IPDB › China Industry › Instruments & Meters
China, Chinese Single Infrared Beam Sensor Safety Photoelectric Photocell for Automatic Door Sliding Gate Security Battery-Powered1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
SensorPhotoelectric SensorSingle Infrared Beam SensorSafety Photoelectric Photocell
Shenzhen Scimagic Development Technology Co., Limited
Preview:
Product Description Product DescriptionUsed forautomatic slide door, automatic Gate Door, coil door , garage door, windows ,barrier etc.FeatureReceiver and TransmitterConsists of a transmitter and a receiver, and the integrated amplifier can produce infrared beam.Anti-interferenceNarrow infrared beam (I or II) can avoid interruption by external lightDetection distanceEven installed at low height(20-40cm from the floor), the detecting distance can also be guaranteed(5-10meters).self-detecting functionThe beam produced by MICROCELL provides a self-detecting function for the sliding doors. Once the self-detecting beam isinterrupted, the door will stop closing and reverse rapidly to the utmost width. The door will open until the detecting beam isresumed. When the door completely closes, the detecting beam becomes invalid.Technical SpecificationWorking voltage Transmitter:3.6V(14250 lithium battery) Not IncludeReceiver:12-24V DCWorking current Transmitter < 85μA,Receiver <30mA (24V DC)Photocell wavelength 940nmAngle of emission ≤+5Receiving range <12mRelay contact loading capacity 1A 30V/DCSize 100*40*35mm Safety Instruction1.For security, please read the user manual carefully before initial operation;2.This photocell is without any fuse,so Please make sure the power is off before installation;3.Only used this system that do not cause any danger life or property during the running failure or its security risks eliminated;4.Please guarantee the products used in effective working rangeInstallation instruction4.1 Receive module J4 in above picture is the option switch for NO and NC of photocell switch.4.1.1When the short circuit cap on NO,it is normally open.4.1.2 When the short circuit cap on NC,it is normally closed.4.2 Installation4.2.1 The photocell should be installed more than 20cm above the ground (to avoid reflection), and the distance between emitter and receiver should be more than 50cm.4.2.2 End user should install the photocell receiver on the back of the direct sunlight or other strong light source(±5-) to keep photocell work well steadily.4.2.3 Avoid installing other infrared photocell emitters within the effective distance of receiver.4.2.4 If the end user need to install other photocells in one same straight line , the receivers could be installed in the twoends and the emitters could be back-to-back installed.4.2.5 Stable installation could avoid the signal of emitter and receiver skewing due to lightly vibrate and the malfunction.4.2.6 When the product is install in some place with angle , end user could adjust the PCBA to make the installation better.4.2.7 Connect the power after the inspection, when short circuit cap at NO, After the battery is installed on the LED lamp of the transmitting module, the LED lamp lights up for 0.5 seconds and then goes out, receiver module LED turns on, receiver module contact at off; when make the cap of emitter and receiver in alignment, receiver module LED is off, NC/NO is on ;when something or someone shelter the sensor, receiver module LED will turn on , NC/NO contact is off. When short circuit cap at NC, the state of NO/NO is opposite to the above phenomenon.Parcel displayPackaging & Shipping1 pcs/ White Box, 30-50 pcs/bag 500/pcs per CartonAfter Sales ServiceCompany ProfileOur factory ShenZhen Scimagic Development Technology Co. Ltd is a high-tech company that specializes in designing, manufacturing and selling Alarm system ,wireless RF receiver (remote controller), RF Remote control ( key fob and transmitter), RF module (wireless transmitter Module and Receiver Module), Remote Control Duplicator( face to face copying duplicator and machine copy duplicator). We have been manufacturing electronic product for 10 years . Our professional R&D staff can meet your different request . We hope to promote mutual benefit and build long term business with customers all over the world by joint efforts. FAQQ1. Can I have a sample order?A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.Q2. What about the lead time?A:Sample needs 3-5 days, 1000 piece production time needs 1 weeks for order quantity more than. Q3. Do you have any MOQ limit ?A: Low MOQ, 1pc for sample checking is available.Q4. How do you ship the goods and how long does it take to arrive?A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.Q5. How to proceed an order ?A: Firstly let us know your requirements or application. Please confirm the frequency first: 315mhz 433mhz or 868mhz Then please confirm the chip: rolling code : HCS301, HCS300, HCS200 etc. Learning code: PT2240, EV1527 etc. Fixed code :SC2260 , SC2262, etc. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.Q6. Is it OK to print my logo on Remote control and receiver product?A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.Q7: Do you offer guarantee for the products?A: Yes, we offer 1 years warranty to our products.Q8: How to deal with the faulty?A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%. Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...