IPDB › China Industry › Instruments & Meters
China, Chinese Hxmc-221 Industrial Cyclone Dust Collector for Steel/Cement/Crusher Equipment1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Filtration Equipment PartsDust CollectorDust CollectorCyclone Dust Collector
Qingdao SWDF Trading Co., Ltd.
Preview:
Product Description Product DescriptionCyclone dust collector is composed of intake pipe, exhaust pipe, cylinder, cone and ash bucket. Cyclone dust collector has simple structure, easy manufacturing, installation and maintenance management, low equipment investment and operating costs, and has been widely used to separate solid and liquid particles from the air stream, or to separate solid particles from the liquid. Under ordinary operating conditions, the centrifugal force acting on the particles is 5 to 2500 times that of gravity, so the efficiency of the cyclone is significantly higher than that of the gravity settling chamber. Based on this principle, a cyclone dust removal device with a dust removal efficiency of more than 90% has been successfully developed. In the mechanical dust collector, the cyclone dust collector is the most efficient one. It is suitable for the removal of non-viscous and non-fibrous dust, mostly used to remove particles above 5μm, and the parallel multi-tube cyclone dust collector device also has 80 ~ 85% dust removal efficiency for particles of 3μm. Selection of high temperature, abrasion and corrosion resistance of special metal or ceramic material structure of cyclone dust collector, can be operated at temperatures up to 1000oC, pressure up to 500×105Pa conditions. From the technical and economic aspects, the pressure loss control range of cyclone dust collector is generally 500 ~ 2000Pa. Therefore, it belongs to the medium efficiency dust collector, and can be used for the purification of high temperature flue gas, is a widely used dust collector, more used in boiler flue gas dust removal, multi-stage dust removal and pre-dust removal. Its main disadvantage is that the removal efficiency of fine dust particles (< 5μm) is low. Preparation1, check whether the connection parts are firmly connected.2, check the dust collector and flue, dust collector and ash hopper, ash hopper and ash discharging device, ash conveying device and other joint tightness, eliminate ash leakage, gas leakage phenomenon.3. Turn off the baffle valve, start the fan, and start gradually after no abnormal phenomenon.Technical requirements1. Pay attention to the changes of easy to wear parts such as the inner wall of the outer cylinder.2. When the temperature of dusty gas changes or the humidity decreases, pay attention to the adhesion, blockage and corrosion of dust.3, pay attention to the change of pressure difference and exhaust smoke status. Because wear and corrosion will perforate the dust collector and lead to dust emission, the dust removal efficiency decreases, the exhaust smoke color deteriorates, and the pressure difference changes.4, pay attention to the air tightness of each part of the cyclone dust collector, check the change of the cyclone gas flow and dust collection concentration.ModelFiltered air volume(m3;/h)Filter area(m3)Collection efficiency(%)Overall size(L*W*H)mmHXMC-80S1200013099.5φ800*800*2980HXMC-8058007099.5φ800*800*2980HXMC-9767507599.5φ2500*2500*5780HXMC-1451008011299.5φ3000*3000*5780HXMC-2211539017199.5φ3500*3500*5780
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...