IPDB › China Industry › Industrial Equipment & Components
China, Chinese New Type Automatic Drain Dry Slag Self Cleaning Filter Special for Acrylic Emulsion Polymer Latex1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Filtration Equipment PartsOil FilterScraper FilterSelf Cleaning Filter
Yantai Pris Machinery Co., Ltd.
Preview:
Product Description 1. What is the acrylic emulsion?Acrylic emulsion is milky white or nearly transparent viscous liquid. Acrylic emulsion is an emulsion formed by copolymerization of pure acrylate monomers. It is a kind of emulsion with small particle size, multi-purpose and outstanding performance. It is suitable for a variety of coating formulations and has outstanding water resistance and weather resistance, especially Excellent performance in high-gloss and semi-gloss coatings. Acrylic emulsion has good water resistance, alkali resistance and stain resistance, and has good adhesion to masonry, wood and steel surfaces, it can not only formulate flat, semi-gloss and high-gloss latex paints, but also can formulate high-quality Finishing coatings for floors, cement tiles and tennis courts.Impurities in acrylic emulsion can generally be considered to come from impurities in pipelines, agglomeration in polymerization,glue blocks, etc.So that for high quality demand,the emulsion needs to be filtered.2.New type of scraper filter with slag extruding system Our Advantages1. Self-cleaning function2. Automatic control is optional3. The filter runs without slag4. Do not use filter bags5. Optional air motor or electric motor6. Can operate at low pressure7. While filtering and discharging slag, it can work continuously for 24 hours8. Drain the dry slag and reduce hazardous waste Detailed Photos Working principlesThe inner scraper filter is to discharge the liquid smaller than the fineness requirement from the screen, and keep the colloidal impurity particles larger than the fineness requirement inside the screen, and scrape the impurities through the rotary motion of the scraper.In actual use cases, take acrylic emulsion as an example. The emulsion enters the filter through the feed port. During the filtration process, impurities larger than the fineness of the screen are kept on the stainless steel filter sieve. As time goes by, the quantity of impurities is increasing.In this case,we need to clean the impurity and discharge them outside.(1) Automatic cleaning: The user sets the filtering time by himself through accumulated experience. When the filtering time reaches the set value, automatic cleaning will be started. The specific process: the control system gives a signal, the motor starts to drive the shaft to rotate, and the scraper on the shaft will Scrape off the accumulated impurities on the filter until the cleaning time reaches the set value and the motor stops working. The blowdown valve opens to start blowdown.(2) Manual cleaning: The motor runs continuously to drive the stirring shaft to rotate, and the scraper continuously removes impurities on the filter screen. When the time setting value is reached, the sewage valve opens to start sewage discharge.(3) Pressure difference cleaning: (non-standard configuration, optional choice): The working principle is that when the pressure difference between the inlet and outlet reaches the set value, the motor starts to work to drive the scraper to scrape off the impurities accumulated on the filter screen , after reaching the set value of cleaning time, the motor stops working.Product ParametersModel 01:P-GZND2731. Filtration area: 0.43 square meters2. Design flow: 3-10 tons/hour3. Filtration accuracy: 60-350 mesh4. Viscosity range: less than 9000cpsModel 02:P-GZND5001. Filtration area: 0.84 square meters2. Design flow: 8-20 tons/hour3. Filtration accuracy: 60-350 mesh4. Viscosity range: less than 9000cpsFAQ
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...