IPDB › China Industry › Chemicals
China, Chinese Abrasion Resistant Paste Wearing Compound1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
AdhesiveEpoxy Resin AdhesiveWear CompoundAbrasion Resistant Paste
Xiangyang High-Temp Resistant New Material Technology Co., Ltd.
Preview:
Product Description TS11490F 8 hours curing ceramic bead filled epoxy wear compound abrasion resistant pasteProduct Description:High-density, alumina ceramic bead-filled, toughened epoxy system for repairing and protecting equipment from wear and abrasion caused by handling and processing particulate matter as solid or in slurry form.Product Features: 1.ceramic-filled for outstanding resistance to abrasion2.Renews worn surfaces fast-reduces downtime3.Extends wear life- resists sliding abrasive wear and eliminates costly wear part inventory4.Non sag- provides abrasion resistance on over-head and vertical surfaces.Product Application:1.Cyclone and separator bodies2.Dust collectors and exhausters3.Pump liners and impellers4.Fan blades and housings5.Chutes and hoppers6.Elbows and transition pointsTechnical Data: Color:Grey Specific gravity:2.43g/cm3Mix ratio by weight:8:1Mix ratio by volume:4:1Working time(min):65minCompressive strength(GB/T1041):112.0MPaTensile strength(GB/T6329):32.0MPaShear strength(GB/T7124):14.0MPaFlexural strength(GB/T9341):45.0MPaFully cured time:24hTemperature range:-60~160oCHow to Use:1. Surface treatment: roughening the parts to be treated, sanding or sandblasting with an angle grinder, etc.; cleaning the roughened surface; the treated surface should be a rough and dry fresh substrate surface, and should be No oil and dust.2. Preparation: Mix the components A and B of the small particle wear-resistant protective agent according to the mass ratio A:B=4:1, and use them within 30 minutes.3. Coating: apply the uniformly mixed small particles of wear-resistant protective agent layer by layer to the area to be repaired, preferably at a thickness of 3-10 mm. The adhesive layer should be compacted to fully infiltrate the substrate; after the coating is applied to the required size, the surface layer is smoothed.4. Curing: Curing at 25oC for 16 hours can be put into use. When the temperature is lower than 10 degrees, it can be cured by baking with an iodine tungsten lamp or electric heating plate for 2 hours.Packing: 500g/set, 10kg/set Transport and storage: Keep the epoxy coating in dry, cool and covered facility, shelf life is 2 years. Avoid inversion and collision in transportation. This product is not dangerous goods.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...