IPDB › China Industry › Chemicals
China, Chinese 2017 Special Repair Paint High Quality Auto Maintenance Paint1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Paint CoatingBuilding CoatingChenical PaintCar Paint
Guang zhou Jinwei Chemical Co., Ltd.
Preview:
Product Description Specifications of paintAbrasion resistant water based durable system designed for superior anti-static protection of interior concrete floorsBy ACL Staticide is a one component abrasion resistant water based durable system designed for superior anti-static protection of interior concrete floors in electronics manufacturing, assembly and ESD protected areas. Surface resistivity measures 106 - 108 ohms per square average. It is an economical alternative to ESD tile that will save in material and labor costs. It is trouble free to install and maintain, and with its rich viscosity, it offers even distribution of conductive material and supreme coverage and a nice looking sheen. It is formulated with the finest high tech materals for consistent static protection.Premium Decorative ESD Protection Water - based polyurethane Non-hazardous Non-flammable Static dissipative Conforms to ESDA, ANSI standard S20.20-2007 Satin sheen Abrasion resistant - ASTM D4060 tabor tested Sovent resistant - MEK double rubsPhysical Properites of paint NSM549 floor paint tabor abrasion resistance tested to 2000 cycles (500 gram load) was .06 grams with no break through Coverage 250 - 300 square feet (23 m2 - 28 m2) per gallon at 2 mils (50 microns) Dry time 2-24 hours for moderate foot traffic, 7 days for full cure Gloss value at 60 degree angle - 20+% Material - water based polyurethane Resistivity - 106 - 108 ohms per square average Solvent resistance - MEK double rubs Static decay - <.03 seconds per FTMS 101B, Method 4046 Viscosity - 90-150 seconds at 77F (25C) VOC < 3 lbs/galloGraphic technology parameters of paint factory Product name: General purpose epoxy floor paintModel : NSM549Product features1 Eco-friendly and smooth like mirror2 Resistant to acid, salt, chemical solvent and oil corrosion, esp. to strong3 Hardness, abrasion resistant, flexible.Applicationsuitable for school, parking lot, microelectronic workshoppractical GMP standard pharmaceutical industry esp.Application MethodRoll and brushTechnical ParameterMixing Ratio: paint : curing agent = 4 : 1Coverage: 3-3.5sqm/kg Construction process1 Polish and clean the floor before painting2 Prime the floor with VIT General Purpose Epoxy Primer WGM-95633 Apply middle layer with mixture of primer/paint & quartz mortar 4 Polish and clean the surfacePaint one time or twice with General Purpose Epoxy Floor Top Paint WGM-9562 SOLVENTLESS EPOXY FLOOR PAINTTYPE A two-pack finish coating based on special solvent-less epoxy resin and hardener with chemicals resistance pigments. USES Anti-corrosive paint for chemical plants, power plants, steel factories. CHARACTERISTICS 1. Tough and hard coat film with very good adhesion. 2. Brush one coat can obtain above 200 microns.3. Excellent water and oil resistance 4. Excellent chemical resistance and anti corrosion. 5. Excellent mechanical wear resistance and electric insulation. COLOR Limited, please refer to color card GLOSS Above 85% DENSITY Above 1.35 Kg/L (mixture) VISCOSITY 90 ~ 110 KU (25 oC) DRYING TIME Set-to-touch 6 hrs. Dry hard 18 hrs. Full Dry 7 days (25 oC). OPTIMUM FILM THICKNESS Wet 375 microns Dry 350 microns MIXING RATIO Base : Hardener = 15 : 4(by weight) POT LIFE 30 minutes ( 25 oC) NON-VOLATILE CONTENT Above 95% (mixture) THINNER Epoxy Thinner(cleaning tools only) THINNER RATE0APPLICATION METHOD Trowel and brush. STORAGE SHELF LIFE Minimum 1 year under normal storage conditions. NOTE 1. Mix base and hardener according to mixing ratio and stir thoroughly then use completely in five minutes.2. Adhered moisture, grease, dirt, rusts and corrosive salts on substrate must be cleaned thoroughly.3. Avoid applying the paint in rainy weather or humidity above 85% RH, particularly a wet surface must be thoroughly dried.4. All equipments must be cleaned immediately after use. 5. When directly apply on the surface of cement products, the surface must be completely dried.6. When overcoating interval is exceeded, the paint film must be roughened to insure adhesion.Paint factory real photoPaint factory introductionJinwei Chemical Co., Ltd. is an enterprise combined with Research & Development, manufacture, marketing and construction. Experienced in manufacturing and construction of concrete flooring coatings and projects, in the past 10 years, we finished hundreds of successful flooring projects, totally, more than 1 million square meters flooring area. We have 4 efficient production lines mainly for producing the epoxy resin flooring coating and ware-resistance dry-shake flooring material, with production amount of 30000 ton at least, annually. We are the member of ASCC(American Society of Concrete Contractors), and we've imported some advanced equipment and new technology to improve our capability on flooring projects and materials production.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...