IPDB › China Industry › Instruments & Meters
China, Chinese Lab Nozzle Salt Spray Tester Chamber Machine ASTM B1171 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Test InstrumentEnvironmental Test ChamberSalt Spray Corrosion Testing MachineSalt Spray Tester
CHANGSHA LANGSHUO TECHNOLOGY CO LTD
Preview:
Product Description Lab Nozzle Salt Spray Tester Chamber Machine ASTM B117Use:This machine has a standardized test method to check corrosion resistence of coated samples. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. Different coatings have different behaviour in salt spray test and consequently, test duration will differ from one type of coating to another.Design Standards:ISO 9227,GB/T 2423.17-1993 ,GB/T 2423.18-2000,GB/T 10125-1997,ASTM.B117-97 JIS H8502 ,IEC68-2-11,IEC68-2-52 1996 ,GB.10587-89,CNS.4158,CNS.4159,CASS,GB/T 12967.3-91 CASSLab Nozzle Salt Spray Tester Chamber Machine ASTM B117Specification: Inner size1200×1000×500(L×W×H)mm Outside size1900×1300×1400(L×W×H)mm Test room temperatureNSS ACSS 35oC±1oC/ CASS 50oC±1oCPressure Barrel TemperatureNSS ACSS 47oC±1oC/ CASS 63oC±1oCLaboratory capacity600LSalt water box capacity40LCompressed air pressure1.00±0.01kgf/cm2Volume of spray 1.0-2.0ml/80cm2.hLaboratory relative humidity85%RH aboveLab Nozzle Salt Spray Tester Chamber Machine ASTM B117Character1.Imported gray P.V.C board, special treatment resistant to corrosion.V - shaped frame and stainless steel tube Angle, make sure the test object into 30 degrees Angle, four wheels glide, can push to go.2.Fine workmanship, beautiful appearance, high transparency, pneumatic open cover.3.Automatic/manual water filling system is adopted, with the function of automatic/manual water filling when water level is insufficient.The experiment will not be interrupted to meet the diversified environmental requirements of the guests.(automatic water rehydration only needs to be connected to the water pipe.)4.Nozzle: the spray tower is equipped with a cone disperser, which can guide fog, regulate the amount of fog, and even fog falling.5.Use high-precision multi-function timer and the test time can be set to multi-function. With the power failure memory function, continue to work after the power failure, until the required time is completed, and avoid redoing the experiment after the power failure.6.In the salt spray test, direct steam heating is adopted, the heating speed is fast, the temperature distribution is uniform, and the standby time is shortened.7.Two-key automatic operation.With full trouble warning system.When the fault occurs, the light can be turned on and the buzzer will alarm.8.Two internal fog collecting tubes are used.It is less likely to be damaged than the traditional outer-type.9.With overload short-circuit protection.To prevent the damage of the instrument and its internal electronic control parts.10.The inner and outer box is connected with the seal groove and sealed with water.11.The imported temperature controller USES digital display,PID control,error±0.1oC.12.Temperature range:1:Test room temperature:35oC--Pressure barrel temperature:50oC(can set) 2:Test room temperature:47oC--Pressure barrel temperature:63oC(can set)13.The refill bottle is made of recessed water level window, which is easy to clean.14.Heat speed:1:Test room,RT---→35oC About 35minutes 2:Pressure barrel,RT---→47oC About 15minutes15.Temperature accuracy:±1oC16International standard:RELATEU STANDARDS CNS 3627,3885,4159,7669,8866; JIS D-0201,H-8502,H-8610,K-5400,Z-2371,ISO3768,3769,3770; ASTM B-117,ASTM B-268 B-268,GB-T2423,GJB150.Lab Nozzle Salt Spray Tester Chamber Machine ASTM B117Control panel and electrical accessories: Temperature controller(Zhejiang dahua) 2pcsPressure gauge(Japan KKK) 1pcsIndicator light(Taiwan)5pcsTimer(DHC) 1pcsController switch(Taiwan) 2pcsSSR (Taiwan yangming) 2pcsRelay(Japan OMRON) 1pcsTemperature sensor(taiwan shenjie) 2pcs Pressure regulating valve(Japan SMC) 2pcsSolenoid valve(Japan OMRON) 4pcsAccessories inside chamber Spray tower2setSample shelf10pcsSample putting rods14pcsStandard measuring cylinder2pcs Temperature pointer2pcs Collector 2pcs Glass nozzles2pcsDefog system1group Accessory:NacI 2bottle,Measuring cup1pcs,Operation manual 1pcs,quality certificate,1pcs.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...