IPDB › China Industry › Industrial Equipment & Components
China, Chinese Tube Bundle Puller1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Heater Heat ExchangerOther Heaters Heat ExchangersTube Bundle ExtractorHeat Exchanger Maintenance
Yantai Winner Electronic & Mechanical Technology Co., Ltd.
Preview:
Product DescriptionProduct DescriptionWMC Aerial Bundle ExtractorOperationUsing a Tube bundle puller typically involves the following steps:Preparation: Ensuring the heat exchanger is properly shut down and depressurized.Attachment: Securing the extractor to the tube bundle and the heat exchanger shell.Extraction: Using the tube bundle puller to carefully pull the bundle out of the shell.Maintenance: Performing the necessary cleaning, inspection, and repair work on the bundle.Reinsertion: Using the tube bundle puller to carefully reinsert the bundle into the shell.SpecificationPipe bundle length(mm)6000Pipe bundle diameter (mm)within Φ2000Extractor length(mm)7400Maximum force (T)25Maximum load (T)25Front extensionOptionalRear extensionOptionalExtractor weight (kg)5500Diesel engine power53KwHydraulic systerm pressure180 barMain component1. Clamping cylinder2. Side sling cylinder3. Following trolley4. Lifting frame5. Winch plate6. Winch7. Engine compartment8. Electric control panelDetails ImagesApplication ScenariosMaintenance for bundle extractor Maintenance for diesel engine1. Regularly check the chain and lubricate the trolley.2. Regularly start and operate the hydraulic system.3. Check the lifting and connection points before and after use.4. Check whether the equipment leaks before and after use5. After each use, it is necessary to maintain the bundle extractor, remove dirt from the bundle extractor, and perform descaling, lubrication, and maintenance on the trolley.6. It is not recommended to store the equipment outdoors, regular rust prevention maintenance should be carried out on the equipment.1. Ensure the oil level is within the specified range. Top up with the appropriate oil if necessary.2. Check the coolant level. Add the appropriate coolant if the level is low.3. Ensure the fuel tank has adequate fuel, and check for any leaks or damage in the fuel system.4. Check for any blockages or buildup of dust in the air filter. Clean or replace the air filter as needed.5. Replace the engine oil, oil filter, and fuel filter twice a year.6. Replace the air filter at least once a year.Packaging & ShippingCompany ProfileYantai Winner Electronic&Mechanical Technology, Co., Ltd.For underground pipeline systems, accessories such as valves and flange joints are prone to wear and tear. Regular inspection and maintenance are required. Our clients need our hydraulic torque wrench to disassemble the flange nuts and bolts. Then they will use our bundle extractor to draw the heat exchanger shell to inspect and maintenance. So more Ethylene plants factory find us. The impurities and dirt inside the chemical reactors, separators, Splitter Reboiler and heat exchanger equipment need to be regularly cleaned, maintained, and replaced. We are always proud that our factory is supported well with production team, management team, engineering team and sales team(local and abroad), etc. Quality guarantee is our first principle, we also believe it is important to find a balance between price and quality.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...