IPDB › China Industry › Chemicals
China, Chinese Waterproofing Agent Liquid Methyl Potassium Silicate1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Concrete,Mortar AdmixturesOther Concrete,Mortar AdmixturesMethyl Potassium SilicateLiquid Methyl Potassium Silicate
Caoxian Mycw Factory
Preview:
Product Description SPECIFICATIONSPotassium methyl silicate is an alkaline aqueous solution produced by the reaction of potassium hydroxide and methyl silicic acid, which can react with CO2 in the air or other acidic substances to form active substance polymethyl silicic acid and generate waterproofing properties. It is mainly used as a waterproofing agent for minerals.Methyl potassium silicate. This product should be diluted with water before use, which can generate surface waterproofing and reduce water absorption. It has the characteristics of being penetrable, absorbable, and able to maintain the natural appearance of the substrate. It can react with CO2 or other acidic compounds in the air to form a non-dissolvable, mesh-like waterproof and breathable membrane on the surface of the substrate, which has excellent waterproofing effects and anti-infiltration, moisture-proof, rust-proof, anti-aging, and anti-pollution advantages. It can prevent water from entering the substrate and thus reduce peeling caused by freeze-thaw and weathering, thereby extending the service life of the substrate. This product is easy to construct and has a low cost, long-lasting effects, resistance to scrubbing, and operability under high and low temperatures (-50~150oC).Liquid Methyl potassium silicate indexesActive ingredientMethyl potassium silicateApperanceColorlessSolid Total Content40Silicone content (active ingredient content)18PH13Density (25oC)1.1FlammabilityNon-flammable.Packing Liquid: 200kg plastic drums/iron drums, 1.2-1.4mt IBC, 24-27mt FLEXITANK or as clients' demandsDelivery wayby sea, by air, by rail way, by truckUsageThis product is mainly used for surface treatment of stone, brick, tile, concrete, cement mortar, perlite, gypsum and gypsum board, as well as wood, etc. It can also be used as an additive for water glass.Using methods:1. Clean the substrate surface before use. Remove water, dirt, and other adhesives from the surface of the substrate to be treated. If there are cracks, use putty or cement mortar to fill them. The substrate surface should be flat, solid, and free of hollowness, looseness, etc.2. Before application, slightly dampen the surface to be treated to allow absorption.3. Dilute it to 3% or lower when used. If a concentration higher than 3% is needed, it must be tested first. Using a high concentration may result in white residues on waterproof surfaces.4. The product can be applied using soaking, spraying, or brushing methods with a cloth, sponge, brush, roller, or sealant gun. It can also be mixed into concrete for use.5. After coating, allow the treated surface to air dry naturally. Do not apply a second coat before the surface is dry. If used for surface protection treatment on stone or ceramic tiles, wipe off the excess liquid with a soft cloth before the surface is dry using water. Keep the surface away from water for at least 24 hours for maintenance.Important Notes:1. Before using, it is recommended to conduct a small sample concentration test to determine if the concentration is suitable for your specific use.2. This product is highly corrosive and must not come into contact with skin directly. If contact occurs, rinse immediately with water. If it comes into contact with the eyes, rinse with water for 15 minutes and seek medical attention immediately. This product can also damage or kill plants, stain or corrode glass, plastic, aluminum, and most metals. Extreme care must be taken when spraying, as it should be avoided near plants or items coated with waterproofing agents. It should be stored out of reach of children when used for home decoration. However, the alkalinity of the product disappears after the coating dries, and it is harmless to humans.3. If the waterproofing agent is mixed too heavily or used excessively, a small amount of white sediment may form on the coated surface after drying. If it cannot be washed off or removed with a cloth, the surface will need to be scraped to remove it.4. If the temperature is too low in winter, the product may experience a crystalline structure freeze. Heating it back to room temperature will restore the solution to a transparent state, and the active ingredient will not be damaged, allowing for continued use.5. It is recommended to wear protective gloves and goggles during construction, and to avoid inhaling the gas produced by the product when working outdoors. In case of spraying or misting in enclosed spaces, local ventilation is advised.FAQA, Factory or trading companywe are the factory and also the agent of some factory have no exporting right;We are the factory and OEM, if your quantity is big enough, we could produce the lithium silicate as clients' demands. B, If could provide the free samplesThe new clients, 0-1kg samples are free, but the clients need to pay the express charge;Old clients, we could provide 0-1kg free samples, including the express charge C, The validity of goods2years D, DocumentsWe usually provide the BL, Commercial Invoice, Packing List, COA for free, if need other documents, kindly let us know, we see if need to increase the costs, thanks very much. E, Our markets50% used for local markets50% used for abroad markets(Middle east, Southeast Asia, South Asia, North America, Central and South America, South America, ect.)F, Other productsWe also produce the potassium silicate, potassium sodium silicate, lithium silicate, calcium formate, potassium sulphate, concrete hardner, concrete waterproofing agent, concrete sealer, concrete reparing agent, ect.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...