IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese API Standard Mud Pump From China Manufacturer1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Petroleum Equipment MachineryMud Circulating SystemMud Pump3 Nb Mud Pump
Zhenjiang Boral Machinery and Equipment Co., Ltd.
Preview:
Product Description A globally professional manufacturer who is capable of producing mud pumps with a complete range of specifications and a large quantity. The P, F and 3NB series mud pumps, designed and produced by the company, receive good reputations from domestic and oversea users depending on excellent performance and reliable quality.3NB SERIES MUD PUMPTechnical FeaturesPower end: The shell is of welding structure made of steel plates, and internal stress is eliminated after welding. The power end drive gear is a transmission gear, witch runs smoothly with high efficiency and a long service time. Crankshaft is a hollow one piece casting. Power end is splash lubrication.Fluid end: the suction valve and the discharge valve conform to ASA and API specifications.It adopts clamp connection between the piston rod and the intermediate rod.The valve seat bores have a bottom shoulders to prevent the sinking of the valve seat. The pistons and cylinder sleeves are spray lubricated and cooled, which allow an extended service life.Damageable pieces have strong currency.3NB Series Mud Pump SpecificationsInput Power kW(PS)368 (500)735 (1000)956 (1300)1176 (1600)Strokes per minutes pm95110120120Piston stroke mm254305305305Gear ratio3.823.8333.813.81Speed of driving shaft r/min363423457457Max. working pressure MPa28.934.534.534.5Hydrostatic test pressure MPa43.451.751.751.7 Valve specification mmAPI 6API 6API 7API 7Max .dia of cylinder sleeves mm0160017001800190Dia. of suction pipe mm0254(10)0305(12)0305(12)0305(12)Dia. of discharge pipe mm0100(4)0100(4)0100(4)0100(4)(Overall dimension(LxWxH) mm4220x2640x24305170x2809x25304400x2998x25655100x3037x2615Total Weight (without sheave) kg15940214502480026000 P SERIES MUD PUMP P series mud pumps which are compact-sized with reliable performance can be used for offshore drilling equipment with higher quality requirements. There are 5 types of P series mud pumps for selection, whose input power ranges from 800HP (597kW) to 2200HP (1640 kW).Features for power end of P series mud pumpThe enclosure is an integral bearing block structure by cast-welding with stress relief after welding.The gear shaft is of overall structure, a belt pulley and a chain wheel can be mounted on any end or both ends.By adopting a roller bearing, stable operation and bearing capability are promoted.Lubrication in parts of gears, bearings, crossheads etc. adopts splash lubrication.The spray system is used for cooling and lubricating the piston and cylinder sleeve surface.By adopting clamping type connection for the cylinder sleeve and the piston rod, it is easy to realize rapid assembly and disassembly as well as replacement.With hard alloy metal cylinder sleeve, its service life is long.By utilizing one-piece reversed Y-type gears, it realizes stable operation.Features for hydraulic end of P series mud pumpThe hydraulic cylinders are arranged in L type manner, which can enable liquid flow to be stable as well as reduce vibration and pressure fluctuation.They combination type hydraulic cylinders can be exchanged mutually and replaced independently.By adopting a rapid-rotation bonnet, it is easy to realize rapid assembly and disassembly as well as installation.The wedge locking type bonnet is an optional piece, the locking foundation is solid and reliable, and it is simple and convenient to assemble and disassemble.The suction pipe can be sucked from the front part or two sides.The discharge pipe can be connected out from two sides.The piston and cylinder sleeve chamber is of an opening type, which is convenient for observation.By utilizing a combination type piston rod structure, the piston can be replaced without dismantling the cylinder sleeve.P Series Mud Pump Specifications ModeP-800P-1000P-1300P-1600P-2200A: Height floor to center of Front inlet suction in. (mm103/4(273)131/4(337)131/4(337)161/2(419)197/8(505)B: Height, floor to center of discharge in. (mm351/4(895)381/4(972)391/4(997)451/4(1149)491/4(1251)C: Overall length over skids in.(mm1615/8(4105)1761/4(4477)1865/8(4740)209(5309)2181/4(5544)D: Width over frame in. (mm629/16(1589)671/8(1705)713/8(1813)755/8(1997)91(2311)E: Width over pinion shaft in.(mm937/8(2384)1011/4(2572)1071/4(2724)1133/4(2889)1253/4(3194)F: Height, floor to top of gear case in.(mm) 60(1524)64(1626)67(1702)75(1905)841/4(2139)G: Height over fluid cylinders in.(mm517/8(1318)547/8(1394)557/8(1419)6215/16(1599)691/8(1756)Max. input horsepower HP (kw)800(597)1000(746)1300(969)1600(1193)2200(1640)Rated pump speed,160150140120105Max. fluid cylinder liner bore in.(mm) 61/4(158.8)63/4(171.5)63/4(171.5)71/4(184.2)9(228.6)Stroke in 81/2(215.9)91/4(235)10(254)12(304.8)14(355.6)Hydrostatic test pressure of standard fluid cylinders psi (kg/cm210,000(703)10,000(703)10,000(703)10,000(703)11,250(791)Ratio of gears 2.4632.6582.8533.4393.969Suction connection, ASA-150 lb. R. J. flange in.8881010Discharge connection cross w/API-5000-lb. R. J. flange in.45566Valve pot, API number MOD.6MOD.6MOD.6MOD.7MOD.8Weight-complete, less sheave lbs.(kg)26,970(12,235)33,200(15,060)42,550(19,300)54,700(24,810)82,000(37,195)F SERIES MUD PUMPTECHNICAL CHARACTERISTICSThe max pressure for F500, F800, F1000 pump is 34.5MPa (5000PSI). These pumps are small, light and reliable. They are the best choices for shallow well and mid-deep well drilling rigs.The max pressure for F1300/1600, F22000 pump is 34.5MPa (5000PSI). These pumps are the best choices for mid-deep well and deep well drilling rigs due to its large displacement and high reliability.The max pump pressure for F1600HL and F22000HL pump is 34.5MPa (5000PSI), and the max displacement can reach 51.85L/S and 77.65L/S respectively. It is the best choice for deep well, super deep well, large displacements horizontal well, high pressure jetbit drilling, off-shore platform and other drilling rigs.The F, series light weight pump is a new product. Under approximately equivalent power, displacement, pump pressure, and other basic conditions, the pump weight is 20% to 25% lighter than same model of F series. Meanwhile, all fluid end parts are forgings with outstanding quality. This pump is used when size and weight of drilling rigs are highly demanding, such as offshore platform drill rigs.QDP-3000 drilling pump is the largest power of quintuple drilling pump and pump package. The max pressure is 51.7MPa (7500PSI), and the largest displacement is 76.34L/S. The largest displacement under the max pump pressure reaches 55.08L/S, and the max pressure under the largest displacement is 27.0MPa, making it better than similar products. Without pulsation dampener, the displacement and pressure fluctuation of this quintuple pump is only about one third of triplex pump. The fluctuations are much less when pulsation damp ener is installed. The pump package is inspired by ideas of modular and skid-mounted design, giving it reasonable layout, smooth operation, high transmission efficiency and reliability. This pump is particularly suitable for offshore platform purpose.Permanent magnet motor direct drive pump and pump package possess qualities of small volume, light weight, simple and reliable transmission, and high efficiency. It is a new energy saving product, and also one of the developing patterns for future drilling pump products.POWER ENDTHE END OF DYNAMIC CHARACTERISTICSContinuous tooth herringbone gear;Replaceable crosshead guides;Frame fabricated with welded steel plate provides the optimum rigidity, high strength and lightweight.Double sealing structure for extension rod provides good sealing;Power end utilizes the combination lubricating system of forced lubrication and splashing lubrication.FLUID ENDThe fluid end mainly consists of cylinders, discharge pipe, pulsation dampener, valve assembly, liners and pistons.Each sealing part adopts rigidity compaction, which has good high pressure tightness;Vertical fluid end features good suction performance;L fluid end features high pressure resistance, convenient for replacing the valve assembly;Discharge desurger, shear relief valve and discharge strainer are fitted at the discharge outlet;The fluid ends of F-1300 and F-1600 mud pump are interchangeable.SPRAYING SYSTEMThis system mainly consists of spraying pump, cooling water tank and spraying pipe. The function is to cool and wash the liner and piston or plunger so as to improve their service life.The centrifugal spraying pump can be driven by a belt sheave mounted on the pinion end or by a separate motor. Medium for cooling and lubricating is water or JH-1 water-based lubricant and refrigerant.The spraying pipe is mounted on the coupling between extension rod and piston rod and reciprocates with piston. Nozzles are adjacent to piston end so lubricating-cooling fluid can wash the contact surface of pistons and liners all the time. Also, the fixed spraying pipe can be used.LUBRICATING SYSTEMThe power end employs integrated methods of forced lubrication and splash lubrication. Forced lubrication includes internal type and external type. The external type independent lubrication system is not influenced by the stroke of the pump, which is of high reliability. The working conditions of gear oil pump can be observed by oil pressure gauge.CHARGING SYSTEMTo avoid air lock at pump inlet under lower pressure, each set of mud pump can be fitted with a charging system. It consists of charging pump with base, butterfly valve, and manifold. The charging pump is driven by a separate motor and is mounted on the suction manifold of mud pump. It can also be driven by the driving shaft of the mud pump via belt to reduce the power consumption.TECHNICAL PARAMETERS MODELF-500F-800F-1000F-1300Max. Liner Size x Stroke170x191 ( 6-3/4 x 7.5)170x229 ( 6-3/4x9 )170x254 ( 6-3/4x10 )180x305(7x12)Strokes Rating, r/min165150140120Power Rating, kW(HP)373 ( 500)597 (800)746(1000)969(1300)Gear Ratio4.286:14.185:14.207:14.206:1Suction Inlet Flange, in8101212Discharge Outlet Flange,in4555Pinion Shaft Dia.,mm (in)139.7 (5-1/2)177.8 (7 )196.9 ( 7-3/4 )215.9 ( 8-1/2 )Key, mm (in )31.75x31.75(1-174x1-1/4)44.45x44.45 (1-3/4x1-3/4)50.8x50.8(2x2)50.8x50.8(2x2)valve potsValve-Over-Valve, API #5Valve-Over-Valve, API #6Valve-Over-Valve, API #6Valve-Over-Valve, API #7Approx. Weight, kg (lb)9770 (21540)14500(31970) 18790(41420)26700 (54170)
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...