IPDB › China Industry › Industrial Equipment & Components
China, Chinese 230 000 Gallon Bolted Steel Drinking Water Tank with NSF61 Certification1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Environment Protection DeviceWater TankWater Storage TanksWater Tanks
Hebei Wansheng Environmental Protection Engineering Co., Ltd.
Preview:
Product Description What is Glass fused to steel tanks? GFS bolted tank is made of glass fused to steel plate, special sealing material, self-locking screw and other materials. The thickness of enamel steel plate can reach to 20 mm, the most used steel plate thickness is 3~10 mm, steel plate has surface oil, contain rust, contain oxide skin, after shot blasting, sand and other pretreatment process, the steel plate surface will be clean. After 900 oChigh temperature second enamelingl in electric furnace ,0.3 mm enamel coating is applied on both sides of steel plate. strong binding force between enamel coating and steel plate. Enamel coating can not only prevent tank corrosion, but also has the function of strong acid and alkali resistance. And has extremely strong wear resistance.Glass-fused-to-steel Tank refer to glass-lined storage tanks, also known as some GFS storage tanks.Glass is melted with steel to enhance its performance.Fusion is important because it is single steel, and it is the same for the environment.When the fusion of steel and glass is completed, the strength increases and the wear resistance decreases, as does the suitable pH value scaffold for alkaline solution.Such ponds are generally considered to be one of the important components of environmental technologies, such as anaerobic digestion tanks, wastewater treatment and fireproof storage.They are industrial water storage tanks.The glass fused on the stainless steel tank panel is coated with glass enamel inside and outside.The enamel has a strong, bright, smooth silicate coating.GFS tank has very good anti-corrosion performance, extremely strong acid and alkali resistance, PH1-14 applicable, beautiful and elegant appearance, convenient for later maintenance. It is widely used in biogas engineering, biomass natural gas engineering, animal husbandry sewage, industrial wastewater, etc. It is suitable for each treatment process such as CSTR, USR, UASB, A/O, integrated device, etc.Glass Fused-To-Steel Water Storage Tanks Specifications Coating colorDark blue, Dark green , White, and customizedA standard steel plate sizeeffective size 2400mm x 1200 mSteel plates thickness3mm - 12mm , depends on the diameter & heightCoating thickness0.25mm - 0.4mm, two coating internal and externalAcid and alkalinity proofstandard coating suits for PH3 - PH11, special coating suits for PH1 - PH14Adhesion3,450N/cmElasticsame as steel sheet , around 500KN/mmHardness6.0 MohsService life>30 yearsSpark/Holiday test>1500 VPermeabilitygas and liquid impermeableEasy yo cleansmooth, glossy, inert, anti-adhesionCorrosion resistanceexcellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds Glass Fused-To-Steel Tank Applications:There Are Several Advantages to Using a GFS Bolted Tank: Advantages of GFS bolted tanksCompared with concrete or carbon steel welded tanks, the advantages of GFS Steel bolted tanks are listed below: Low CostThe installation, disassembly, migration, and resettlement of GFS bolted Tanks are convenient and fast, and do not require a large amount of labor and large installation equipment. The quality is stable and the corrosion resistance is excellent, so the maintenance cost is very low. Carbon steel welded tanks and concrete tanks are installed on-site and usually involve sealing and waterproofing, long installation intervals, and the installation process are easily delayed due to bad weather (such as rain or wind), resulting in high installation costs. In some cities, there may be restrictions on the use of sealants, resulting in delays or high installation costs. GFS tanks are more convenient and environmentally friendly without on-site finishing. Superior Corrosion ResistanceAfter the enamel steel plate is sintered at a high temperature of 820°-930°, the enamel will fuse with the surface of the steel plate to form a strong chemically inert inorganic coating, which has superior corrosion resistance. Short Construction PeriodThe Glass-Fused-to-Steel is standardized in the factory and is packaged and transported to the construction site for assembly. The steel plate is spliced by a bolt connection and has special installation tools for installation. The installation process is less affected by the weather and the installation cycle is easy to control. Freely ExpandableCompared with concrete or carbon steel welded tanks, the GFS tank has unmatched expandability. If it is necessary to expand the tank capacity in the future, the GFS tank can be easily expanded with minimal material and labor input. Since the Glass-Fused-to-Steel bolted tanks are constructed of modular enamel steel, only more enamel steel is needed and the time to reconfigure and expand existing tanks is required. Beautiful AppearanceThe surface of Glass-Fused-to-Steel bolted tanks is smooth and sleek, the standard color is dark blue, bright and beautiful, and any other colors can be customized according to the user's requirements. Comparison of GFSTank and other tanks ItemConcrete TankCarbon steel tankGFS TanksLIPP tankBeautiful degreeLowLowHighHighTemperature adaptionA stressAdapt to low temperatureAdapt to low temperatureAdapt to low temperatureShapeAny shapeRound shapeRound shapeRound shapeGround Or undergroundBothGroundBothGroundCorrosion resistanceNormalNo resistance to corrosionGoodNotAbrasion resistanceGoodBadGoodBadEasy to cleanBadBadGoodNormalEasy to repairNormalGoodGoodBadWeight (T)HeavyLittle heavyLightLittle lightTank costMiddleHighLowLowTank temperature protectNoNeedNeedNeedAnti-corrosive TreatmentNoNeedNoNeedAnnual anti-corrosive costNoHigh costNoHigh costCorrosion resistanceNormalNoSuperiorNormalAbrasion resistanceGoodBadGoodBadService life30103025 Glass Fused-To-Steel Tanks production procedure: Roofs option:1.Glass-Fused-to-Steel-Roofair-tightness,often utilized for pressurized structures and provide a suitableoption for odour controlcone shape roof with external / internal beamsviable solution for demanding applications2. Aluminum Alloy Trough Deck Roof. economical option for potable water, waste water, and firewater storage etc.. keep out rain and wind, odour control.without air-tightness3. Aluminum Geodesic Dome Roofself-support without support columnswithout air-tightness4. Double Membrane Roofsuperior option for anaerobic digestion processes andbiogas applicationsair tightness, utilized for biogas collection and odour controlintegrated AD tank with the cover on top, cost effectiveAbout our factory
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...