IPDB › China Industry › Instruments & Meters
China, Chinese 180kw 1720nm High Torque Measurement Accuracy Diesel Engine Electric Dynamometer Test Bench1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Test InstrumentTest MachineElectric Dynamometer Test BenchDiesel Engine Test Bench
Seelong Intelligent Technology (Luoyang) Co., Ltd.
Preview:
Product Description SSCD180-1000-3800 180kW 1720Nm High Torque Measurement Accuracy Diesel Engine Electric Dynamometer Test BenchProduct DescriptionThe 180kW diesel engine electric dynamometer test bench is a specialized test system integrating electric dynamometer technology and intelligent control. It quantitatively evaluates engine performance through full-condition dynamic simulation and plays a core role in the research and development verification and production quality control of small and medium power diesel engines. This test bench adopts a modular integrated design. Its core function is to simulate the actual operating load of the engine through an electric dynamometer, combined with a high-precision sensor array and an intelligent control system, to achieve real-time collection and analysis of power parameters (power/torque/rotational speed), economic indicators (fuel consumption), and emission data. The test bench needs to be equipped with professional vibration isolation foundations (natural frequency ≤6Hz) and sound barriers (noise reduction ≥42dB) to ensure the stability of the test environment and the accuracy of the data.Engine Test Bench ComponentsSSCD180-1000-3800 180kW 1720Nm High Torque Measurement Accuracy Diesel Engine Electric Dynamometer Test Bench Core Components(1) Electric dynamometer systemModel configuration: 220kW AC asynchronous motor, with four-quadrant dynamic operation capability (power generation/electric mode switching time ≤25ms)Technical advantages: Dynamic torque response time < 12ms (step control), energy feedback efficiency ≥93% (power recovery through grid-connected inverter)(2) Intelligent measurement and control systemHardware platform: PLC (Foreign Brand) + ADVANTECH industrial computer architecture, supporting 16-channel synchronous sampling (sampling rate 2kHz)Software features: Preset test condition library (including 12 standard procedures such as ISO 8178 steady-state cycle, WLTC transient cycle)Real-time 3D data visualization (supports dynamic generation of torque-speed-fuel consumption 3D MAP)Multi-level fault warning mechanism (warning response time ≤600ms, with sound and light alarm and automatic shutdown protection)(3) Auxiliary function system1. Fuel supply unit:High-pressure common rail simulation unit (adjustable from 0 to 170MPa, flow control accuracy ±0.35% FS)Multi-grade fuel intelligent switching system (supports automatic switching of 0#/-35# diesel, switching time ≤15s)2. Thermal management unit:80kW high-efficiency plate heat exchanger system (temperature control range 20-110oC, accuracy ±0.6oC)Variable-frequency speed cooling fan (automatically adjusts heat dissipation power according to the temperature gradient of the coolant)3. Emission test unit:Five-component gas analyzer (CO/HC/NOx measurement accuracy ±1.2%, O2/CO2 measurement accuracy ±0.6%)Particulate matter sampling and analysis system (lower limit of PM measurement 0.015mg/m3, in line with the latest ISO 16183 standard)Technical specificationParametersTechnical indicatorsMeasurement accuracyPower measurement range0-180kW (continuous and stable operation)±0.55%FSSpeed control range1000-3800r/min±0.3r/minTorque measurement accuracy±0.25%FS (20%-100% range) Fuel consumption rate188-235g/kW·h±0.35%FSExhaust back pressure control0-90kPa (control accuracy ±0.4% FS) Environmental simulation parametersTemperature -35 ° C to +55 ° C, altitude 0-4800mTemperature ±1.2oCTypical ApplicationsSSCD180-1000-3800 180kW 1720Nm High Torque Measurement Accuracy Diesel Engine Electric Dynamometer Test Bench Typical Applications Research and development testingPower performance optimization: Complete the mapping of the full-speed range external characteristic curve (torque fluctuation ≤1.2%), and optimize the fuel injection pressure and turbocharging to match the parameters.Emission compliance verification: Support for the National VI b emission certification test (NOx emission control accuracy ±2.5%), and evaluation of the efficiency of the SCR+DPF composite after-treatment systemElectronic control system calibration: Test the low-temperature start-up fuel injection strategy and rail pressure control logic through the reverse drag function (electric mode power ≥40kW) Reliability verificationDurability performance test: Perform 1000 hours of intensive durability cycles (load fluctuation ≤3.5%) and monitor cylinder liner wear ≤0.025mmEnvironmental adaptability test: Simulate the start-up performance and stable operation capability in high altitude (4,200 meters above sea level, with an intake oxygen concentration of 11.8%) and extremely cold conditions (-30oC) Production quality controlOff-line full inspection process: 6-minute rapid performance scan (covering 14 key indicators), power consistency controlled within ±1.8%Process change validation: Performance comparison after component replacement (e.g. Fuel consumption deviation after fuel injector replacement ≤0.7%, emission index fluctuation ≤3%)The test bench, through the deep integration of electric power measurement technology and intelligent control, achieves full process test coverage from R&D design to mass production quality control, providing precise quantitative data support for the technical upgrade and quality control of 180kW diesel engines. Models Parameter InformationModelPower (KW)Torque (Nm)Rated Speed (rpm)Max Speed (rpm)Torque Measurement AccuracySSCD15-1000/450015143100040000.2%FSSSCD30-1000/450030286100040000.2%FSSSCD45-1000/400045430100040000.2%FSSSCD60-1000/400060573100040000.2%FSSSCD90-1000/350090859100035000.2%FSSSCD110-1000/35001101050100035000.2%FSSSCD160-1000/35001601528100035000.2%FSSSCD200-1000/33002001910100033000.2%FSSSCD250-1000/33002502387100033000.2%FSSSCD300-1000/33003002865100033000.2%FSSSCD30-1500/500030191150050000.2%FSSSCD45-1500/500045286150050000.2%FSSSCD60-1500/500060382150050000.2%FSSSCD90-1500/500090573150050000.2%FSSSCD132-1500/4500132840150045000.2%FSSSCD160-1500/45001601019150045000.2%FSSSCD200-1500/40002001273150040000.2%FSSSCD250-1500/40002501592150040000.2%FSSSCD300-1500/38003001910150038000.2%FSSSCD400-1500/38004002546150038000.2%FSSSCD500-1500/38005003183150038000.2%FSCan be customizedCompany ProfileIntelligent Technology (Luoyang) Co., Ltd. is a high-tech enterprise specializing in equipment measurement, control, design, manufacturing and sales of power engineering systems in various fields such as aerospace, automobiles, and new energy. The company is located in the beautiful Peony Flower City - Luoyang, the capital of God.The company always adheres to the business philosophy of "taking technological innovation as its mission and quality service as its purpose", constantly surpassing the advanced level in the same industry, integrating into the world, measuring and controlling the future, and creating high-quality products. To provide customers with products and services with high intelligence, precision, speed, reliability, and added value.All employees of Seelong Intelligent Technology (Luoyang) Co., Ltd. warmly welcome sincere cooperation from domestic and foreign customers, and work together for the future and common development.The main products include engine test benches, new energy power test benches, gearbox test benches and other products. Establish a complete sales service system, adhering to the business philosophy of quality for survival and service for development, to provide users with power engineering measurement and control solutions in various fields. Exhibition Packaging & Shipping FAQQ: What's the minimum order quantity for our cooperation?A: We support small trail order of 1 pcs for stock products.Q:How can I learn more about the products?A: Please leave your email and we will send you your electronic sample book.Q: What's your payment term?A: Normally 40% T/T deposit, pay in full before shipment.Q:What's the lead time for my orders?A: Dynamometers production cycle is 6-8 weeks, sensors production cycle is 2-3 weeks, other products please contact with us.Q: How do we get the overall solution of the test bench?A: Leave us your email, our technical staff will communicate with you about the detailed plan.Q: Can I come to visit your factory?A: Sure, you are always welcomed to have a visit.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...