IPDB › China Industry › Metallurgy, Mineral & Energy
China, Chinese Fast Response Molten Iron Thermal Analysis Carbon Cup for Casting1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Industrial Products Supplier Manufacturer List Catalog
Refractory MaterialCarbon Composite Refractory MaterialCarbon CupThermal Analysis Cup
Cangzhou Sefu Ceramic New Materials Co., Ltd.
Preview:
Product Description Cangzhou Sefu Ceramic New Materials Co., Ltd.Add: Guanting Industrial Park, Cangzhou City, Hubei, China Product DescriptionQuick Response carbon cup for cast iron The thermal analysis carbon cups are used to quickly analyze carbon content, silicon content, and equivalent in molten iron. Carbon Cups are available in square and round shapes. The sampling carbon cups with accurate thermocouple assembly and Tellurium blob to get more reliable Thermal Analysis results - CE, C, Si. These are specially made for the High Carbon equivalent of Cast Iron giving consistent & accurate C & Si readings. Product DetailShapeSquare or Round ColorBrownish YellowMouth inside length36*36mmMouth outside length52*52mmBottom outside length45*45mmThickness8mmApplicationmeasure the carbon and silicon content of molten ironProduct Keywordsthermal analysis sampling cup, te cup, sampling thermal cup Features:The Smart Carbon Cup is well-engineered to feed accurate, reproducible, and consistent information on the cooling curve of molten metal.Very high accuracy of Carbon and Silicon.Guaranteed electrical contact throughout the test.Improved process control.Wide pouring temperature range.Well-matched with any thermal analysis system (Carbon Silicon Analyser)Using Method:1. Make the carbon cup put in the cup base with the positive and negative electrodes correctly installed, when the green light on the carbon and silicon analyzer is on.2. Make a spoon of clean molten iron in carbon cup. It is better to make sure the temperature of molten iron is 50-100 oC higher than liquid temperature. If the temperature of molten iron is too low, the liquid's temperature cannot be measured; if the temperature of molten iron is too high, it is likely to fuse the thermocouple wire. It is required that injected amount of molten iron is nearly 90-100% of the carbon cup. If the injected amount is too little, the temperature platform will become steep, and thus correct feature points cannot be recognized; if the injected amount is too much, molten iron will spill out, additives in carbon cups measuring components and performance of molten iron will lose and thus the carbon cup will not work. At this time, the green light on the carbon and silicon analyzer is off and the yellow light is on.3. In about 4 minutes, the yellow light is off, the red light is on, measurement finishes and measured data will be shown on the screen and in the meantime analytical data can be printed. After one measurement, the carbon cup used should be taken down as soon as possible, which can avoid the temperature rise of the cup base influencing subsequent measurement accuracy. Packing Inside packing: Filters are put in small boxes and Layered packaging. There is cardboard between each layer.Outside packing: Cartons&Pallets. Three-layer corrugated cartons and export special pallets.The mark on cartons can be designed according to the customer's request. Fast Response Molten Iron Thermal Analysis Carbon Cup for CastingDetailed PhotosFAQQ: Are you Factory?A: Definitely, we are a factory. Welcome to visit us!Q: What Parameters should I provide to you for a proper quotation?A: Application, pore size, dimension, color, quantity, packing requirements, trade terms. Q: How can you control your quality? A: For each production processing, we have a complete QC system for the chemical composition and physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001.Q: What is your lead time? It usually needs about 15- 20 days after receiving the PO.Q: Do you provide Samples?A: Yes, our factory provides samples for testing, pls send detailed parameters to us. (if customized, withdrawing is best) The samples will be charged or free according to the specific requirements.Q: What are the Payment Terms?A: We accept T/T, L/C, West Union, etc.Q: How can I get samples?A: We are honored to offer you the samples.Q: What about your Packing?A: We provide carton boxes, pallets, etc. OEM packing is available too.Q: Do you have R&D services?A: Yes, we have an R&D department to assist you in new product development.Q: Does your company accept customization?A: We accept OEM service.Q: Can we visit your company?A: Yes, for sure, you are welcome to visit our company.
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...