised Rosin, Epoxy Resin, Polyamide Resin, Petroleum Resin C5-C9.otherOthers Hot melt, emulsion explosives, gelatin, beeswax, sodium fosilicate, thermosetting moulding plastics, rubber and plastic materials, decompression kettle bottom materials, electronic grade materials, MDA, DTPT, nitro compliant fertilizers, nitrogen based compound fertilizers, PP|highly concentrated compound fertilizers, etc.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...