IPDB › China Industry › Packaging & Printing

China, Chinese 200m/Min High Quality 6colors Computer Register Automatic Rotogravure Printing Machine¹ Industrial Products Supplier Manufacturer Details, price list catalog:

China Industrial Products Supplier Manufacturer List Catalog

Printing Machinery Rotogravure Printing Machine Rotogravure Printing Machine 6color Rotogravure Printer Machine

Wenzhou Jinyi Machinery Co., Ltd

Preview:

Product DescriptionProduct DescriptionThis machine is used to print PET, PE, BOPP, OPP, CPP, PVC, Cellophane, paper and other film materials with the similar printing performance listed above. Max printing speed 200m/min, automatic register with video inspection monitor, automatic splicing at both unwind and rewind, whole machine PLC control with touch screen.Machine Features1. Programmable controller control the main motor(1Servo motor), rewinding and unwinding motor(here has 4 Servo motors), the speeding and decelerating synchronously to ensure the same linear speed and stable film tension of rewinding and unwinding traction during the printing process and auto roll-changing. Set the tension value of the rewinding and unwinding traction by adjusting the precision reducing valve, and make it closed loop controlling with potentiometer and Servo motor(here has 2 motors: in-feed unit and out-feed unit). The advantage of the swing arm is that it can buffer the fluctuation of the film tension and ensure the registration accurate.2. The feature of seven servo motor controlling: Less rewinding waste, better registration stability1) :Save much material, ink, solvent and power when the capacity is huge.2) :Rewinding speed 180m/min, rewinding waste 3-5m3):Save ink, solvent, power 25%, reduce the cost largely.3. The comparison on the rewinding waste of seven servo motor controlling and magnetic powder auto tension controlling:Magnetic powder auto tension: Rewinding speed 180m/min, rewinding waste 80m.Seven Servo motor controlling:Rewinding speed 180m/min, waste 3-5m.3. Oven pneumatic open and close.SpecificationPrinting colors7colors, 9units.Printing width720mm-1100mm (if need print less than 720mm ,can use lengthen cone)Max unwind and rewind diameter800mm (Outside Type)Max. Mechanical speed180 m/minMax. Printing speed160-200m/min (varies according to the different printing material ink and the familiarity of the operator, etc.).Printing cylinder diameter120mm-350mm(Circume :376.8mm-1099mm)Unwinding tension0-25kg(Vector control)Unwinding traction tension0-25kg(Vector control)Rewinding tension0-25kg(Vector control)Rewinding traction tension0-25kg(Vector control)Register precisionVertical ±0.1mm. (Auto)Main motorVector Servo15kwHeating typeElectric heatingHeating powerESO 29.5kw×4unit =118kwCooling water7.68T/hMachine powerMax182kw(It's the power when start, when it running, the power will be around 95kw)Weight24000kg(1100mm)Dimension(L×W×H)15300×3650×3000mm(1100 model)1. Unwind unit(1) dual station turret with automatic rotation.(2) Horizontal adjustment of printing material auto(3) Air shaft(4) Auto Splicing , pre-transmitting system for roll changes.(Roll change no need reduce speed )(5) Max. diameter of unwind: 800mm(6) Floating roller to adjust the tension.(2 pieces)(7) Two unwinding shafts are transmitted independently by two vector servo motor(5.5KW), when change the roll, no need to slow down the speed or stop the machine.(8) Pre-transmission system: Fix new roll on the B shaft with adhesive tape, when the roll diameter on the A shaft reach to the set value, the ring sounds and press the prepare roll change button to let the turret rotate to a suitable angle, then the B shaft start speeding, when the line speed reach to the current printing speed, press roll change button, the roller will push the material to the new roll, then new roll will adhesive to the old roll then cutter fall down to cut off the old roll, now roll change finish.In-feed unit(1) Double roller rolling type, combined with steel roller and rubber roller.(2) Pneumatic rubber roller control(3) In-feed roller is driven by servo motor 3KW(2set).(4) Floating roller to adjust the tension, absorb tension fluctuation and make printing job accurate, tension floating roller potentiometer can do position inspection, with PLC and frequency converter, it realize closed loop controlling.2. Printing unitPrinting pressure structure(1) Pneumatic pressing roller Φ110mm, PU rubber.(2) Cylinder installation: Shaft-less type; pneumatic(3) Max. length of the printing cylinder: 720-1100mm(4) Distance between each unit: 1000mm.(5) Automatic computerized registration, video inspection system(6) Each printing unit has two long ball screw, driven by synchronous motor, making registration accurate.(7) Each printing unit installed with static brush(8) With ink transfer roller ,with high printing speed ink will uneasy to fly out.(separate motor)Doctor blade(1) Pneumatic movement, controlled by two air cylinder, driven by independent synchronous motor.(2) The horizontal direction, vertical direction and its angle can be adjusted(3) The movement of the doctor blade: ±5mmStructure: adjust the scraper has the quality of structure, can build the best blade Angle, blade adjustment and replacement of the blade is controlled by double cylinder from top to bottom, easy to operate. Lateral movement adopts gear motor rotary CAM motion. Features: extend the service life of version.Ink plate (1) Ink plate up and down in vertical direction, adjusted by hand (2) wheel.(3) Printing cylinder directly dipped into the ink plate.(4) The max. depth of the printing cylinder dipped into the ink: 40mm.(5) Ink plate: made of teflon materialInk recycle systemEach printing unit has one pneumatic ink pump (double type )3.Drying partStructure(1) Each unit has a separating drying system.(2) Sealed oven type which saves energy.(3) Drying method: Electric heating.(4) Intelligent continual constant temperature controlling(5) Blower: centrifugal blower(6) Max oven temperature: 80℃(7) Oven length: 1600mm(8) Intake blower power3KW Outtake blower power0.37KW(9) Independent drying and suction exhausting system, air circulated, max recycled rate 50%.(10) Outside oven increase the amount of blowing air to ensure the drying.(11) Waste air eliminating tunnel.(12) Assisted oven on the top of last printing unit can prevent the last color adhesive to the printing cylinder when the color cover the whole cylinder, making the film completely dry.4.Cooling partStructure(1) Air cooling(2) Air cooling adopts centrifugal blower, water cooling roller touches the surface of the printing material to cool the material completely, and get the material to its original state which is better for precise registration.(3) Centrifugal blower cooling device 0.25KW5.Rewind part (with static brush) (1) dual station turret, automatic rotation.(2) Two rewinding shaft is transmitted by two servo motor(5.5KW).(3) Closed loop tension and tension floating roller, PLC automatic control.(4) Air shaft.(5) The horizontal movement of material is manual.(7) It can alarm automatically when it reaches to the set length.(8) Auto splicing and cutting with nonstop.(Roll change no need reduce speed )Pre-transmission system: Press the prepare roll change button to let the turret rotate to a suitable angle, then the B shaft start speeding, when the line speed of the paper core reach to the current printing speed, press roll change button, the roller will push the material to the paper core on the B shaft, then new roll will adhesive to the old roll then cutter fall down to cut off the old roll, now roll change finish.6.Shaftless structure: Install cylinder adopt pneumatic pull the core shaft, horizontal adjustment adopts screw move.Characteristics: reduce the time to change cylinder and ensure the version concentricity, improve the quality of printing products.(Shaftless)Whole guild roller adopt thimble type without resistance ,no need adjust the guide roller balance Main transmission mechanismYaskawa inverter control motor is used in the main drive system, drive plate in each group.Features: save electricity.7.Frame Structure(1) Cast iron wallboard(2) Thickness of wallboard 70mm, wall board width 500mm (3) Distance between two units: 1000mm(4) Guiding roller diameter: Φ56mm, Φ76mm, Φ100mm(5) Guiding roller length: 1130mmThe overall structure frameeach group use the whole wallboard, each printing unit chassis structure (no connection) for independenceFeatures: convenient installation and operation.(independent printing unit without connection)Main component brands and models7 motor systemKESAI, ChinaHuman-machine InteractionWeinview, TaiwanTemperature controllerKeqiang, ChinaPneumatic partsAirtac,TaiwanMain bearingNSK, JapanLow damping and precision cylinderFujikura, JapanPrecise reducing valveSMCPrecise potentiometerSaia-burgessUnwind Servo motorSFC, Shanghai (5.5kw 2set)Main drive Servo motorSFC, Shanghai (15kw 1set)Traction Servo motorSFC, Shanghai (2.2kw 2set)Rewind Servo motorSFC, Shanghai (5.5kw 2set)Frequency converterYaskawa,JapanAuto register systemKESAI, China (2000FV)Video inspection systemKESAI, China (2000FV)Auto tension controllerWennewLow voltage electricsChint, ChinaSwitchShinuo, ChinaPathway DrawingTwo layer chassis which can do double side adjustment, more convenient and adaptable. Oven guiding roller bearing installed outside to prevent wearing under high temperature.Box type doctor blade dual direction 4 cylinder structure processed by CNC facility which is more accurate and with fast blade replacing.New type ink plate for a better ink circulation.Auto splicing and cutting at both unwind and rewind can save a lot of waste.Each printing unit has 3 blowers, one inlet, one outlet, one for cooling.Each printing unit has cooling roller. Double register screw, vertical move and pre-register function.4 sets floating roller to adjust tension.FAQPre-sales issues01. How to get in touch with us?Direct to the company: WANGNAN ROAD, JIELUTOU VILLAGE, SHANGWANG STREET, RUIAN, WENZHOU, ZHEJIANG, CHINA 03. How to recommend products?We have nearly 14 products in four series. We can also provide non-standard equipment production and new product development services according to customer requirements. According to the customer's requirements to be produced, the purpose of the product to be purchased, the environment, the purchase volume and other related conditions, we will recommend several cost-effective products for the customer to choose. 02. How to answer technical guidance?For some customers who need non-standard equipment, we will communicate with the company's relevant technical personnel according to the customer's specific requirements, taking into account the technical feasibility and production costs, and give customers solutions. 04. How to make a quotation?Based on our company's research and development costs, production costs and customer purchases, we conduct calculations to determine the price of the product.Problems in sale01. About paymentAfter signing the contract, 30% of the total payment will be paid in advance, and the factory will accept the payment and pay the full amount of the machine for delivery. 03. Order trackingAfter the customer places an order, our company will send professional personnel to track the order and regularly report the production progress to the customer. Customers can check the order status on the official website (delivery query). 05. Product packagingBefore the product is shipped, it will be packed in a strict vacuum plus bottom tray (wooden tray or steel tray) 02. About delivery timeAbout 45 working days after receiving the deposit (non-standard machine), the factory will re-decide whether to change the delivery date when the order is confirmed. The standard machine is generally within 30 working days after receiving the deposit 04. Product testingDuring the production process, our company will adopt strict inspection process to ensure product quality. Through internal inspection, we ensure that the components produced by our company meet the technical requirements; through external inspection, we ensure that the components produced by our company are not subject to quality problems; and then pass the whole machine inspection to ensure that the mechanical equipment meets the technical production requirements . 06. Product TransportationProducts are generally shipped from Ningbo Port, China to the destination port by sea.After sales question01. Shelf life/warranty period of the productThe product warranty period is generally one year, and our company provides lifetime maintenance services. If the machine has quality problems, our company will help the customer to solve it through the following ways: a. Send spare parts to the customer. b. Remotely assist customers in maintenance. c. Notify our agent company to send personnel to the customer's factory for maintenance. d. Our company directly dispatches relevant personnel to the customer's factory for maintenance. 03. About machine maintenanceWe will contact customers on a regular basis on how to maintain and maintain the machine. For domestic customers, we will have a master to provide on-site service. 02. About transportation damageIn the process of product transportation, if product damage occurs, it is determined that our product packaging and reinforcement work is not in place, and our company will bear the corresponding losses. 04. Problems during useIf there is any problem in the process of using the product, the customer can directly call or send an email to our after-sales department (24-hour hotline). The personnel of our department will respond immediately and make a decision on the response measures within 24 hours.Company ProfileWenzhou Jinyi Machinery Co., LtdWenzhou JINYI Machinery Co., Ltd is specialized in producing plastic soft packing and paper printing equipment. We have applied ourselves to the printing and packing work of research, development and production for a long time, we take advantage of processing superiority in wenzhou city, absorb other's good aspects to research, improve and perfect our products to make them advanced and reliable characters, our product have excellent quality and price to occupy the market. Our company mainly produce the products as following: any grade of rotogravure printing machine, slitting machine, laminating machine and plastic bag making machine, we also design and produce the special machine for our customer according to their special requirements. We look forward to make friends with much more people with lofty ideals, and also listen to the comments and suggestions from old and new customers. We will go forward hand in hand to build our glorious futu.Why Choose Us?OEM/ODM capabilitiesCompetitive pricing & bulk discountsFast shipping & customs clearance supportTurnkey project solutionsOther ProductsPrinting MachineFlim Blowing MachineDry Laminlating MachineSlitting MachineAuto Online Inspecting Rewinding MachineSeaming MachineBag Making Machine

× More Keyword ..

× More Menu ..

×

Manufacturing & Processing Machinery

×

Industrial Equipment & Components

×

Tools & Hardware Products