IPDB › China Industry › Chemicals
China, Chinese PE Heat Shrinkable Sleeve Wholesale Pipe Joint Materials1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Plastic ProductsPlastic Strap TapeHeat Shrinkable TubePE Sleeve
Qingdao Huashida Machinery Co., Ltd.
Preview:
Product Description Product Description Wholesale pipe joint materialsHeat Shrinkable Sleeve Insulation Connector1. HSSC-1 Heat shrinkable sleeve (2 layers), which are developed and manufacture by Qingdao Huashida machinery Co., Ltd for anti-corrosion of pipeline, are the composition of radiation cross-linked polyethylene backing and high shearing strengthen melt adhesive, and have the function of shape memory. The hot melt adhesive is squeezed into the joint by the shrink power to form a perfectly sealed surface, after being heated. HSSC-1 is compatible with standard pipe coating, also can be used for coating bare, replacement pipe section and large radius bends. The system is designed to be applied with minimum preheating and is ideal for large diameter wastewater pipeFeature1.Fast shrinkage speed,2.good waterproof performance,3 good anti-corrosive performance,4.long service life, convenient transportation and fast construction.Application scopeThe heat shrinkable sleeve is designed to be applied with minimum preheating and is ideal for large diameter wastewater pipe. 3PE pipe and pre-insulated pipeline joint closure. ITEMStandardUNITDataAdhesivesoftening pointASTM E 28°C70-80shear strengthDIN 30 672N/cm≥100Basicspecific densityASTM D792r/cm 30.935-0.96tensile strengthASTM D638Mpa15-20Elongation at breakASTM D792%350hardnessASTM D2240ball48Heat Shrinkable Sleevepeel strengthASTM D1000N/cm>150water-intake rateASTM D570%0.052. 3Layer Fiber reinforced PE heat shrinkable tape (sleeve) is composed of cross-linked polyethylene back, a middle layer of fiber and special heat melt adhesive an. The 3 layer reinforced sleeve gives better shrink ratio, and better strength. It is resistant to corrosion, wear, impact, UV and aging, easier to be operated.Application area:It is mainly used for Hollow wall spiral pipe, corrugated pipe and metal reinforced corrugated spiral pipe etc.TEST PROCEDURE1. Clean the steel pipe and heat it by fire till over 80 oC2. Paint the steel pipe with Primer (mixed with A&B)3. Fire heat the heat shrink sleeve, be attention to start heating from middle of the sleeve, but act from up and down, and gradually move from middle to two sides of sleeve, in order to drive air out of the sleeve, after finish heating, the good result is that there is about 1-2mm hot adhesive melt at the edge of sleeve.TEST RESULT1. Test result after cooling about 40 minutes. Peel strength to primer is over 100N per 2cm(till the end of the spring balance). at 30.7oC Co-adhesive: Half-half. 2. Test result after cooling about 24hours. Peel strength to primer is over 172N per 2cm at room temperature about 30.7oC Co-adhesive: Half-half. 3. 2. Test result after cooling about 24hours. Peel strength to primer is over 9.2kg/90N per 1cm at room temperature about 30.7oC Co-adhesive: Half-half. Company ProfileQingdao Huashida Machinery Co., Ltd is one of the top manufacturers of plastic extrusion machines in China, specialized in dealing with Steel pipe in terms of anticorrosion and insulation technology, R&D of the coating technique, design and manufacture of the equipment for coating, products and materials, researching and development of plastic extrusion equipments, especially of Vacuum Calibrating method PE insulation jacket pipe extrusion line, and PE hollow wall spiral pipe production line, PE PP sheet extrusion line, and pipe joints and welding tools such as heat shrinkable sleeve, Electro fusion sleeve etc.Up to now, We have successfully entered the oversea markets of Russia, Iran, UAE, India, Belarus, Kazakhstan and son on. Our pipeline production line is nearly 50sets at home and abroad.HUASHIDA Factory located in Qingdao High & New Technology Industrial Area- Qingdao Huashida industrial Park, covers an area of about 4000 square meters. We have obtained more than 10patents and many industry certifications at home and abroad. HUASHIDA company has high qualified and experienced teams for reaching& designing, manufacturing and site operation.We have reliable products of different models because of our powerful making capacity. We can satisfy our customer's special need because of our outstanding R&D and design capacity. We can offer our user with timely and convenient techniqual support because of our perfect after-sales service.International Trading showClients caseCertifications
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...