IPDB › China Industry › Packaging & Printing
China, Chinese Hot Sale Mug Printing Sublimation Tumbler Transfer Machine Heat Press1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Printing MachineryHeat Press MachineMug Heat Press MachineCup Heat Press Transfer Machine
Shenzhen Goosam Technology Co., Ltd.
Preview:
Product DescriptionMUG HEAT PRESSSummaryThis machine can thermo-transfer colorful pictures and words onto the mug, bottle and glass etc made of ceramic, plastic, glass etc heat-resistant hard surface in cylindrical shape. MaterialsTime (Seconds)Temperature (Celsius Degree)Ceramic mug180180-190Glass cup120-150180-190Stainless steel bottle30170Bottle (aluminum)25-30170-175Technical ParametersVoltage: 220VPower: 500WTemperature range: 0-250℃Time control range: 0-999 SecTemperature error band: +/-5 degrees Mug heater size: 20ozWeight: 6kgRead before operating :1. Be sure to operate with a safe ground wire! Check the voltage before using this machine. 2. After finishing your work, please turn the machine off.3. Don't touch the heater when the machine is on or when its temperature is still high after turning it off.4. Keep out of the reach of children.Please Note:1. Be careful of the hot heating surface2. Please make sure the heating temperature and transfer time are correct3. In order to extend the service life of this machine, please turn the machine off for 15 minutes after 4. using it continuously for 4 hours.5. You may refer to "Suggested Time and Temperature" chart to determine the suitable temperature and time according to the material.6. Each time you put through power supply and turn power switch on, the heater will take some time to warm up to reach the target temperature for the first press. COMMON PRINTING FAILURES and THEIR POSSIBLE REASONS:1. The color is lighter: the temperature is too low; OR the pressure is not even; OR the time is too short.2. The design is indistinct: the time is too long which led to ink diffusion.3. The design has no luster: the pressure is too high; OR the temperature is too high.4. Part of design is indistinct: heat printing zone OR the heating is not even.5. Scar on design: heat printing time is too long.6. Depth of color is not the same: pressure not even OR the coating is not even.7. Paper stick to the object: the temperature is too high; OR the coating of the object is not good.8. Please do not set the temperature to more than 250°C or it will shorten the service life of the machine.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...