IPDB › China Industry › Packaging & Printing
China, Chinese Single Station Pneumatic Driver Logo Shirts Heat Press Machine1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Printing MachineryHeat Press MachineLogo Heat Press MachineHeat Press Machine
Shenzhen Goosam Technology Co., Ltd.
Preview:
Product DescriptionSize15*15LOGO HEAT PRESS MACHINESummary:A LOGO heat press machine is the machine that presses a transfer onto an printable substrate . Using high temperatures and pressures for a certain amount of time, the transfer is permanently embedded into the product. Heat presses are recommended for professional and satisfying results simply because standard laminating devices and home hand irons can't get even near the temperatures required for a reliable transfer.Please enter the title hereThis street light features high brightness, energy saving, environmental protection, and easy installation. It has a waterproof rating of IP67 and has passed CE certification. It is suitable for schools, parks, roadsides, factories, squares, etc. It has a warranty period of 3 years. Moreover, we can provide various styles to meet your needs.Technical ParametersWork Size:15*15cmVoltage:110/220V Power:450WTemperature:0-220°CTime for heating up:5-10 minutesPacking Size:60*44*33cmGross Weight:15.7KGRead before operating :1. Be sure to operate with a safe ground wire! Check the voltage before using this machine. 2. After finishing your work, please turn the machine off.3. Don't touch the heater when the machine is on or when its temperature is still high after turning it off.4. Keep out of the reach of children.Please Note:1. Be careful of the hot heating surface2. Please make sure the heating temperature and transfer time are correct3. In order to extend the service life of this machine, please turn the machine off for 15 minutes after 4. using it continuously for 4 hours.5. You may refer to "Suggested Time and Temperature" chart to determine the suitable temperature and time according to the material.6. Each time you put through power supply and turn power switch on, the heater will take some time to warm up to reach the target temperature for the first press.COMMON PRINTING FAILURES and THEIR POSSIBLE REASONS1. The color is lighter: the temperature is too low; OR the pressure is not even; OR the time is too short.2. The design is indistinct: the time is too long which led to ink diffusion.3. The design has no luster: the pressure is too high; OR the temperature is too high.4. Part of design is indistinct: heat printing zone OR the heating is not even.5. Scar on design: heat printing time is too long.6. Depth of color is not the same: pressure not even OR the coating is not even.7. Paper stick to the object: the temperature is too high; OR the coating of the object is not good.8. Please do not set the temperature to more than 220°C or it will shorten the service life of the machine.Applcation
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...