IPDB › China Industry › Instruments & Meters
China, Chinese Phase Sequence Tester Indicator 3 Phase Rotation Tester Digital Phase Indicator Detector LED Meter1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Meter for ElectricityEnergy Meter Power MeterThree Phase Rotation IndicatorNon-Contact Phase Detector
EP HIPOT ELECTRIC CO., LTD.
Preview:
Product Description General Information:The EPR60 three phase rotation indicator (also called: non-contact phase detector) is a major breakthrough in the traditional phase sequence detection method. In the traditional phase sequence detection, the terminal of the three-phase wire must be removed, and the three exposed clips or test pins of the phase sequence meter must be connected to the exposed 3 live wires, and EPR60 adopts clamp-shaped non-contact inductive measurement. There is no need to remove the wires or touch the high-voltage exposed live wires. Directly clamp the three ultra-inductive high-insulation clamps to the insulation skins of the three-phase live wires to detect phases. At the same time, sound and light indicate the positive or negative state of the phase sequence of the three-phase power supply.The EPR60 three phase rotation indicator also has functions such as live line inspection, simple power inspection, open circuit search, break point location, line maintenance and so on.The EPR60 three phase rotation indicator is quick and convenient to detect, and the display is clear at a glance, which greatly improves the safety of on-site testing, effectively protects the personal safety of operators, and increases productivity. It is the three-phase power supply phase sequence, motor detection, and circuit maintenance. Safety equipment.Main technical data table:ItemsTechnical SpecificationsFunctionsPhase detection (positive phase, reverse phase), live line check, simple power check, lack of phase judgment, open circuit search, break point location, line maintenance.Power Supply9V battery, continuous use time is about 70 hours.Measurement MethodNon-contact clamping methodWire PositionThe wire to be measured is in the center of the jawsFrequency50Hz/60Hz automatic recognitionLive Power RangeAC70~1000V, 45/65Hz (sine wave continuous input), static electricity detection.Measure The Highest VoltageAC1000VClamp Wire SizeOuter diameter ?1.5mm~?48mmDisplay[Normal phase] The 4 phase detection lights turn on sequentially in a clockwise direction;[Reverse phase] The 4 phase detection lamps turn on in order in a counterclockwise direction.[Live electricity] L1, L2, and L3 lights are on within the voltage setting range.[Lack of phase] L1 or L2 or L3 light is off.[Open circuit] L1 or L2 or L3 light is off.Buzzer [Normal phase] The instrument emits intermittent short beeps;[Reverse phase] The instrument emits a continuous long beep.Battery CheckThe POWER indicator light is on after the power is turned on; the LOW BATTERY light is on when the battery is insufficient.Clamp Lead Length0.6mInstrument SizeLength 117.6mm×Width 81mm×Thickness 25mmAutomatic Shut-DownAbout 6 minutes after power on, the meter will automatically shut down to reduce battery consumptionBattery VoltageWhen the battery voltage drops to about 5.2V, the battery voltage low symbol is displayed, reminding to replace the batteryWeightMeter: 260g (including battery)Maximum Rated Power300mVAWorking Temperature and Humidity-10oC ~ 55oC, below 80%rhStorage Temperature and Humidity-20oC ~ 60oC, below 90%rhDielectric Strength3.7kVrmsSuitable For Safety RegulationsEN61010-1: 2001, EN61010-031: 2002, pollution level 2, CAT III (600V), instant overvoltage 6000V.Please contact EP Hipot Electric for more details on China Portable China Portable EPR60 Three phase rotation indicator (also called: non-contact phase detector).
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...