IPDB › China Industry › Packaging & Printing
China, Chinese Smart Flexographic Three-Color Printing Machine1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Printing MachineryFlexographic PrinterPrinting MachineFully Automatic Machine
Changda Canghai Trading (Zhangzhou) Co., Ltd.
Preview:
Product Description Product Description1. Paper feeding unit:1. Machine clutch:1) Electric control machine clutch alarm (alarm circuit is plugged in and can be disconnected), which continuously rings during operation to ensure the safety of workers.2) Pneumatic interlocking device3) The main motor and fan use variable frequency motors and variable frequency controllers, which are energy-saving, start smoothly, and are equipped with motor start protection devices.2. Front edge paper feeding system1) Suction-assisted paper feeding, fan 7.5KW, can adjust the air volume according to the degree of cardboard bending to ensure smooth paper feeding.2) The servo motor controls the front edge wheel to feed paper, making paper feeding more accurate and faster3) The paper lifting and paper dropping are driven by cylinders, which are quick and powerful.4) The side baffle is electrically adjusted, the front baffle is manually adjusted, and the rear baffle is electrically adjusted.5) Taiwan's super-resistant front edge paper feeding wheel is durable and wear-resistant.6) Sheet feeding device (continuous or sheet feeding can be selected as needed)7) 7-inch computer touch screen control (display production volume, counting alarm, phase adjustment) II. Printing Department: (optional 1-4 color printing)II. Printing Department1. Printing roller:1) Outer diameter: 395mm, (including plate outer diameter: 410mm).2) Steel pipe surface grinding, hard chrome plating.3) Balance correction, smooth operation.4) Ratchet fixed plate winding shaft.5) Full plate hanging plate slot, suitable for 9mm hanging plate strips.6) Loading and unloading printing plates, foot switch electric control forward and reverse rotation.2. Paper feeding upper and lower rollers:1) Upper roller outer diameter 86mm, thick-walled steel pipe. Equipped with two paper feeding wheels.2) Lower roller, outer diameter 140mm, thick-walled steel pipe, surface grinding, hard chrome plating.3) The paper feed roller gap dial is manually adjusted, and the adjustment range is 0-12mm. 3. Steel anilox roller1) The outer diameter is 180mm (mesh number: 180, 200, 220, 240, 260, 280). (The mesh number is optional)2) The steel tube surface is ground, the mesh is pressed, the surface is ground, and hard chrome is plated.3) Balance correction is performed, the operation is stable, the dots are consistent, and the ink is applied evenly.4) The anilox roller is equipped with a wedge overrunning clutch to evenly distribute and wash the ink.5) The anilox gap dial is manually adjusted.4. Rubber roller:1) The outer diameter is φ 180mm.2) The steel tube surface is wrapped with wear-resistant rubber and balanced.3) The rubber roller is specially ground at high and medium heights, and the ink transfer effect is good.4) The rubber hardness is 60-65 degrees. 5. Phase adjustment mechanism:1) Planetary gear structure.2) Computerized 360-degree adjustment of printing phase (adjustable when running or stopped).3) Electric adjustment of lateral position, adjustment distance ±10mm.7. Ink circulation1) Pneumatic diaphragm pump, stable ink supply, convenient and quick operation and maintenance.2) Ink filter, filter impurities.7. Printing phase fixing device:1) Cylinder brake device2) When the machine is separated to adjust the phase, the brake mechanism limits the operation of the machine and maintains the original gear position fixed point. 6. Oil supply device:1) Mechanical oil pump.2) Circulating oil supply, uniform ink application on the gears, and balanced oil level for each group.3. Die cutting section1. Die roller (lower roller)1) Outer diameter is φ360mm. (excluding die)2) Made of cast steel, surface ground and hard chrome plated. 3) Balance adjustment to increase operation stability.4) The spacing between the screw holes for the die cutter is 50mm*50mm.5) Applicable die cutter height is 25.4mm.6) Die cutting thickness is 16mm (for three-layer boards), 13mm-15mm (for five-layer boards). 2. Rubber pad roller (upper roller)1) The outer wall is φ388.9mm.2) Made of cast steel, surface ground, and hard chrome plated.3) Balance adjustment to increase operation stability.4) Manually adjust the gap with the die cutter roller.5) Rubber pad thickness is 8mm, (outer diameter is: φ404.9mm), width is 250mm 3. Transverse movement and repair device: 1) Mechanical transverse 40mm, floating device, die cutting uniform scale automatically compensates for line speed, which can make the die cutting rubber pad wear evenly and extend service life.2) Repair uses electric repair device to improve the reuse rate of rubber pads, which can be repaired 3-4 times.3) Pneumatic automatic separation device for die-cutting rollers reduces the wear of rubber pads, thereby increasing service life. 4. Plate-free fixture:1) Die-cutting, quick interchange and multi-function in one, conventional boxes do not need templates.2) It has the same effect as thin knife slotting, thus saving production costs.IV. Transmission gear:1. 40 Luo alloy steel, tempered, shaved and nitrided.2. Six-level accuracy, smooth operation, low noise, hardness HRC55-60, long life, low wear, can ensure the accuracy of printing color registration for a long time.3. The transmission parts of the whole machine (shaft and gear connection) are all keyless connection (expansion sleeve) to eliminate the connection gap, which is suitable for long-term high-speed operation with large torque.V. Oil supply device:1) Mechanical double oil pump oil supply.2) Circulation oil supply, uniform oiling of gears, and balanced oil level of each group.3) Lubrication adopts closed spray lubrication system to ensure transmission accuracy and life. Detailed Photos Product Parameters 1226 front edge three-color printing rotary die-cutting machineWallboard inner width 3000mmWallboard inner width 3000mmMachine mechanical speed 150 pieces/minMachine mechanical speed 150 pieces/minMachine economic speed 100-120 pieces/minMachine economic speed 100-120 pieces/minMaximum paper size 2700*1200mmMaximum paper size 2700*1200mmMinimum paper size 380*600mmMinimum paper size 380*600mmMaximum printing size 2600*1200mmMaximum printing size 2600*1200mmMaximum sheet size 2700*1400mmMaximum sheet size 2700*1400mmSlot width*slot depth 7*300 (blades can be added to increase slot depth)Slot width*slot depth 7*300 (blades can be added to increase slot depth)Maximum die-cutting size 2600mmMaximum die-cutting size 2600mmStandard plate thickness hanging plate: 7.2mmStandard plate thickness hanging plate: 7.2mmMain motor power 15KwMain motor power 15KwBlower power 7.5KwBlower power 7.5KwPower used during production 22.5KwPower used during production 22.5KwTotal power 26KwTotal power 26KwColor registration accuracy ±0.5mmColor registration accuracy ±0.5mmDie-cutting accuracy ±0.75mmDie-cutting accuracy ±0.75mmCompany Profile
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...